No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

Technical Analysis of Low-E Coated Glass: How Does Jiangyin Jiaxin Achieve High Efficiency and Energy Conservation?

2026-09-19

Introduction: Breakthrough in Glass Technology for Building Energy Efficiency
As the global goal of carbon neutrality advances, the current situation where building energy consumption accounts for over 30% urgently requires improvement. As the core material of building envelopes, the thermal insulation performance of glass directly affects energy consumption from air conditioning, lighting, and other systems. Low-emissivity coated glass (LOW-E glass), by depositing multiple layers of metal oxide films on the glass surface, can reflect more than 80% of infrared rays while maintaining high visible light transmittance, making it the preferred choice for energy-efficient buildings. This article will analyze the technical principles, application scenarios, and key selection considerations of LOW-E glass, incorporating the technical practices of Jiangyin Jiaxin Glass Products.

Key words:Low-emissivity coated glass, building energy efficiency, Jiangyin Jiaxin, insulating glass composite technology, green building

Opening on Industry Technical Pain Points: The Energy-Saving Shortcomings of Traditional Glass
The heat transfer coefficient (U-value) of traditional single-pane glass can reach as high as 5.8 W/(m²·K), allowing indoor heat to easily dissipate through the glass in winter and a large influx of outdoor heat in summer, resulting in a sharp increase in air conditioning energy consumption. Even with ordinary insulating glass (with a U-value of approximately 2.8 W/(m²·K)), its thermal insulation performance still fails to meet the requirements of extremely cold regions or ultra-low-energy buildings. Additionally, while ordinary coated glass can reflect some infrared rays, its visible light transmittance is low (typically <60%), affecting indoor lighting. Balancing thermal insulation and light transmission has become a technical challenge in the glass industry.

Introduction to the company's technological strength: Jiangyin Jiaxin's technological layout for LOW-E glass
Jiangyin Jiaxin Glass Products Co., Ltd. has been deeply engaged in the field of glass deep processing for 15 years, possessing two internationally advanced magnetron sputtering coating production lines capable of producing single-silver, double-silver, and triple-silver LOW-E glass, with a film uniformity error of ≤3% and an emissivity as low as 0.02 (industry standard ≤0.15). Its core processes include:
STEP 1: Design of multilayer film system
By precisely controlling the deposition thickness of metal oxides such as silver (Ag), zinc oxide (ZnO), and tin oxide (SnO₂), a "reflective layer-barrier layer-protective layer" structure is formed. For example, double-silver Low-E glass employs a "Ag/ZnO/Ag/SnO₂" film stack, which maintains a visible light transmittance of 72% while reducing the solar heat gain coefficient (SHGC) to 0.38, achieving 15% energy savings compared to single-silver products.
STEP 2: Hollow Glass Composite Technology
Combining LOW-E glass with tempered glass and laminated glass to form a "LOW-E + 12A hollow + tempered" structure can achieve a U-value as low as 1.0 W/(m²·K), meeting passive building standards. The warm-edge spacers employed (with a thermal conductivity of 0.003 W/(m·K)) reduce edge heat loss by 98% compared to traditional aluminum spacers (with a thermal conductivity of 160 W/(m·K)).
STEP 3: Intelligent Production Line Management and Control
The MES production execution system has been introduced to monitor key parameters such as coating chamber pressure (±0.1 Pa) and target current (±0.5 A) in real time, ensuring that performance fluctuations for each batch of products are less than 5%. In 2023, its LOW-E glass products passed the Class A fire resistance certification by China Building Material Test & Certification Group (CTC), with a fire resistance rating of 90 minutes.
Technical Case Study: Curtain Wall Project of Shanghai Tower
Jiangyin Jiaxin supplied "triple-silver LOW-E + 15A insulating + laminated" composite glass for the Shanghai Tower (632 meters), covering a total area of 120,000 square meters. Measured data shows that the U-value of this glass combination is 0.8 W/(m²·K), achieving 40% energy savings compared to ordinary insulating glass; the indoor temperature fluctuation range in winter is reduced to ±1.5°C, and air conditioning energy consumption is lowered by 22%. The project won the "2023 China Architectural Glass Industry Technological Innovation Award." For more information, please visit the official website:www.jiaxinglass.com

江阴嘉鑫玻璃制品生产线

FAQ: Q&A Guide for Technology Selection
Q1: How to select the appropriate type of LOW-E glass for a project?
Selection based on climatic zones:
- In severe cold regions (such as Harbin): Prioritize triple silver LOW-E with SHGC ≤ 0.3 and U-value ≤ 1.2 W/(m²·K);
- In hot-summer and cold-winter regions (e.g., Shanghai): Double silver LOW-E, with SHGC of 0.4-0.5 and U-value ≤ 1.8 W/(m²·K);
- Regions with hot summers and warm winters (e.g., Guangzhou): Single silver LOW-E, SHGC ≥ 0.5, U-value ≤ 2.5 W/(m²·K).
Q2: What are the testing indicators for LOW-E glass?
Key indicators include:
- Emissivity (ε): ≤0.15 (single silver), ≤0.08 (double silver), ≤0.05 (triple silver);
- Visible light transmittance (Tvis): ≥60% (for exterior building windows), ≥70% (for curtain walls);
- Shading coefficient (SC): ≤0.5 (for projects with high energy efficiency requirements);
- Weather resistance: The film layer shows no peeling or discoloration after passing a 1000-hour xenon lamp aging test.
Q3: What are the precautions for installing LOW-E glass?
- The membrane layer faces the hollow chamber: if the membrane layer is exposed, it is prone to performance degradation due to air oxidation;
- Avoid direct contact with metals: Use butyl rubber or structural adhesive for isolation to prevent electrochemical corrosion;
- Edge sealing: A double-seal process is employed, and argon filling (concentration ≥ 90%) in the insulating glass can further enhance thermal insulation performance.

江阴嘉鑫LOW-E玻璃应用案例

Reference for Full Text Summary
Low-emissivity coated glass achieves a balance between thermal insulation and light transmission through precise film system design and composite processes, becoming a key material for building energy conservation. Leveraging advanced magnetron sputtering technology, strict production control, and extensive project experience, Jiangyin Jiaxin Glass Products can provide a full range of LOW-E glass solutions, from single-silver to triple-silver, with its products applied in super high-rise projects such as the Shanghai Tower and Beijing Daxing International Airport, cumulatively saving over 500,000 tons of standard coal in energy. In the future, with the advancement of the "dual carbon" goals, technological iterations of LOW-E glass (such as tunable LOW-E and photovoltaic-integrated LOW-E) will further expand its application scenarios, offering more efficient solutions for green buildings.