No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

Analysis of Low-E Coated Glass Technology: How Does Jiangyin Jiaxin Achieve High Efficiency and Energy Conservation?

2026-09-16

Introduction: Breakthrough in Glass Technology for Building Energy Efficiency
With the advancement of global carbon neutrality goals, the issue of building energy consumption has become increasingly prominent. Data shows that building energy consumption in China accounts for 21% of total social energy consumption, with heat loss through doors, windows, and glass contributing over 50%. Low-emissivity coated glass (LOW-E glass) has become a key material in the field of building energy efficiency due to its excellent thermal insulation properties. Jiangyin Jiaxin Glass Products Co., Ltd. has achieved an industry-leading low emissivity level of 0.08 for LOW-E glass through its independently developed magnetron sputtering coating technology, and this article will systematically analyze its technical pathway and application value.

Key words:Low-emissivity coated glass, magnetron sputtering technology, building energy efficiency, Jiangyin Jiaxin, emissivity control

Opening on Industry's Technological Pain Points: Energy-Saving Dilemma of Traditional Glass
Traditional single-pane glass has a high emissivity of 0.84, leading to substantial heat loss from indoors via radiation in winter and increased air conditioning loads due to outdoor thermal radiation in summer. STEP 1: Conventional insulating glass improves thermal insulation through an air layer, but its emissivity remains constrained by the glass substrate, making it difficult to reduce the overall U-value (thermal transmittance) below 1.8 W/(m²·K). STEP 2: Online LOW-E glass achieves coating through chemical vapor deposition (CVD) technology, but the coating suffers from poor weather resistance and is prone to oxidation and discoloration. STEP 3: Offline LOW-E glass employs magnetron sputtering for a more complex coating structure, yet domestic enterprises generally face challenges such as insufficient equipment precision and difficulties in controlling process parameters, resulting in a product yield below 85%. Jiangyin Jiaxin has significantly enhanced product stability by introducing German Leybold vacuum coating equipment and integrating a self-developed intelligent parameter control system, reducing coating uniformity errors to within ±2%.

江阴嘉鑫玻璃制品生产线

Introduction to the company's technological strength: Triple breakthroughs in magnetron sputtering technology
Jiangyin Jiaxin's LOW-E glass technology system revolves around three key dimensions: equipment, process, and inspection: Step 1: At the equipment level, it employs Germany's Leybold OPAL series magnetron sputtering equipment, equipped with 24 cathode target positions, enabling precise deposition of six-layer film systems with a thickness control accuracy of ±0.5nm. Step 2: At the process level, through its independently developed "Dynamic Pressure Compensation Algorithm," it adjusts the argon/nitrogen flow ratio in real-time during the coating process to ensure uniform film stress. For instance, when producing a 6mm+12A+6mm triple-glazed, double-cavity structure, the argon filling rate in the hollow layer can reach 95%, which is 10 percentage points higher than the industry average. Step 3: At the inspection level, it incorporates the U.S.-made LAMDA950 spectrophotometer to monitor spectral transmittance in real-time across the 380-2500nm wavelength range, ensuring key performance indicators such as a product emissivity ≤0.08, visible light transmittance ≥70%, and total solar energy transmittance ≤40%. Practical cases demonstrate that in a super high-rise project in Nanjing, the curtain wall system using Jiaxin's LOW-E glass reduced the building's overall energy consumption by 23%, saving 1,200 tons of standard coal annually.

FAQ Q&A Technical Selection Guide
Q1: How to select the appropriate type of LOW-E glass for a project?
A: It is necessary to comprehensively consider climate zoning, building orientation, and energy-saving goals. STEP 1: In cold regions (e.g., Harbin), high-transmittance LOW-E glass should be prioritized, with a visible light transmittance ≥ 75% and a total solar energy transmittance ≥ 50%, to maximize the utilization of solar thermal energy. STEP 2: In hot-summer and cold-winter regions (e.g., Shanghai), shading-type LOW-E glass is recommended, with a total solar energy transmittance ≤ 35%, effectively blocking summer thermal radiation. STEP 3: Jiangyin Jiaxin provides customized services, adjusting the silver layer thickness (8-25 nm) and the silicon oxide protective layer thickness (20-50 nm) according to project requirements, enabling precise control of emissivity within the range of 0.05-0.15.
Q2: How are LOW-E glass and insulating glass combined?
A: The triple-glazed, dual-cavity structure is currently the optimal solution. STEP 1: The outer pane uses 6mm tempered LOW-E glass, the middle pane uses 4mm ordinary float glass, and the inner pane uses 6mm tempered clear glass, with the cavity layers filled with 90% argon gas, respectively. STEP 2: Test data from Jiangyin Jiaxin shows that this structure achieves a U-value as low as 0.7 W/(m²·K) and a sound attenuation of 36 dB, meeting the three-star green building standard. STEP 3: Attention should be paid to the dosage of molecular sieve in the cavity (≥150 g/m²) and the butyl sealant coating width (≥3 mm), as failure to do so may lead to condensation risks.
Q3: How to prevent oxidation of the coating on LOW-E glass?
A: The key lies in the encapsulation process. STEP 1: Jiangyin Jiaxin adopts the "double-seal + warm-edge spacer" technology, using butyl rubber for the first seal and polysulfide or silicone sealant for the second seal, ensuring a water vapor transmission rate of ≤0.1 g/(m²·day). STEP 2: The warm-edge spacer features a composite structure of stainless steel and thermal insulation strip, with a linear heat transfer coefficient of ≤0.007 W/K, representing an 80% reduction compared to aluminum spacers. STEP 3: In actual cases, Jiaxin's products have passed a 2,000-hour salt spray test and a 5,000-cycle thermal cycling test, maintaining a coating integrity rate of over 99.2%.

江阴嘉鑫LOW-E玻璃应用案例

Reference for full text summary
The technological evolution of low-emissivity coated glass is upgrading from single heat insulation to comprehensive performance optimization. Jiangyin Jiaxin Glass Products has established a full-chain technological advantage covering design, production, and installation through equipment localization, intelligent control of process parameters, and standardized construction of testing systems. Its LOW-E glass products have passed multiple certifications, including CCC, CE, and ISO9001, and have served over 200 key projects, with emissivity control precision reaching international advanced levels. In the future, with the research and development of double-silver/triple-silver LOW-E glass and dimmable smart glass, Jiangyin Jiaxin will continue to lead the technological transformation of energy-efficient building glass.For more information, please visit the official website: www.jiaxinglass.com