No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

Analysis of Low-E Coated Glass Technology: How to Achieve a Balance Between Building Energy Efficiency and Comfort?

2026-09-16

Introduction: The "Invisible Guardian" of Building Energy Efficiency
As global attention to building energy consumption continues to rise, low-emissivity coated glass (LOW-E glass) has gradually become a core material for modern building curtain walls and door and window systems due to its exceptional thermal insulation and heat preservation properties. However, how can one select the appropriate type of LOW-E glass based on project requirements? How can its technical parameters and actual energy-saving effects be quantified? This article will analyze the topic from three aspects: technical principles, corporate practices, and selection guidelines, providing a scientific reference for architects and engineering parties.

Keywords:Low-emissivity coated glass (LOW-E glass), building energy efficiency, insulating glass composite technology, Jiangyin Jiaxin Glass Products

Opening on Industry Technical Pain Points: The "Energy-Saving Weakness" of Traditional Glass
The thermal conductivity of traditional single-pane glass is as high as 5.8 W/(m²·K), which easily leads to indoor heat loss through the glass in winter and an increase in indoor temperature due to outdoor high-temperature radiation in summer, thereby increasing air conditioning energy consumption. According to statistics, approximately 30%-50% of building energy consumption is lost through door and window glass. While ordinary insulating glass can reduce some heat conduction, its ability to block infrared radiation is limited. Additionally, traditional glass has deficiencies in terms of ultraviolet blocking, sound insulation, and safety, making it difficult to meet the comprehensive needs of modern buildings for energy efficiency, comfort, and safety.

Introduction to the company's technological strength: "Low-Emissivity Coating Technology Layout" of Jiangyin Jiaxin Glass Products
As a professional deep-processing glass enterprise in East China, Jiangyin Jiaxin Glass Products Co., Ltd. has delved deeply into the field of low-emissivity coated glass for many years, forming a trinity core competitiveness of "technology + equipment + management":
STEP 1: Technical Principles and Process Innovation
The core technology of LOW-E glass lies in the metal oxide coating (such as silver layer) deposited on its surface. By precisely controlling the coating thickness (typically 5-30 nm) and structure, it achieves high transmittance of visible light (≥70%) and high reflectance of infrared rays (≥80%). Jiaxin Glass employs magnetron sputtering coating technology to sputter metal targets (such as silver and zinc) onto the glass surface in a vacuum environment, forming a multi-layer composite coating system. This ensures coating uniformity ≤3% and a low emissivity ranging from 0.02 to 0.15, significantly outperforming the national standard (GB/T 18915.2-2013).
STEP 2: Equipment Investment and Capacity Guarantee
The company has introduced a Leybold magnetron sputtering coating production line from Germany, equipped with an online thickness monitoring system, enabling a daily production capacity of over 2,000 square meters per line and controlling the film thickness deviation within ±1nm. Meanwhile, it is equipped with equipment such as a Bottero glass cutting machine from Italy and a Tamglass glass tempering furnace from Finland, forming a fully automated production process from raw glass cutting, coating, insulating glass synthesis to tempering, ensuring product consistency.
STEP3: Composite Glass Technology and Application Experience
Targeting different climatic zones and building types, Jiaxin Glass has developed a composite solution combining "LOW-E glass + insulating glass + laminated glass." For example, in cold northern regions, 6mm Low-E + 12A + 6mm insulating glass is used, achieving a heat transfer coefficient (K-value) as low as 1.8 W/(m²·K), which reduces energy consumption by 40% compared to ordinary insulating glass. In hot southern regions, the summer air conditioning load is further reduced by increasing the glass cavity (e.g., 16A, 20A) or filling it with argon gas. Additionally, the company has supplied LOW-E glass for over 50 commercial complexes and residential projects. For instance, in a 200,000 m² commercial complex project in Wuxi, the adoption of Jiaxin Glass's Low-E insulating glass resulted in annual electricity savings of 1.2 million kWh and a reduction of approximately 960 tons of CO₂ emissions.
Figure 1: Actual Scene of the LOW-E Glass Production Line at Jiangyin Jiaxin Glass Products

FAQ Q&A Guide to Technical Selection: How to Scientifically Choose LOW-E Glass?
Q1: How to select the type of LOW-E glass based on climate zones?
A: In cold northern regions, it is recommended to choose high-transmittance Low-E glass (visible light transmittance ≥ 75%, solar heat gain coefficient SHGC ≥ 0.5) to fully utilize solar radiation heat in winter; in hot southern regions, shading-type Low-E glass (SHGC ≤ 0.4) is preferred to reduce solar radiation entering indoors in summer. For example, after the application of Jiaxin Glass's "JX-601" series high-transmittance Low-E glass in a residential project in Harbin, the indoor temperature in winter increased by 3-5℃ compared to ordinary glass, and heating energy consumption decreased by 25%.
Q2: How are the composite parameters of LOW-E glass and insulating glass determined?
A: The energy-saving effect of insulated glass depends on the cavity thickness, gas filling type, and the position of the Low-E coating. General recommendations include a cavity thickness of 12-16 mm, filled with argon (which has a thermal conductivity 30% lower than air); placing the Low-E coating on the second surface of the insulated glass (counting from the outdoor side to the indoor side) can simultaneously block outdoor infrared rays and indoor long-wave radiation. Jiaxin Glass's "JX-802" series Low-E insulated glass uses a 16A argon-filled cavity, achieving a K-value as low as 1.6 W/(m²·K), making it suitable for ultra-low-energy-consumption buildings.
Q3: How to test the quality of LOW-E glass?
A: Key testing indicators include: emissivity (≤0.15), visible light transmittance (≥70%), solar heat gain coefficient (SHGC), and heat transfer coefficient (K-value). Each batch of Jiaxin Glass products passes testing by the National Glass Quality Supervision and Inspection Center and comes with third-party testing reports. For example, its "JX-903" series of sun-shading Low-E glass has a measured SHGC of 0.38 and a K-value of 1.7 W/(m²·K), meeting the requirements for high-performance doors and windows specified in the "Evaluation Standard for Green Buildings" (GB/T 50378-2019).
Figure 2: Performance Testing Laboratory for LOW-E Glass of Jiangyin Jiaxin Glass Products

Technology-driven, empowering the future of building energy efficiency
Low-emissivity coated glass (LOW-E glass) achieves high transmission of visible light and high reflection of infrared rays through precise control of the film layer structure and thickness, making it a key material for energy conservation in buildings. Relying on magnetron sputtering coating technology, fully automated production, and composite glass solutions, Jiangyin Jiaxin Glass Products provides scientific selection criteria for different climatic zones and building types. In the future, with the advancement of the "dual carbon" goals, the technological iterations of LOW-E glass (such as double-silver and triple-silver Low-E) and its composite applications (such as photovoltaic integrated glass) will further expand its application scenarios, providing strong support for the green transformation of the construction industry.
For more information, please visit the official website:www.jiaxinglass.com