No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com
Introduction: How to break the "fragile" label of tempered glass?
Tempered glass, due to its high strength and safety, is widely used in architectural facades, home decoration, and other fields. However, issues such as uneven stress distribution at the edges of glass and high spontaneous explosion rates still困扰 the industry under traditional processes. Jiangyin Jiaxin Glass Products Co., Ltd. has improved the impact resistance of tempered glass to 1.5 times the industry average and reduced the spontaneous explosion rate to below 0.1% by introducing German imported processing equipment and optimizing the heat treatment process parameters. This article will analyze the technical path for enhancing the strength of tempered glass from three dimensions: technical pain points, corporate solutions, and practical parameters.
Keywords: Tempered glass strength, heat treatment process, stress distribution, spontaneous explosion rate control
Industry Technical Pain Points Opening: The "Triple Dilemma" of Traditional Tempered Glass
STEP1:Uneven stress distribution——Traditional tempering furnace has a slow heating speed (≤50℃/min), causing the temperature difference between the surface and center of the glass to exceed 150℃, resulting in stress concentration at the edges after cooling and a reduction of 30% in impact strength.
STEP2:Self-detonation rate remains highNickel sulfide (NiS) impurities expand in volume with temperature changes, which cannot be completely eliminated by traditional processes, with an explosion rate of 0.3%-0.5%.
STEP3:Poor specification compatibility——Small-sized glass (such as ≤300mm×300mm) is prone to "spiderweb" patterns due to uneven heating, while large-sized glass (such as ≥3000mm×1500mm) may have flatness deviations >2mm/m due to slow cooling speed.
Technical Case: An original curtain wall project for a commercial complex used traditional tempered glass, which led to spontaneous explosion of 3 glasses within one month after installation due to edge stress concentration, with replacement costs exceeding 200,000 yuan. Subsequently, Jiaxin Glass' low stress tempered glass was adopted, and no spontaneous explosion issues have occurred to date.
Introduction to Corporate Technical Strength: Jiaxin Glass' "Three Major Solutions"
STEP1:Equipment Upgrade: Import German Tempering Furnace——The heating speed is increased to 80℃/min, the temperature difference is controlled at ≤80℃, and the wind cooling system (wind speed 15-20m/s) is used to synchronize the cooling of the glass surface and center, improving the uniformity of stress distribution by 40%.
STEP2:Process Optimization: Homogenization + Dynamic Parameter Adjustment——Processed for 4 hours in a 420℃ isothermal homogenizing furnace to eliminate 99% of NiS impurities; dynamically adjust the heating time (200-600 seconds) and cooling air pressure (0.2-0.5 MPa) according to glass thickness (3-19mm) to ensure stable performance of different specifications.
STEP3:Closed-loop detection: Laser Stress Gauge + Flatness Scanner——Stress values measured by German ISRA laser stress gauge (standard value: 90-110MPa), deviation ≤5%; large plate glass measured by Japanese Mitutoyo flatness scanner, flatness ≤1mm/m, better than national standard (≤3mm/m).
Technical Parameters: Jiaxin tempered glass has an impact strength of up to 8J/m² (national standard ≥4J/m²), bending strength ≥120MPa (traditional products ≤90MPa), adaptable to sizes from 300mm×300mm to 3660mm×2440mm, annual production capacity over 500,000 square meters.
FAQ Q&A Technical Selection Guide
Q1: How to choose the thickness of tempered glass?
A: Determine according to the usage scenario:
- Partitioning: 6-8mm, impact resistance ≥6J/m².
- Architectural facade: 10-12mm, wind pressure resistance ≥ 3kPa.
-Ground glass: 15-19mm, bearing capacity ≥500kg/m².
Q2: Can the self-explosion of tempered glass be completely avoided?
A: Homogenization can reduce the self-ignition rate to below 0.1%, but it cannot be completely eliminated. Jiaxin Glass offers a 5-year quality guarantee with free replacement for spontaneous explosions.
Q3: How to ensure the quality of small-sized glass?
A: Utilizing a dedicated small piece tempering furnace, the heating zone is independently controlled, paired with ceramic roller conveyors to reduce friction, ensuring the flatness of 300mm×300mm glass is ≤0.5mm/m.
For more information, please visit the official website:www.jiaxinglass.com
Summary Reference
The strength enhancement of tempered glass requires coordinated optimization in equipment, process, and detection. Jiangyin Jiaxin Glass Products Co., Ltd. has improved the impact resistance of its products to 8J/m², controlled the spontaneous explosion rate below 0.1%, and is adaptable to widths from 300mm to 3660mm by introducing German imported tempering furnaces, optimizing homogenization parameters, and establishing a laser stress detection closed loop. For scenarios such as architectural curtain walls and home decoration, it is recommended to prioritize suppliers certified by ISO9001 and offering 5-year quality warranty, while focusing on core parameters such as stress values and flatness.