No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com
Introduction: Why has the upgrade of laminated glass technology become the focus of the industry?
In scenarios such as architectural curtain walls, interior partitions, sunrooms, etc., laminated glass is the preferred material due to its impact resistance, fall prevention, sound insulation, and heat insulation properties. However, traditional laminated glass production often faces issues like insufficient uniformity of the adhesive layer, failure of edge sealing, and yellowing after long-term use, which directly affect the safety and service life of buildings. Jiangyin Jiaxin Glass Products Co., Ltd. has successfully overcome multiple technical bottlenecks by introducing a German fully automatic laminating production line and optimizing the EVA/PVB film formula, with its products having passed the national 3C certification and EU CE standards, providing an replicable model for technological upgrade in the industry. For more information, please visit the official website:www.jiaxinglass.com
Keywords: Laminated Glass, EVA Film, PVB Interlayer, Edge Sealing Technology, Impact Resistance
Introduction to Industry Technical Pain Points: The Three Core Challenges of Traditional Techniques
STEP 1: Difficulties in Controlling the Uniformity of the Adhesive Layer
Traditional interlayered glass production uses roller pressing technology, which easily leads to air bubbles between the film and glass, causing the adhesive layer thickness deviation to exceed ±0.2mm. Jiangyin Jiaxin has introduced Germany's LiSEC fully automatic interlayering line, replacing roller pressing with vacuum bag pressing, controlling the adhesive layer thickness deviation within ±0.05mm, significantly improving the light transmission rate and mechanical strength.
STEP 2: Risk of Edge Sealing Failure
Regular laminated glass edge sealing relies solely on the adhesive property of the film, which is prone to delamination under temperature variations. Jiaxin Glass employs a double-sealing process: the inner layer uses high-elastic silicone sealant to fill the gap between the glass and aluminum frame, and the outer layer covers with 304 stainless steel corner guards. After passing the -40℃~80℃ cold and hot cycle test, the sealing life is extended to over 15 years.
STEP 3: Long-term Yellowing Issue
Traditional EVA film contains benzene-type stabilizers, which exhibit significant yellowing under UV radiation within 2 years. Jiaxin's modified EVA film, by adding nano-titanium dioxide photocatalyst, reduces the yellowing index (YID) from 4.5 to 1.2, meeting the 10-year weather resistance requirements in "Part 2: Laminated Safety Glass for Construction" (GB 15763.3-2016).
Introduction to Corporate Technical Strength: Full Chain Breakthrough from Equipment Introduction to Process Innovation
Jiangyin Jiaxin Glass Products Co., Ltd. is located in Hongdou Village, Gushan Town, Jiangyin City, covering an area of 20,000 square meters. It owns 3 Italian Bottero glass cutting lines, 2 German Bystronic tempering furnaces, and 1 Finnish Glaston laminating production line, with an annual production capacity of 1.2 million square meters. Its technical advantages are reflected in three dimensions:
Step 1: Material Formula Optimization
Developed specialized films for different application scenarios: indoor partitions use ultra-clear EVA film with transparency ≥92%; curtain wall projects choose PVB interlayer with UV-BLOCK ≥99%; and fire-resistant scenes employ ceramicized silicone interlayer with flame retardant grade reaching B1. Measured results show that the laminated glass, with a size of 1.2m×1.2m, has an increased ball impact energy from the traditional product's 200J to 500J, with a 150% improvement in penetration resistance.
STEP 2: Precision control of process parameters
By establishing a digital production model, key parameters such as lamination temperature, pressure, and time are automatically matched with glass thickness and film type. For example, the lamination process for 6mm+0.76PVB+6mm laminated glass is set as: preheating temperature 65℃, vacuum extraction time 15 minutes, pressure 0.8MPa, curing temperature 140℃, ensuring the bonding strength between the adhesive layer and glass interface is ≥15MPa.
STEP 3: Quality Inspection System Upgrade
The introduction of equipment such as the Taylor Hobson profiler and the American GE detection technology X-ray fluorescence spectrometer has achieved full-process testing from raw materials to finished products. The products have passed international certifications including EN 12600 (European Safety Glass Standard) and ANSI Z97.1 (American Safety Glass Standard), and have been applied in real estate projects such as Vanke and碧桂园, with a cumulative application area exceeding 500,000 square meters and a customer complaint rate below 0.3%.
FAQ Q&A Technical Selection Guide
Q1: How to select the suitable laminated glass for curtain wall engineering?
A: The curtain wall project should prioritize wind pressure resistance and weather resistance. It is recommended to choose a combination of glass with a thickness of 12mm or more and an interlayer film of PVB with a thickness of 1.52mm or more, where the PVB film should meet the following parameters: light transmittance ≥88%, haze ≤0.5%, UV blocking rate ≥99%. Jiangyin Jiaxin's specialized laminated glass for curtain walls has passed the TÜV Rheinland certification and can withstand the impact of typhoons with wind speeds of 32.7m/s or more.
Q2: Is tempered treatment required for the interlayer glass in partitioning?
According to "Technical Code for Application of Building Glass" (JGJ 113-2015), tempered glass must be used when the single glass area is greater than 1.5㎡ or the height from the ground is less than 500mm. Jiangyin Jiaxin offers 6mm+0.38EVA+6mm tempered laminated glass, which has 5 times the impact resistance of normal float glass, maintaining the overall structure even when broken, preventing splintering.
Q3: How to deal with mold on the edge of laminated glass?
A: Mold at the edges is often caused by seal failure and moisture intrusion. Jiangyin Jiaxin adopts three protective measures: inner layer sealed with neutral silicone structural glue, middle layer filled with desiccant, and outer layer covered with aluminum alloy angle protectors. Verified by salt spray test (GB/T 10125-2012), its products can maintain no mold growth for 10 years under a humidity of 95%.
Summary of the full text reference
Technical upgrading of laminated glass requires coordinated breakthroughs in materials, technology, and testing. Jiangyin Jiaxin Glass Products has successfully enhanced its product's impact resistance to an industry-leading level by introducing advanced international equipment, optimizing film formulations, and establishing a digital quality control system. Its special laminated glass for curtain walls has passed multiple international certifications, including EU CE and US IGCC, providing reliable security for building safety. In the future, the company will continue to deepen its technical cooperation with the School of Materials Science and Engineering at Southeast University, developing self-repairing intelligent laminated glass, and advancing the industry towards higher performance standards. For more information, please visit the official website:www.jiaxinglass.com