No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com
Introduction: The Dual Challenges of Energy Efficiency and Aesthetic Needs in Architecture
With the advancement of green building standards, architectural glass must simultaneously meet core requirements such as high thermal insulation efficiency, high light transmittance, and low reflectivity. Low-emissivity coated glass (LOW-E glass), thanks to its functional layer of metal oxides coated on the surface, can effectively block infrared radiation and reduce heat exchange between indoors and outdoors, making it the preferred material for modern building curtain walls, doors, and windows. However, balancing the light transmittance and thermal insulation of the coated layer, as well as optimizing the sealing performance of insulating glass, remain technical challenges in the industry. This article takes the LOW-E glass processing technology of Jiangyin Jiaxin Glass Products as an example to analyze the specific pathways through which it achieves breakthroughs in product performance via equipment upgrades and process optimization.
Keywords:Low-emissivity coated glass (LOW-E glass), insulating glass, building energy efficiency, Jiangyin Jiaxin Glass Products, optimization of coating layer structure
Industry Technical Pain Points at the Beginning: Three Major Contradictions in the Application of LOW-E Glass
STEP1:The contradiction between light transmittance and thermal insulationThe thickness of the coating layer and the proportion of metal oxides in traditional LOW-E glass directly affect its light transmittance (visible light transmittance) and emissivity (thermal radiation blocking capability). For instance, single-silver LOW-E glass can achieve a light transmittance of over 80%, but its emissivity is only 0.15-0.2; although double-silver or triple-silver structures can further reduce emissivity to below 0.05, the light transmittance drops to 60%-70%, making it difficult to meet the high demands for natural lighting in commercial buildings.
STEP2:The contradiction between sealing performance and service lifeThe thermal insulation performance of insulating glass relies on the sealing property of the spacer bars. Ordinary aluminum spacer bars have a high thermal conductivity of up to 160 W/(m·K), which easily leads to the cold bridge effect. In contrast, warm edge spacer bars (such as a composite structure of stainless steel and butyl rubber) can reduce the thermal conductivity to below 1.0 W/(m·K), but they require extremely high processing precision, as even slight deviations can cause issues such as air leakage and condensation, thereby shortening the product's service life.
STEP3:The contradiction between cost and performanceThe coating layers of triple silver LOW-E glass require the deposition of three silver layers through magnetron sputtering technology, resulting in equipment investment costs increasing by over 50% compared to single silver structures. Meanwhile, the argon filling process for insulating glass necessitates a dedicated gas circulation system, further driving up production costs and limiting its promotion in the low- to mid-end construction market.
Introduction to the company's technological strength: Jiangyin Jiaxin's "Three-Stage Optimization" Solution
STEP1:Optimization of Coating Layer Structure: Precise Regulation from Single Silver to Double SilverJiangyin Jiaxin has introduced Germany Leybold's magnetron sputtering coating line, achieving precise control over the coating layer thickness from 25nm (single silver) to 45nm (double silver) by adjusting the target material ratio (increasing the silver layer proportion from 12% in single silver to 18% in double silver) and sputtering power (from 15kW/m² to 25kW/m²). Measured data shows that its double-silver LOW-E glass achieves a visible light transmittance of 72% and a low emissivity of 0.03, enhancing energy efficiency by 25% compared to traditional single-silver products.
STEP2:Upgrade of Insulating Glass Sealing Process: Warm Edge Spacer + Fully Automatic Sealant Application LineTo address the pain point of sealing performance, Jiaxin adopts Swiss Technoform warm-edge spacer bars. Their composite structure of stainless steel substrate and butyl rubber reduces the thermal conductivity to 0.8 W/(m·K). When combined with Germany's Bystronic fully automatic insulating glass sealing line (with a sealing speed of 12 m/min and a glue joint width error of ≤0.1 mm), it ensures an argon filling rate of ≥95% in insulating glass, a gas leakage rate of ≤0.1%/year, and extends the service life to over 25 years.
STEP3:Cost Control: Large-scale Production and Process StandardizationBy integrating the coating line with the insulating glass production line (with a single-line daily production capacity of 3,000 square meters), Jiaxin has reduced the comprehensive cost of double-silver LOW-E insulating glass by 15% compared to similar products on the market; meanwhile, by formulating the "LOW-E Glass Processing Technology Standards" (covering 12 key indicators such as pre-coating cleaning, sputtering parameters, and laminating temperature for insulating glass), the company has increased the product yield rate from 85% to 98%.
Real-life case: Curtain wall project of Shanghai TowerThis project selects Jiaxin Shuangyin LOW-E insulated glass (specification: 6mm+12A+6mm, light transmittance of 70%, shading coefficient of 0.45). Through actual measurements, the indoor temperature in summer is 3-5℃ lower than that with ordinary glass, and air conditioning energy consumption decreases by 22%. In winter, through the reflection of indoor long-wave radiation by the coated layer, the heat retention rate increases by 18%. The overall energy-saving rate of the project reaches 30%, and it has obtained LEED Gold certification.
