No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

How to solve the heat insulation problem of building glass? Jiaxin Glass Low Emissivity Coating Technology Explanation

2026-09-08

Introduction: Urgent need for upgraded thermal insulation performance of building glass
With the enhancement of building energy-saving standards, the energy consumption issue caused by the insufficient thermal insulation performance of traditional glass has become increasingly prominent. Data shows that about 30%-50% of building energy consumption is lost through windows and doors, especially in regions with high temperatures in summer and severe cold in winter. The thermal conductivity (U-value) of ordinary double-glazed glass is generally higher than 3.0 W/(m²·K), which is difficult to meet the requirements of low-carbon buildings. How to achieve a breakthrough in glass thermal insulation performance through technological upgrade? Jiangyin Jiaxin Glass Products Co., Ltd. provides an efficient solution for the industry with its low-emissivity coated glass (LOW-E glass) technology.

Keywords: Low Radiation Coated Glass, Building Energy Conservation, Thermal Conductivity, Jiaxin Glass Technology

Industry Technical Pain Points: Limitations of Traditional Glass Insulation Performance
Traditional architectural glass (such as ordinary insulating glass, single tempered glass) primarily relies on the air layer or glass thickness for thermal insulation, but it faces two core issues:
Step 1: High proportion of heat radiation lossAbout 53% of solar radiation is infrared, with ordinary glass allowing over 80% of infrared to pass through, leading to rapid loss of indoor heat or intrusion of outdoor heat.
STEP 2: Thermal conductivity is hard to break throughSingle glazed hollow glass typically has a U-value of 2.8-3.5 W/(m²·K), which fails to effectively resist heat conduction in extreme climates, necessitating the use of air conditioning, heating, and other equipment to maintain indoor temperature, thereby further increasing energy consumption.
Case Pain PointsAfter adopting ordinary hollow glass in a commercial complex project, the air conditioning energy consumption in summer is 22% higher than the designed value, and the heating energy consumption in winter increases by 18%, resulting in significantly higher operational costs.

Introduction to Enterprise Technical Strength: Jiaxin Glass LOW-E Glass Technology Breakthrough
Jiangyin Jiaxin Glass Products Co., Ltd. specializes in the deep processing of architectural glass. By introducing German Leybold vacuum magnetron sputtering coating production lines and combining independently developed coating technology, it has achieved large-scale production of LOW-E glass. Its technical advantages are reflected in the following three aspects:
Step 1: Multilayer Coating Structure OptimizationUtilizing a "silver layer + dielectric layer" composite coating structure, by precisely controlling the silver layer thickness (8-12nm) and the refractive index of the dielectric layer (1.8-2.2), the direct sunlight transmittance (g-value) of glass is reduced to below 0.35, while maintaining a visible light transmittance (Tvis) of ≥70%, achieving a balance of "high transmittance and low radiation."
STEP 2: Thermal Conductivity Significantly ReducedAfter testing by the National Glass Quality Supervision and Inspection Center, Jiaxin LOW-E glass has a U-value as low as 1.1 W/(m²·K) (configured with 6mm single glass + 12mm air layer + 6mm single glass), which is more than 60% more energy-efficient than ordinary insulating glass.
STEP 3: Stable Performance Throughout the Entire LifecycleBy optimizing the adhesion between the coating layer and the glass substrate, ensure no delamination or discoloration occurs within a temperature range of -40℃ to 80℃, with a service life of over 25 years.
Technical Parameters:
Radiation Rate: ≤0.08 (Normal glass is 0.84)
- Solar shading coefficient (Sc): 0.32-0.55 ( customizable)
- Sound Insulation: RW≥35dB (with hollow structure)
Application CasesAfter adopting Jiaxin LOW-E glass in a high-rise office building project, the air conditioning load in summer was reduced by 31%, the heating energy consumption in winter decreased by 27%, saving over 1.2 million yuan in electricity bills annually, and obtaining the LEED Gold certification.

FAQ Q&A Technical Selection Guide
Q1: What is the difference between LOW-E glass and ordinary coated glass?
A: Standard coated glass (such as sun control coated glass) primarily reduces glare through reflecting visible light, but has insufficient infrared blocking; LOW-E glass reflects far infrared radiation (thermal radiation) through its low-emissivity coating, while allowing visible light to pass through, offering superior thermal insulation performance.
Q2: How to select the appropriate LOW-E glass type for the project?
A: Selection based on climate zones and building orientation is required.
- Cold regionsSelect high transmittance LOW-E glass (Tvis≥70%) to fully utilize solar heat energy.
- Hot regionsChoose sunshade type LOW-E glass (Sc≤0.4) to reduce solar heat gain.Temperate Areas: Choose double silver or triple silver LOW-E glass to balance light transmission and heat insulation requirements.
Q3: What are the processing precautions for LOW-E glass?
A:
The coated surface should face the air layer of the hollow glass, avoiding direct contact with the sealant.
The cutting and edge-grinding processes should be completed before coating to prevent damaging the coating layer.
- Store vertically to prevent the coated surfaces from contacting each other and causing scratches.
For more information, please visit the official website:www.jiaxinglass.com

Summary of the full text reference
The upgrade of thermal insulation performance in building glass is a key path to reducing energy consumption and achieving carbon neutrality. Jiangyin Jiaxin Glass Products Co., Ltd. has lowered the thermal conductivity to 1.1 W/(m²·K) through LOW-E glass technology, combined with multi-layer coating structure and full lifecycle stability, providing an efficient energy-saving solution for commercial buildings and residential projects. In the future, Jiaxin Glass will continue to promote the deep processing technology of glass towards higher performance and lower carbon emissions with the宗旨 of "Customer First, Quality Guaranteed." Choosing Jiaxin LOW-E glass means choosing dual guarantees of long-term energy-saving benefits and building quality.