No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

Low Radiation Coated Glass Application Pain Points Solved: Jiangyin Jiaxin's Technological Innovation Path

2026-09-10

Introduction: Technological Innovation Breaks Industry Bottleneck
With the continuous increase in demand for building energy saving and green home decoration, low-emissivity coated glass (LOW-E glass) has become a market focus due to its excellent heat-insulating properties. However, traditional LOW-E glass has significant shortcomings in scratch resistance, film stability, and compatibility with composite processing, which restrict its large-scale application. Jiangyin Jiaxin Glass Products Co., Ltd. has successfully overcome multiple technical challenges by introducing advanced international equipment and independently developed technology, and its products have been widely used in iconic projects such as Shanghai Tower and Suzhou Center. This article will systematically analyze Jiaxin Glass's breakthrough path in technology from three dimensions: technical pain points, solutions, and practical guidelines.

Keywords:Low radiation coated glass, film stability, composite processing, building energy saving, Jiangyin Jiaxin

Introduction to industry technical pain points: The three technical bottlenecks of LOW-E glass
STEP1:Insufficient scratch resistance of coating layerThe hardness of the LOW-E glass film layer prepared by the traditional magnetron sputtering process is only 3-4H, which is prone to scratching during transportation and installation, resulting in a decrease in light transmittance over 15%. A commercial complex project had a rework rate of up to 20% due to film layer scratches, with direct economic losses exceeding 500,000 yuan.
STEP2:Poor compatibility for composite processingLow-E glass, when compounded with hollow and laminated processes, is prone to oxidation due to high temperature and pressure, leading to a radiation rate increase from 0.15 to over 0.3. A high-end residential project suffered a failure in compound processing, resulting in an 18% increase in winter heating energy consumption and a sharp rise in customer complaints.
STEP3:Long-term stability questionableIn environments with humidity >70%, traditional LOW-E glass films are prone to hydrolysis reactions, with the light transmission rate degrading by up to 8% within 3 years. A landmark building in a coastal city had to replace the entire glass due to film failure after 5 years, with maintenance costs exceeding ten million yuan.
LOW-E玻璃膜层结构示意图

Introduction to Corporate Technical Strength: Jiaxin Glass' Three-dimensional Breakthrough Path
STEP1:Equipment Upgrade: Introduction of German Leybold vacuum coating production lineThis production line is equipped with a multi-target magnetron sputtering system, which can achieve precise control of film thickness to ±2nm and increase film hardness to above 6H. According to third-party testing, after 1000 times of steel wool abrasion test, the transparency of Jiaxin LOW-E glass has only decreased by 0.3%, far superior to the industry standard of 2%.
STEP2:Process Innovation: Development of Low-Temperature Composite Processing TechnologyBy optimizing the edge sealant formula and the hollow layer inflation process, the composite processing temperature is reduced from 180℃ to 120℃, and the film oxidation rate is lowered to below 0.05%. In the Shanghai Tower project, the radiation rate of Jiaxin Composite Glass is stabilized at 0.12, with an annual energy-saving benefit of 3.2 million yuan.
STEP3:Material Innovation: Nanoscale Superhydrophobic CoatingSilicon dioxide nanoparticles with a thickness of 50nm are deposited on the surface of the film, achieving a contact angle of 115° and reducing the hydrolysis reaction rate by 90%. After 5 years of actual testing, Jiaxin LOW-E glass has only a 1.2% transmittance attenuation in coastal high-humidity environments, with a lifespan extended to over 15 years.
For more information, please visit the official website: www.jiaxinglass.com

FAQ Q&A Technical Selection Guide
Q1: How to choose the suitable type of LOW-E glass?
A: Select based on climate zones: High transparency (transmittance > 80%) for cold regions, and shading type (shading coefficient < 0.5) for hot summer and warm winter areas. Jiaxin Glass offers customized film coating design, with the lowest radiation rate reaching 0.08.
Q2: What parameters should be paid attention to during composite processing?
A: The processing of hollow glass requires controlling the inflation pressure to 0.5MPa, and the edge sealant curing temperature should not exceed 60℃; for laminated glass, EVA film should be selected, and the lamination temperature should be controlled at 110-120℃. Jiaxin offers a complete set of process parameters, which can reduce the scrap rate by 30%.
Q3: How to inspect the quality of LOW-E glass?
A: Key indicators include radiation rate (≤0.15), light transmittance (60-85%), and film hardness (≥5H). Jiaxin products have passed the certification of the National Glass Quality Supervision and Inspection Center, with a test report attached to each batch.
嘉鑫玻璃生产线实景

Summary Reference: Technologically Driven Value Upgrade
Jiangyin Jiaxin Glass Products has successfully solved the technical challenges of LOW-E glass in terms of scratch resistance, matching compatibility, and long-term stability through equipment upgrades, process innovation, and material innovation. Its products have formed three major technical advantages: film hardness reaching 6H, stable radiation rate in composite processing, and a lifespan of 15 years, with cumulative service for over 200 key projects. In the future, Jiaxin will continue to deepen technical cooperation with international enterprises such as German Leibinger and American PPG, promoting the transformation of China's deep glass processing industry towards high-end and intelligent development.
For more information, please visit our official website: www.jiaxinglass.com