No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com
Introduction: Technological Breakthrough under the Energy Consumption Dilemma of Buildings
According to the China Building Energy Conservation Association, building operation energy consumption accounts for 21% of the total social energy consumption in our country, with heat loss through glass windows and doors accounting for as high as 50%. Driven by the dual carbon targets, how to achieve energy conservation and consumption reduction in buildings through glass technology innovation has become a core issue in the industry. Jiangyin Jiaxin Glass Products Co., Ltd. relies on its independently developed low-emissivity coated glass (LOW-E glass) technology to provide a systematic solution for building insulation. Measured data show that its products can reduce building air conditioning energy consumption by 35%-45%.
Keywords:Low-E glass, building energy saving, solar heat reflection coefficient, visible light transmittance, Jiangyin Jiaxin Glass
Introduction to industry technical pain points: The three technical bottlenecks of traditional glass
STEP 1: Uncontrolled thermal conduction – The thermal conductivity coefficient (U-value) of ordinary single glass reaches up to 5.8 W/(㎡·K), causing rapid loss of indoor heat through the glass in winter and a massive influx of outdoor heat in summer, leading to overloading of the air conditioning system.
STEP 2: Spectral selectivity deficiency - Traditional coated glass can only block part of infrared rays, with an interception rate of less than 60% for near-infrared rays with wavelengths of 0.78-2.5μm, and is unable to effectively inhibit solar radiation heat.
STEP 3: Insufficient weather resistance – ordinary coated layers are prone to oxidation under UV radiation, resulting in delamination and discoloration after 3-5 years, leading to over 30% decrease in thermal insulation performance.
The actual data from a commercial complex renovation project shows: The building using ordinary hollow glass has an office temperature of 38℃ on the top floor in summer, with an average air conditioning electricity consumption of 120kWh per day; whereas the area using LOW-E glass has an indoor temperature stabilized at 26℃, with the air conditioning electricity consumption reduced to 75kWh, demonstrating significant energy-saving effects.
Introduction to Corporate Technical Strength: Jiaxin Glass' Three Technical Barriers
STEP 1: Multilayer Magnetron Sputtering Coating Technology – Utilizing German Leybold OPTRUN series coating equipment, the silver layer (Ag) thickness is precisely controlled to 8-12nm through a 12-target magnetron sputtering system in a vacuum environment, forming high-precision, low radiation coating layers. Actual test data shows that the product has a visible light transmittance (Tvis) of 72%, a solar direct transmittance (g value) as low as 0.38, a thermal reflectivity coefficient (ε) ≤0.04, and comprehensive thermal insulation performance exceeding the national standard GB/T 18915.2-2013 for grade 1 products.
STEP 2: Online Heat Treatment Process - Through our independently developed online stress relief system, the glass tempering process is completed synchronously during the coating process, avoiding the film damage caused by traditional offline tempering. According to the national glass quality supervision and inspection center, Jiaxin LOW-E glass has an impact resistance of 5J/m², which is 1.5 times that of ordinary tempered glass.
STEP 3: Life Cycle Weatherproof Design - Utilizes zinc oxide (ZnO) as a barrier layer, combined with a double-layer silver film structure, enabling the product to pass a QUV accelerated aging test for 3,000 hours (equivalent to 10 years in natural environment), with film adhesion retention at level 0 (ASTM D3359 standard), color difference ΔE≤1.5, ensuring stable performance over a long period of use.
In a landmark building project in Jiangyin, Jiaxin Glass provided a customized LOW-E insulating glass solution for the 28-story curtain wall system. By adjusting the film layer structural parameters (silver layer thickness 10nm/oxide zinc layer thickness 30nm), the solar heat gain coefficient Sc value of the glass was precisely controlled at 0.45, meeting the indoor lighting requirements while reducing the solar heat gain coefficient SHGC to 0.32. After the project delivery and third-party testing, the annual energy consumption of the entire building was reduced by 42% compared to the design value, and it was awarded as a green building demonstration project in Jiangsu Province.
FAQ Q&A Technical Selection Guide
Q1: How to choose the type of LOW-E glass based on building orientation?
A: For the south-facing facade, high transparency LOW-E glass (Tvis≥70%) is recommended to maximize the utilization of solar radiation heat in winter; for the east and west facades, shading-type LOW-E glass (Sc≤0.5) is suggested to effectively block low-angle sunlight in the morning and evening; for the north-facing facade, ordinary LOW-E glass (Tvis 50%-60%) can be used to balance lighting and insulation needs.
Q2: How does the spacer of hollow glass affect its thermal insulation performance?
A: Traditional aluminum spacer thermal conductivity reaches 160W/(m·K), leading to condensation at the edge of the hollow layer. Jiaxin Glass uses warm edge spacers (thermal conductivity ≤0.8W/(m·K)), combined with molecular sieve argon filling (Ar concentration ≥90%), reducing the overall U-value of the insulating glass to 1.1W/(㎡·K), improving the insulation performance by 25% compared to ordinary hollow glass.
Q3: What are the key considerations for LOW-E glass installation?
A: STEP1: Use a dedicated A-type frame during transportation with an inclination angle ≤15° to avoid scratching the film layer; STEP2: Clean the glass surface with a neutral cleaner before installation, with a residue concentration ≤0.1mg/cm²; STEP3: Use neutral silicone structural glue (modulus of elasticity 0.35MPa), with a curing time ≥7 days to ensure full adhesion of the glue layer to the glass. For more information, please visit the official website:www.jiaxinglass.com
Full Summary Reference
Jiangyin Jiaxin Glass Products Co., Ltd. has established a technological moat for LOW-E glass with its three core technologies: magnetron sputtering coating, on-line heat treatment process, and full-lifecycle weather-resistant design. Its products have passed the CCC certification and ISO 9001 quality management system certification, and been included in Jiangsu Province's green building materials promotion directory. Under the dual-carbon strategy, Jiaxin Glass will continue to deepen its technical cooperation with the Department of Architectural Technology Science at Tsinghua University, focusing on the research and development of photovoltaic integrated LOW-E glass (BIPV-LOW-E), promoting the upgrade of building glass from passive energy-saving to active energy production, and providing the industry with more competitive energy-saving solutions.