No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

Breakthrough in fire-resistant glass technology: How Jiangyin Jiaxin achieves a leap in fire resistance through innovative processes

2026-08-28

Industry Technical Pain Points: The "Three Difficulties" Dilemma of Fire-resistant Glass
In the field of architectural fire prevention, fire-resistant glass, as a key material, has long been confronted with three major technical challenges: Firstly, the contradiction between fire resistance and light transmission rate - traditional fire-resistant glass, to enhance fire resistance time (usually ≤60 minutes), requires increasing the number of glass layers or adding fire-resistant liquid, which leads to a sudden drop in light transmission rate to below 60%, affecting indoor lighting; secondly, the mismatch of thermal expansion coefficients - the difference in expansion rates of glass and frame materials under high temperatures is significant, prone to structural cracking, leading to the failure of fire prevention; thirdly, high production costs - the multi-layer interlayer process relies on imported equipment, with a single-line investment exceeding ten million yuan, making it difficult for small and medium-sized enterprises to afford. Taking a commercial complex project as an example, due to the use of ordinary fire-resistant glass, it was required to make corrections in the fire inspection due to insufficient light transmission rate, resulting in a delay of 3 months and direct losses exceeding 2 million yuan.

江阴嘉鑫防火玻璃生产线
Introduction to the company's technical strength: Jiangyin Jiaxin's "Three Boards" innovation
Jiangyin Jiaxin Glass Products overcomes industry pain points through three major technological breakthroughs:
Material formula optimizationSelf-developed low radiation fire-resistant glass with 0.5%-1.2% nano-cerium oxide added to the glass substrate, enhancing the fire resistance to 90 minutes (passed GB15763.1-2009 standard testing), while maintaining a light transmittance of over 85%, a 25% improvement over traditional products.
2. Technological InnovationUsing a "one-step" adhesive lamination process, glass and fire-resistant intermediate layer are bonded at once under high temperature and pressure (135℃, 1.2MPa), improving efficiency by 40% compared to traditional step-by-step processes, and the yield rate increases from 82% to 95%.
3. Equipment Upgrade引进 German Leica optical coating equipment, achieving film thickness control accuracy of ±2nm, ensuring stable fire resistance and optical performance. In a data center project, Jiaxin fire-resistant glass only saw a temperature rise of 18℃ on the back side after being exposed to high temperatures for 120 minutes, far exceeding the national standard's limit of 140℃.

FAQ: Fire-resistant Glass Selection Guide
Q1: How to choose the balance point between fire resistance and light transmittance?
A: According to the Code for Fire Prevention in Building Design GB50016-2014, the fire resistance limit of fire-resistant glass on both sides of the evacuation corridor shall be ≥1 hour, at which time it is recommended to choose products with a light transmittance ≥80%; for non-evacuation areas (such as office partitions), products with a light transmittance ≥70% and a fire resistance limit ≥0.5 hours can be selected to reduce costs. Jiangyin Jiaxin's low radiation coated fire-resistant glass can meet the requirements of fire resistance for 1 hour and light transmittance of 85%, suitable for high-end commercial projects.
Q2: What should be noted when matching fire-resistant glass with the frame?
A: Pay close attention to the coefficient of thermal expansion (CTE). The CTE of traditional aluminum alloy frames is 23×10⁻⁶/℃,while the glass CTE is 8×10⁻⁶/℃,which is prone to cracking at high temperatures. Jiaxin uses thermal break aluminum alloy frames (CTE≈12×10⁻⁶/℃), filled with elastic sealant to bridge gaps, capable of withstanding temperature fluctuations from -40℃ to +300℃.
Q3: How to verify the performance of fire-resistant glass?
A: It is necessary to review the third-party inspection report, with a focus on three key indicators: fire resistance integrity (whether cracks or perforations have appeared), fire resistance insulation (whether the back fire surface temperature exceeds the limit), and fire resistance radiation (whether the radiant heat flux is ≤15kW/m²). Jiaxin products have passed the inspection by the National Fire Resistant Building Materials Quality Supervision and Inspection Center, and the report number can be publicly queried.

江阴嘉鑫防火玻璃应用案例
Summary Reference
The technical upgrade of fire-resistant glass needs to balance safety, functionality, and economy. Jiangyin Jiaxin Glass Products has successfully broken through the industry's "three difficult" dilemmas through material innovation, process optimization, and equipment upgrade. Its low-emit coating fire-resistant glass achieves a balance between fire resistance, light transmittance, and cost, and has been applied in over 200 projects such as data centers and commercial complexes. In the future, with the implementation of the new standard GB15763.1-2023, fire-resistant glass will develop towards higher fire resistance grades (≥2 hours) and intelligence (integrated with temperature sensors), and enterprises need to continuously invest in R&D to maintain competitiveness.