No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

Unveiling Laminated Glass Production: How to Break Through the Technical Bottlenecks of Bubbles and Delamination?

2026-08-28

Industry Technical Pain Points: The "Invisible Killer" in Laminated Glass Production
Laminated glass bonds two layers of glass together using PVB/EVA film, with core indicators including:Transmittance ≥ 85%, Peel Strength ≥ 20N/25mm, Weather Resistance -40℃ ~ 80℃However, traditional wet process is prone to bubbles due to excessive moisture content in the film (>0.3%), while the dry process may cause delamination due to insufficient equipment accuracy (such as roller pressure fluctuation >0.5MPa). A large-scale curtain wall project once had to be redone due to bubble issues, resulting in direct losses exceeding 500,000 yuan, exposing a common problem in the industry.Rough process control, aging equipment, lagging detectionThree major pain points.

Introduction to the Company's Technical Strength: Jiangyin Jiaxin's "Three-stage Breakthrough" Plan
Jiangyin Jiaxin Glass Products Co., Ltd. throughEquipment upgrade, process optimization, inspection closed loopThree-stage strategy solves industry difficulties:
STEP 1: Equipment Upgrade——引进Germany LiSEC fully automatic laminating line, equipped with0.01mm precision rolling systemThe moisture content of the film can be accurately controlled below 0.15%, a 40% increase over the industry average.
STEP 2: Process Optimization——Unique "Three Temperature and Three Pressure" process (preheating temperature 60℃/sheeting temperature 130℃/curing temperature 145℃, initial pressure 0.2MPa/medium pressure 0.5MPa/final pressure 0.8MPa), ensuring the product peel strength remains above 25N/25mm.
STEP 3: Loop Detection—— Utilizing the non-destructive X-ray testing instrument from American GE, achieving every piece of glass100% Online InspectionBubble detection rate increased from 85% to 99.7%. Currently, its laminated glass has passedEN12543、GB15763.3Double certification, annual production capacity of 500,000 square meters.

FAQ: Laminated Glass Technology Selection Guide
Q1: How to choose suitable laminated glass for high-rise buildings?
High-rise buildings require special attention.Wind pressure resistance performanceWithUltraviolet (UV) resistant agingSuggest selection.PVB film thickness ≥ 0.76mmOur products have impact resistance five times greater than that of ordinary glass; at the same time, we require suppliers to provide1000-hour Xenon Lamps Aging Test ReportEnsure the film yellowing index Δb ≤ 3.
Q2: How to control the bubble rate in laminated glass production?
A: Bubbles mainly originate from excessive moisture content in the film or uneven roller pressure. Solutions include:1) Pre-treat the film with a low-temperature drying room (temperature 25℃±2℃, humidity ≤30%); 2) Use a constant pressure roller press system driven by a servo motor, with pressure fluctuations controlled within ±0.05MPa; 3) Add a vacuum pre-pressure process (vacuum degree ≤-0.095MPa, duration ≥5 minutes).。
Q3: What should be noted when bonding tempered glass with hollow glass?
A: Ensure laminated glass before compoundingEdge flatness ≤ 0.5mmAvoid air leakage in hollow layers; at the same time, control the composite temperature at40℃~60℃Prevent film softening and resultant structural deformation. It is recommended to use:Butyl rubber + polysulfide rubber double sealCraftsmanship, moisture vapor permeability can be as low as 0.5g/(m²·24h).

Summary of the full text reference
The improvement of laminated glass quality requires fromEquipment precision, process control, detection methodsThree-way collaborative breakthrough. Jiangyin Jiaxin Glass Products has successfully reduced the defect rate of its products from 3% to 0.3% by introducing advanced international equipment, optimizing the "three temperatures and three pressures" process, and establishing a full-process detection system, providing the industry with a replicable path for technological upgrade. In the future, withIntelligent Rolling System, AI Vision InspectionWith the application of new technology, the production of laminated glass will move towards a higher level of automation and intelligence.