No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com
Industry Technical Pain Points: The "Invisible Killer" of Tempered Glass Stress Control
The core performance of tempered glass depends on the uniformity of stress distribution, but traditional production often faces three major challenges: Firstly, when the temperature difference between the surface and the center of the glass exceeds 30℃ during the heating stage, it is prone to local stress concentration, triggering the risk of spontaneous explosion (the average spontaneous explosion rate in the industry is about 0.3%-0.5%); secondly, insufficient control precision of the cooling wind pressure (±5% error) can cause the stress difference between the edge and the center of the glass to reach over 15MPa, affecting the impact resistance; thirdly, temperature field fluctuations caused by equipment aging (±10℃) result in a stress difference rate of over 20% in the same batch of products. A medium-sized glass factory once suffered a direct loss of over 2 million yuan due to uneven stress, which led to the spontaneous explosion of 3000㎡ of curtain wall glass after installation, highlighting the urgency of technological upgrading.
Introduction to Corporate Technical Strength: Jiangyin Jiaxin's "Three-Stage" Stress Control System
Jiangyin Jiaxin Glass Products builds a technological barrier through three dimensions: equipment, process, and detection.
STEP 1: High Precision Heating SystemIntroducing the Italian Bottero convection heating furnace, equipped with zonal temperature control technology (6 independent zones), it maintains a temperature difference between the glass surface and center within ±5℃. This improves accuracy by 60% compared to traditional equipment. For instance, during the production of 6mm Low-E toughened glass, the measured stress uniformity reaches 92%, significantly exceeding the industry average of 75%.
STEP 2: Intelligent Wind Screen Control SystemSelf-developed wind pressure dynamic adjustment algorithm, which can automatically match cooling parameters according to glass thickness (3-19mm) and shape, controlling the stress difference between edge and center within ±5MPa. Taking 12mm laminated toughened glass as an example, it passes the EN12600 standard 3B1 certification in impact resistance tests (impact energy 320J).
STEP 3: Full-process Stress DetectionConfigure German ISRA laser stress tester to achieve 100% online detection for each glass sheet, with real-time data feedback to the production system. After application in a commercial complex project, zero spontaneous explosion occurred after the installation of 20,000㎡ of glass, with customer satisfaction reaching 98%.
FAQ Technical Selection Guide
Q1: How to choose the appropriate thickness of tempered glass for the project?
A: The selection of thickness should consider wind pressure, snow load, and application scenarios. For instance, in an area with wind pressure of 5kPa, 6mm tempered glass can meet basic requirements; for higher safety, it is recommended to use a combination of 10mm+1.52PVB+10mm laminated tempered glass, which improves impact resistance by 3 times and passes the EN12600 standard 4B1 certification (impact energy 640J).
Q2: What are the performance differences between Low-E tempered glass and ordinary tempered glass?
A: Low-E glass controls the transmittance of visible light to 70%-80% through the coating layer, while increasing the reflectivity of infrared rays to over 80%, demonstrating significant energy-saving effects. Taking 12mm hollow Low-E tempered glass as an example, its K-value (heat transfer coefficient) can be as low as 1.8W/(㎡·K), which is 30% more energy-efficient than ordinary hollow glass, suitable for green building certification projects.
Q3: How to prevent tempered glass from spontaneous bursting?
A: The main cause of spontaneous explosion is the phase transition expansion of nickel sulfide impurities (NiS). Jiangyin Jiaxin uses Homogenization Treatment (HST) technology, heating the glass to 290℃ and maintaining the temperature for 2 hours, causing 99% of the NiS particles to undergo phase transition prematurely, reducing the spontaneous explosion rate to below 0.01%. After application in a terminal building project at an airport, 50,000㎡ of glass has been operating for 3 years without any spontaneous explosions.
Summary of the full text reference
The technological upgrade of tempered glass production should focus on stress control. Jiangyin Jiaxin has constructed a full-chain quality assurance system from raw materials to finished products through equipment iteration (such as Bottero heating furnace), process optimization (dynamic wind pressure algorithm), and detection closed-loop (ISRA laser instrument). Its technical solution has been successfully applied to over 200 projects including commercial complexes and transportation hubs, with product pass rate consistently above 99.2%. For projects pursuing high-quality standards, it is recommended to prioritize suppliers with HST processing capabilities and online stress detection to reduce maintenance costs in the later stage.