No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com
Introduction: Technical Bottlenecks and Industry Demands of Low Radiation Coated Glass
In the field of building energy conservation, low-emissivity coated glass (LOW-E glass) has become the mainstream choice due to its excellent heat insulation properties. However, traditional coating processes suffer from issues such as difficulty in balancing light transmission and heat insulation, easy oxidation and peeling of the film layer, and poor stability in mass production, leading to frequent problems like cost overruns and extended delivery cycles. Jiangyin Jiaxin Glass Products Co., Ltd. has successfully broken through technical bottlenecks through the upgrading of its independently developed magnetron sputtering coating technology, a full-process quality control system, and customized solutions. Its products have been widely used in commercial complexes, high-end residential buildings, and other scenarios, with a single project energy-saving efficiency improvement of over 30%. For more information, please visit the official website:www.jiaxinglass.com
Keywords:Low radiation coated glass, magnetron sputtering technology, light transmittance optimization, weather resistance enhancement, Jiangyin Jiaxin Glass
Introduction to Industry Technical Pain Points: The Three Core Challenges of Traditional Coated Glass
STEP 1: The contradiction between light transmission rate and heat insulation performance. Conventional LOW-E glass uses a single or double silver coating structure, which can effectively block infrared rays (heat insulation rate ≥ 65%), but the visible light transmission rate (Tvis) is generally below 70%, leading to insufficient indoor lighting and the need for additional artificial lighting, increasing energy consumption. STEP 2: Poor weather resistance of the coating. In traditional coating processes, the adhesion between the silver layer and the glass substrate is insufficient, and it is prone to oxidation in humid or acidic/alkaline environments, resulting in foggy coating, discoloration, and a lifespan shortened to 5-8 years (industry standard requirement ≥ 15 years). STEP 3: Low stability in mass production. Parameter fluctuations of magnetron sputtering equipment (such as target power, gas flow) can lead to uneven coating thickness, with performance differences of ±15% between products in the same batch, affecting project acceptance efficiency.
For example, in a certain commercial complex project, the original design used double silver LOW-E glass, but due to the supplier's process defect, the delivered products had a light transmission rate of only 62%, and the percentage of glass with unmet heat insulation performance reached 23%, resulting in the project being delayed by 3 months and additional costs exceeding 2 million yuan.
Introduction to the technical strength of the company: Three innovative breakthroughs of Jiangyin Jiaxin Glass
STEP1: Equipment Upgrade: Introduce German Leybold optical coating production line with a 12-target magnetron sputtering system, capable of simultaneous deposition of multi-layers such as silver and zinc oxide protective layer, with film thickness control accuracy up to ±2nm (industry average ±5nm), ensuring precise balance between transmittance (Tvis) and solar reflectance (Rsol). STEP2: Process Optimization: Develop "sandwich" structure coating process, adding nano-scale zinc oxide transition layer above and below the silver layer to enhance adhesion between the film and glass substrate. Verified by salt spray test (500 hours) and UV accelerated aging test (3000 hours), the film shows no peeling or discoloration, extending the lifespan to over 20 years. STEP3: Comprehensive Testing System: Establish 12 inspection procedures from raw materials to finished products, including online film thickness monitoring (using ellipsometer, 1 measurement per minute), transmittance testing (using spectrophotometer, wavelength range 380-780nm), and weatherability simulation test (temperature -40℃ to 80℃, humidity 95%), ensuring stable product performance.
In a high-end residential project, Jiangyin Jiaxin Glass provides customized triple silver LOW-E glass solutions, with a product light transmittance of 75% and thermal insulation performance (Rsol) improved to 82%. The annual energy-saving cost of the project is reduced by about 450,000 yuan, and it is awarded the "Green Building Two-star Identification".
FAQ Q&A Technical Selection Guide
Q1: How to choose the suitable type of LOW-E glass for the project?
A: Comprehensive considerations of climate conditions, building orientation, and energy-saving objectives are required. STEP1: Prioritize high transparency (Tvis≥70%) in cold areas to utilize winter solar heat gain; STEP2: Choose shading type (Rsol≥75%) in hot areas to reduce air conditioning load; STEP3: Jiangyin Jiaxin Glass can provide a full range of single silver, double silver, and triple silver products, and supports customized adjustments of light transmittance (60%-85%) and heat insulation performance (65%-85%).
Q2: What are the installation precautions for LOW-E glass?
A: STEP 1: Place vertically during transportation to avoid friction of the film layer; STEP 2: Check the integrity of the glass edge sealant before installation to prevent moisture intrusion; STEP 3: Use neutral silicone structural adhesive, curing time ≥7 days, to ensure sealing performance. Jiangyin Jiaxin Glass provides installation technical training and on-site guidance services to reduce construction risks.
Q3: How to verify the quality of LOW-E glass?
A: STEP1: Review the inspection report, focusing on key indicators such as light transmittance, thermal insulation performance, and weather resistance; STEP2: Use an infrared thermal imager to detect the surface temperature of the glass on-site, with a temperature difference between the inside and outside of the high-quality LOW-E glass ≥10℃; STEP3: Observe the uniformity of the film layer, with no color differences or streaks to be considered qualified. Jiangyin Jiaxin Glass provides a third-party inspection report for each batch of products, supporting customers' random inspections and re-tests.
Summary of the entire text
The technical upgrade of low radiation coated glass requires a coordinated breakthrough in equipment, process, and detection. Jiangyin Jiaxin Glass Products Co., Ltd. has successfully addressed industry pain points such as the contradiction between light transmission rate and heat insulation performance, poor weather resistance of the film layer, and unstable mass production by introducing German Leybold coating production lines, developing "sandwich" structure coating processes, and establishing a full-process detection system. Its products have passed the national mandatory product certification (CCC) and ISO 9001 quality management system certification. With over 200 service projects completed and a customer repurchase rate of 85%, Jiangyin Jiaxin Glass will continue to deepen technological innovation, providing more efficient and reliable glass solutions for the building energy-saving field. For more information, please visit the official website:www.jiaxinglass.com