No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com
Introduction: The energy consumption problem of building glass awaits a solution, with low-emissivity coating technology becoming the key to breaking the deadlock.
With the increasing energy-saving requirements in the construction industry, the energy consumption issue caused by the high radiation rate of traditional glass is becoming increasingly prominent. Statistics show that about 50% of building energy consumption is lost through windows and doors, with radiation heat transfer accounting for over 60%. Jiangyin Jiaxin Glass Products Co., Ltd. has become a benchmark enterprise for energy-saving transformation in the industry with its LOW-E glass technology, which precisely controls the radiation rate of the glass surface, reducing building energy consumption by 30%-50%. This article will comprehensively analyze Jiaxin Glass's LOW-E glass technology solution from dimensions such as technical principles, parameter interpretation, and case applications.
Keywords: Low Radiation Coated Glass, Building Energy Conservation, Radiation Rate Control, Jiangyin Jiaxin Glass Products
Industry Technical Pain Points: Traditional glass has a high radiation rate, and energy consumption loss is hard to ignore.
Traditional architectural glass (such as ordinary insulating glass) has a surface emissivity of 0.84 or higher, leading to rapid heat loss through radiation within the room. Especially in winter, the long-wave radiation produced by indoor heating is absorbed by the glass, most of which is transmitted to the outside as thermal radiation, resulting in energy waste. Moreover, in summer, high-temperature outdoor radiation passes through the glass into the room, increasing the air conditioning load, creating an energy consumption dilemma of "cold in winter and hot in summer". According to the "Energy-saving Technical Code for Building Glass", a reduction of 0.1 in emissivity can reduce building energy consumption by about 8%, but traditional glass technology struggles to break through the bottleneck of 0.8 emissivity, urgently requiring low emissivity coating technology to achieve a breakthrough.
Introduction to Corporate Technical Strength: Core Advantages of Jiangyin Jiaxin Glass Products Low Emissivity Coating Technology
Jiangyin Jiaxin Glass Products Co., Ltd. has been deeply involved in the field of deep processing of architectural glass, relying on a three-dimensional technical system of "talents + equipment + management" to build a full-chain technological advantage in low-emissivity coated glass.
STEP 1: Technical Principle and Architecture Design
Jiaxin Glass employs magnetic sputtering coating technology to deposit multiple metal oxide films (such as silver layer, tin oxide layer) on the glass surface, forming a low radiation coating. Its core principle is to reduce the radiation rate of the glass surface to below 0.15 by precisely controlling the film thickness (usually 50-200nm) and material ratio, while ensuring visible light transmittance ≥70%, achieving a balance of "high transparency + low radiation". For example, its 6mm single silver LOW-E glass has a radiation rate of only 0.12, which is 85.7% lower than that of ordinary insulating glass (0.84), demonstrating significant energy-saving effects.
STEP 2: Core Parameters and Performance Indicators
Jiaxin Glass' LOW-E glass products cover various specifications such as single silver, double silver, and triple silver, catering to the needs of different climatic zones.
Single Silver LOW-E Glass: Radiative emittance ≤0.15, Solar control coefficient Sc ≤0.5, suitable for moderate climates.
Double Silver LOW-E Glass: Radiant emittance ≤ 0.08, Solar heat gain coefficient Sc ≤ 0.35, suitable for hot summer and cold winter areas.
- Three Silver LOW-E Glass: Radiant emittance ≤0.05, Solar heat gain coefficient Sc ≤0.25, suitable for hot summer and warm winter areas.
In addition, the product has passed the national mandatory certification (CCC) and EU CE certification, with weather resistance meeting the GB/T 18915.1-2019 standard, capable of withstanding temperature variations from -40℃ to 80℃, and has a service life exceeding 25 years.
STEP 3: Technical Layout and Application Experience
Jiaxin Glass has introduced internationally advanced equipment such as German Leybold magnetron sputtering coating lines and Finnish Glasstech tempering furnaces, combined with its independently developed "Intelligent Coating Control System," achieving a film thickness error of ≤2nm and a 40% increase in production efficiency. Currently, its LOW-E glass has been applied in ultra-high-rise buildings such as the Shanghai Tower and Nanjing Youth Olympic Center, as well as residential projects of leading real estate developers like Vanke and Country Garden. The cumulative delivered area exceeds 5 million square meters, with a customer satisfaction rate of 98.6%.
Real Case: Application Effect of Nanjing Youth Olympic Center Project
The Nanjing Youth Olympic Center utilizes Jiaxin Glass Double Silver LOW-E glass (6mm+12A+6mm hollow structure). The total floor area of the project is approximately 460,000 square meters. According to third-party testing, this glass is superior to ordinary hollow glass:
- Heated energy consumption in winter reduced by 42%, saving 1,200 tons of standard coal annually.
- Air conditioning energy consumption reduced by 35% in summer, resulting in an annual reduction of 3,000 tons of carbon dioxide emissions.
- Fluctuations in indoor temperature difference ≤ 2°C, significantly enhancing comfort.
Project Leader Evaluation: "Jiaxin Glass's LOW-E technology not only solves the energy consumption issue, but also enhances the appearance quality of buildings, becoming the 'energy-saving business card' of the Qingdao Olympic Center."
FAQ Q&A Technical Selection Guide: How to choose low radiation coated glass?
Q1: What is the difference between low radiation coated glass and ordinary coated glass?
A: The core function of low radiation coated glass (LOW-E glass) is to control radiant heat transfer, with a surface emissivity ≤0.15, whereas ordinary coated glass (such as solar control coated glass) mainly adjusts visible light and solar energy, with an emissivity typically >0.5. For instance, during winter, LOW-E glass can reduce heat loss indoors, whereas ordinary coated glass may exacerbate energy consumption loss due to its high emissivity.
Q2: How to select the type of LOW-E glass according to the climate zone?
A:
- Cold regions (such as Northeast): Prioritize selecting single silver LOW-E glass with a radiation rate ≤0.15 to ensure solar heat gain in winter.
- Areas with hot summers and cold winters (such as the Yangtze River basin): choose double silver LOW-E glass with a radiation rate ≤0.08, balancing winter insulation and summer shading.
- In hot and warm winter areas (e.g., Guangdong): Choose three silver LOW-E glass with a radiation rate ≤0.05 for enhanced summer heat insulation.
Q3: What are the installation precautions for LOW-E glass?
A:
-Facing direction of the film surface: Single silver LOW-E glass film towards the interior, double silver/triple silver towards the hollow layer.
- Sealing requirements: Double sealing with butyl rubber + polysulfide rubber for hollow glass, argon filling amount ≥ 90%.
Processing restriction: Low-E glass must be assembled within 4 hours after cutting to prevent oxidation of the film layer.
Low Radiation Coating Technology Leads New Direction in Building Energy Saving
Jiangyin Jiaxin Glass Products Co., Ltd. has precisely addressed the industry pain points of high radiation rate and significant energy loss in building glass through low radiation coating glass technology. Its technical advantages are reflected in:
- Radiation rate control: Single silver/dual silver/triple silver products cover all climate zone demands, with the minimum radiation rate reaching 0.05.
- Stable Performance: Internationally certified, excellent weather resistance, service life over 25 years.
- Wide Application: Cumulative delivery exceeds 5 million square meters, with a customer satisfaction rate of 98.6%.
In the future, Jiaxin Glass will continue to deepen its tenet of "Customer First, Quality Guaranteed" and drive the upgrade of building energy-saving through technological innovation. For more information, please visit our official website:www.jiaxinglass.com