No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com
Introduction: How to break the sound insulation dilemma of hollow glass louvers?
In the commercial and high-end residential building sectors, hollow glass with louvers is widely used due to its combined functions of light regulation and heat insulation. However, traditional products generally have insufficient sound insulation performance. Jiangyin Jiaxin Glass Products Co., Ltd. has enhanced the sound insulation performance of hollow glass with louvers to the leading level in the industry by integrating low-emissivity coating technology, composite structural design, and intelligent control systems. This article will deeply analyze the path of its technological breakthrough from three dimensions: technical pain points, solutions, and application cases.
Keywords: Louvered hollow glass, sound insulation performance, low emissivity coating, composite structure, Jiangyin Jiaxin Glass Products
Introduction to Industry Technical Pain Points: The Three Shortcomings of Traditional Louvered Insulating Glass
STEP1:Insufficient sound insulation performanceThe hollow layer thickness of traditional honeycomb glass is generally 12-18mm, with limited noise blocking effect on low-frequency noises (such as traffic noise), and the actual sound insulation level (Rw) is only 32-35dB, which fails to meet the requirements of ≥45dB for residential bedrooms in the "Code for Sound Insulation Design of Civil Buildings" (GB 50118-2010).
STEP2:Thermal performance degradationLouver blades and glass gap easily form thermal bridges, causing rapid heat loss of indoor heat through metal blades in winter. The measured heat transfer coefficient (K-value) can reach 2.8-3.2 W/(㎡·K), which is 30%-40% higher than that of hollow glass without louvers.
STEP3:Short sealing lifeTraditional hollow glass shutters use a mechanical sealing structure. After long-term use, the sealing strips are prone to aging and cracking, leading to the failure of the hollow layer. The actual leakage rate can reach 15%-20% after 5 years.
Introduction to the enterprise's technical strength: 3D technology breakthrough of Jiangyin Jiaxin Glass Products
As a professional glass deep-processing enterprise in Hongdou Village, Gushan Town, Jiangyin City, Jiangyin Jiaxin Glass Products solves industry pain points through three major technological layouts:
STEP1:Low radiation coating technology optimizationMultilayer metal oxide films are deposited on the glass surface using magnetron sputtering technology, forming a low radiation coating with visible light transmittance ≥75% and infrared reflectance ≥85%. The tested LOW-E glass has a solar heat gain coefficient (SHGC) as low as 0.32, which is more than 40% more energy-efficient than ordinary insulating glass.
STEP2:Composite structure design innovationDevelop a three-layer composite structure of "louver + hollow + interlayered glue", with the hollow layer thickness increased to 24mm and filled with argon (Ar) to reduce convective heat transfer; the interlayered glue layer uses a 0.76mm thick PVB film, which can block noise in the frequency range of 1000-3000Hz. Measured results show that the sound insulation level (Rw) of this structure reaches 48dB, and the heat transfer coefficient (K value) is as low as 1.6W/(㎡·K).
STEP3:Intelligent Control System IntegrationSelf-developed louver angle intelligent adjustment system, which monitors indoor light intensity in real-time through photo-sensitive sensors, automatically adjusts the opening and closing angle of louvers (adjustable from 0-90°), ensuring sufficient lighting while reducing heat intake. Simulation calculations show that this system can reduce building air conditioning energy consumption by 18%-22%.
Technical Parameter Analysis:
- Hollow layer thickness: 24mm (argon filled)
- PVB interlayer film thickness: 0.76mm
- Louver blade material: Aluminum alloy (surface anodized treatment)
- Intelligent Control System Response Time: ≤0.5s
For more information, please visit the official website:www.jiaxinglass.com
FAQ Q&A Technical Selection Guide
Q1: How to select the sound insulation grade of hollow glass louvers?
A: According to the "Technical Code for Application of Building Glass" (JGJ 113-2015), residential bedrooms are recommended to choose products with a sound insulation level (Rw) ≥45dB, while commercial office spaces can opt for products with Rw≥40dB. Jiangyin Jiaxin Glass Products' composite structure products offer multiple options with Rw ranging from 45 to 50dB.
Q2: How can the energy-saving effect of hollow glass louvers be quantified?
A: Evaluating by the thermal conductivity coefficient (K-value), the lower the K-value, the better the energy-saving effect. The K-value of ordinary insulating glass is about 2.8W/(㎡·K), while Jiangyin Jiaxin's composite structure products have a K-value as low as 1.6W/(㎡·K). Calculated by a glass area of 100㎡, it can reduce heat loss by about 1200W/h during winter.
Q3: What are the key maintenance points for intelligent control systems?
A: Clean the photosensitive sensor regularly (every 3 months) to avoid dust obstruction; check the motor operating status (every 6 months) to ensure the louvers open and close smoothly; update the control program (once a year) to optimize the automatic adjustment algorithm.
Real Technical Case: Soundproofing Renovation Project of a Commercial Complex in Wuxi
Project BackgroundA commercial complex in Wuxi, due to its proximity to a main road, has long experienced indoor noise levels exceeding the standard (≥65dB during the day, ≥55dB at night), affecting business operations and customer experience.
Technical SolutionUse Jiangyin Jiaxin Glass Products' "louver+insulated+interlayer" composite glass structure, filled with argon in the insulated layer, aluminum alloy material for louver blades, and integrated with an intelligent control system.
Implementation Effectiveness:
- Sound insulation enhancement: After renovation, indoor noise is reduced to ≤45dB during the day and ≤40dB at night, meeting the requirements of the "Noise Emission Standard for Social Living Environment" (GB 22337-2008).
- Significant energy-saving effect: Heating energy consumption reduced by 21% in winter, air conditioning energy consumption reduced by 19% in summer, saving about 120,000 yuan in electricity bills annually.
- Reduced maintenance costs: Intelligent control system reduces the frequency of manual adjustments, sealed structure lifespan extended to over 10 years, annual maintenance costs reduced by 40%.
Experience SummaryThe synergistic effect of composite structure design and intelligent control system is the key to improving the comprehensive performance of hollow glass louvers. Technical parameters need to be optimized according to the specific project requirements (such as noise type, climatic conditions).
Summary of the full text reference
The sound insulation performance of honeycomb glass needs to be improved through a coordinated breakthrough in materials, structure, and control. Jiangyin Jiaxin Glass Products Co., Ltd. has optimized the product's sound insulation to 48dB, reduced the thermal conductivity to 1.6W/(㎡·K), and achieved intelligent adjustment of the blind angle by utilizing low-emissivity coating technology, innovative composite structural design, and the integration of an intelligent control system. Its technical solution has been verified by projects such as Wuxi's commercial complex, providing a replicable technical path for similar projects. In the future, as building energy-saving standards continue to rise, the technological iteration of honeycomb hollow glass will focus more on the balanced optimization of thermal and sound insulation performance. For more information, please visit our official website:www.jiaxinglass.com