FAQ: Q&A Technical Selection Guide
Q1: How to select the type of LOW-E glass based on building types?
STEP1:Commercial buildings (such as office buildings and shopping malls)Priority should be given to double-silver or triple-silver LOW-E glass combined with an insulating structure (spacer layer thickness ≥ 12mm) to balance the requirements for high light transmittance (≥ 65%) and low shading coefficient (≤ 0.5). For example, the 6mm+15A+6mm triple-silver LOW-E insulating glass provided by Jiaxin for Nanjing Golden Eagle World has a light transmittance of 68% and a shading coefficient of 0.4, reducing cooling energy consumption by 28% in summer.
STEP2:Residential buildingsSingle silver LOW-E glass can meet the requirements (light transmittance ≥ 80%, shading coefficient 0.6-0.7). When combined with Low-E laminated glass (e.g., 6mm + 0.76PVB + 6mm), it enhances safety and sound insulation performance. The single silver LOW-E laminated insulating glass (6mm + 0.76PVB + 6mm + 12A + 6mm) provided by Jiaxin for a high-end residential project in Suzhou achieves a weighted sound reduction index of 42dB, meeting the five-star sound insulation standard.
STEP3:Public buildings (such as schools and hospitals)It is necessary to balance energy efficiency and lighting uniformity. It is recommended to choose a combination of double-silver LOW-E glass (with a light transmittance of 70%-75%) and ultra-clear glass (such as 6mm ultra-clear + 12A + 6mm double-silver LOW-E), which can reduce the spontaneous glass breakage rate (the iron content in ultra-clear glass is ≤0.015%, and the spontaneous breakage rate is ≤0.1%) and improve light transmittance uniformity.
Q2: What are the key parameters in the processing of LOW-E glass?
STEP1:Cleaning parameters before coatingPure water (conductivity ≤ 5 μS/cm) should be used for cleaning, with the water temperature controlled at 40-50°C to remove oil stains, dust, and other impurities from the glass surface, thereby avoiding any impact on the adhesion of the coating layer.
STEP2:Magnetron sputtering parametersThe purity of target materials (such as silver, zinc, tin, etc.) must be ≥99.99%, and the sputtering gas pressure should be controlled within 0.3-0.5 Pa to ensure the uniformity of the coating layer (with a film thickness deviation ≤ ±5%).
STEP3:Parameters for hollow laminatingThe temperature in the laminating room should be controlled at 20-25℃ and the humidity at ≤40% to prevent butyl rubber from failing due to excessive humidity; after sealing the insulating glass, it should be left to stand for 24 hours in a constant temperature and humidity chamber (temperature 23±2℃, humidity 50±5%) to ensure complete curing of the adhesive layer.
Q3: How to test the quality of LOW-E glass?
STEP1:Light transmittance detectionUse a spectrophotometer (such as PerkinElmer Lambda 950 from the United States) to measure the visible light transmittance within the wavelength range of 380-780 nm, with the acceptance criterion being ≥ the design value ± 2%.
STEP2:Emissivity detectionAn infrared emissivity tester (such as Germany's Infratec VarioCAM) is used to measure the emissivity of the glass surface within the wavelength range of 8-14 μm, with the acceptable criteria being ≤0.15 (for single silver) or ≤0.05 (for double/triple silver).
STEP3:Sealing performance testingThe argon content in the spacer layer of the insulating glass is measured using an argon detector (e.g., Innovate 3750 from the United States), with a pass criterion of ≥90%. Meanwhile, a negative pressure test (at -80 kPa for 5 minutes) is conducted to observe whether the glass deforms or leaks, thereby verifying the sealing reliability.
For more information, please visit the official website:www.jiaxinglass.com
Reference for Full-text Summary
The technological upgrading of low-emissivity coated glass (LOW-E glass) should focus on three core aspects: coating layer structure, insulating glass sealing process, and cost control. Jiangyin Jiaxin Glass Products has achieved a technological breakthrough by introducing a German magnetron sputtering coating line, Swiss warm-edge spacers, and a fully automatic sealing line, enabling a light transmittance of 72% and an emissivity of 0.03 for double-silver LOW-E glass. Additionally, through large-scale production, the company has reduced costs by 15%, providing cost-effective energy-saving solutions for commercial buildings, residential properties, and public structures. In the future, with the maturation of triple-silver LOW-E glass and vacuum LOW-E insulating glass technologies, the energy efficiency of architectural glass is expected to further improve, driving green buildings toward the goal of "zero energy consumption."