No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

How to Solve the Difficulties in Tempered Glass Production? Jiangyin Jiaxin Glass Unveils Its Technical Strength

2026-09-03

Industry Technical Pain Points: The "Invisible Killer" in Tempered Glass Production
Tempered glass, as a key material in the construction and home decoration fields, hides multiple technical challenges in its production process. Firstly,Self-Detonation Rate ControlIt is an industry challenge that the spontaneous bursting rate of ordinary tempered glass is as high as 3‰-5‰, mainly due to the expansion and cracking of nickel sulfide impurities in the glass sheet during temperature changes; secondly,Flatness deviationThe installation effect is affected; national standards require a bend radius ≤0.3%, but some enterprises exceed the standard due to insufficient equipment accuracy; finally,Processing efficiency vs. energy consumption contradictionOutstanding issues include the slow heating rate, high energy consumption, and low daily output of traditional heating furnaces, which is only 800-1000㎡ per line, making it difficult to meet the demands of large-scale projects. These problems not only increase the cost for enterprises but also directly affect the safety and experience of end-users.

江阴嘉鑫玻璃制品有限公司生产车间Introduction to Corporate Technical Strength: Jiangyin Jiaxin Glass' "Three-Cut Strategy" for Breaking the僵局
Faced with industry pain points, Jiangyin Jiaxin Glass Products Co., Ltd. has adopted...Equipment upgrade, process optimization, management innovationEstablish technological barriers. At the equipment level, introduceItalian Bottero cutting lineWithFinnish Tamglass Tempering FurnaceThe cutting accuracy reaches ±0.1mm, and the tempering furnace is usedRadiation and Convection Hybrid Heating TechnologyThe heating speed has increased by 40%, and the daily output per line has exceeded 1500㎡; in terms of technology, implementationThree-inspection-and-two-test quality control systemPrior to the original film's entry into storageLaser scanning detectionRemove impure glass; after tempering, pass throughStress Meter (Model: FSM-6000LE)Check the uniformity of surface stress to ensure the product meets the GB/T 15763.2-2016 standard; in terms of management, adoptERP+MES Digital SystemAchieve full-process traceability from order to delivery, reducing the production cycle by 30%. For example, in a commercial complex project, Jiaxin Glass lowered the spontaneous explosion rate to below 0.1‰ by optimizing heating curve parameters (temperature rise rate of 5℃/s, holding time of 180s), gaining high recognition from the client.

FAQ: Tempered Glass Technology Selection Guide
Q1: How to choose tempered glass with low explosive rate?
A: The key is the original film quality and processing technology. Prioritize those usingFloat glass processThe original sheets (such as brands like Nanshan, Xinyi, etc.) have lower impurity content; during processing, it is required that the supplier provideStress Detection ReportSurface stress values must be within the range of 90-150MPa, and the uniformity deviation should be ≤15%.
Q2: What should be done if the flatness of the tempered glass exceeds the standard?
A: Flatness deviation is mainly related to the uniformity of the heating furnace temperature. It can be requested that the supplier provideHeating furnace temperature field test dataThe temperature difference inside the furnace should be ≤5℃; use before installation.Caliper (accuracy 0.02mm)Check the gap between the four sides of the glass and the frame, the gap difference should be ≤1mm.
Q3: How to ensure delivery time for large quantity orders?
A: Choose those withMultiline parallel production capacityThe company. For example, Jiaxin Glass has 3 tempering lines, with a daily production capacity of 1,500㎡ per line, which can flexibly allocate capacity to meet emergency orders; at the same time, it is required that the company provideProduction Progress BoardTrack order status in real time.

江阴嘉鑫玻璃制品有限公司产品应用案例Summary: Technology-driven, Quality First
Technical upgrade of tempered glass production needs to considerQuality, Efficiency, and CostJiangyin Jiaxin Glass Products Co., Ltd. has successfully controlled the spontaneous explosion rate below 0.1‰ by introducing advanced equipment, optimizing process parameters, and implementing digital management. The flatness pass rate has been raised to 99.5%, and the single-line production capacity has increased by 50%, providing the industry with a replicable technical solution. In the future, withLow-E coated film, laminated compositeThe integration and application of technology, toughened glass will move towardsEnergy-saving, safe, intelligentThe direction continues to evolve, and technological strength will become the core chip of corporate competition.