No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

Unveiling the Fire Glass Production: How Jiangyin Jiaxin Breaks Technological Bottlenecks to Create a Safety Barrier

2026-08-26

Industry Technical Pain Points: The "Triple Challenges" in Fire Glass Production
Fire-resistant glass, as a core material in the field of building safety, faces multiple technical challenges in its production process:Firstly, the challenge of balancing fire resistance and light transmittance.Traditional fire-resistant glass achieves fire resistance by adding chemical flame-retardant agents or physical interlayers, but often results in a light transmission rate dropping below 60%, which is difficult to meet the natural lighting requirements of high-rise buildings.Secondly, the contradiction between production efficiency and cost control.Fire-resistant glass requires high-temperature quenching, chemical strengthening, and multiple processes. The daily production capacity per line is generally less than 500 square meters, and the energy consumption of the equipment accounts for over 30% of the cost.Third, the conflict between quality stability and mass production.Factors such as manual operation errors and batch variations in raw materials can easily cause the flame resistance limit of products to fluctuate by more than 15%, affecting the pass rate of project acceptance. A large commercial complex project had to be redone and all the glass replaced due to the fire-resistant glass not lasting more than 30 minutes, resulting in direct losses exceeding 2 million yuan.

Introduction to Corporate Technical Strength: Jiangyin Jiaxin's "Three-Blade Strategy" for Breaking New Ground
江阴嘉鑫玻璃制品有限公司生产车间
Jiangyin Jiaxin Glass Products Co., Ltd. resolves industry pain points through three major technical layouts:Self-developed "Composite Reinforcement Technology"The glass surface is treated with nano-scale silica sol to enhance penetration strength, increasing the bending strength to 120MPa (the national standard requires ≥90MPa), while maintaining a light transmittance of over 85%. According to the National Fire-resistant Building Materials Quality Supervision and Inspection Center, the fire resistance limit reaches 92 minutes.2. Full automation production line upgrade.Introducing the German LiSEC insulating glass production line and the Finnish Glaston tempering furnace, achieving full automation from cutting, edging to tempering. The daily production capacity of a single line is increased to 1200 square meters, with energy consumption reduced by 22%.3. Intelligent Quality Traceability SystemBy binding the production parameters of each glass panel with RFID chips and combining AI vision detection technology, the product defect rate is controlled within 0.3%. In a landmark building project in Nanjing, Jiaxin's fire-resistant glass passed the fire inspection unconditionally, earning the owner's "zero-defect delivery" evaluation.

FAQ: Fireproof Glass Technical Selection Guide
Q1: How to choose the appropriate fire-resistant glass type for the project?
A: Fire-resistant glass is divided into insulated type (A class) and non-insulated type (C class). A class glass contains an insulating layer, which can block heat transfer and is suitable for crowded places such as shopping malls and theaters; C class glass only blocks flames and is suitable for scenes with high requirements for lighting, such as industrial workshops. Jiangyin Jiaxin's A class fire-resistant glass maintains structural integrity at 1000℃ by adding cesium potassium fire-resistant liquid, while C class glass uses a single cesium potassium tempered process with a light transmittance of 88%.
Q2: How to verify the fire resistance limit of fire-resistant glass?
A: According to GB 15763.1-2009 standard, the fire resistance limit must be verified through vertical combustion tests by authorized national institutions (such as the China Academy of Building Research). During the test, the glass must remain unbroken and without flame spilling for 30/60/90 minutes under a 1000℃ flame. Jiangyin Jiaxin provides a test report for each batch of products, supporting third-party re-inspection.
Q3: What are the precautions for installing fire-resistant glass?
A: Installation requires the use of special fire-resistant sealant and stainless steel frames, with the gap width controlled between 3-5mm, and filled with fire-resistant rock wool. Jiangyin Jiaxin offers a one-stop service of "glass + frame + installation guidance" to ensure the overall fire resistance meets standards. There was a project where the fire resistance time was shortened by 40% due to substandard frame material, which was restored to the design requirements after rectification by the Jiaxin technical team.

Summary: Technology drives security, quality builds trust.
江阴嘉鑫防火玻璃应用案例
The production of fire-resistant glass is not only a breakthrough in material science but also a practice of safety philosophy. Jiangyin Jiaxin Glass Products Co., Ltd. has increased the fire resistance of fire-resistant glass from the industry average of 60 minutes to 92 minutes, and improved the light transmittance from 70% to 88% through the three-dimensional drive of "process innovation + equipment upgrade + intelligent management", providing a more reliable solution for building safety. In the future, Jiaxin will continue to deepen cooperation with scientific research institutions to explore the mass production technology of ultra-thin fire-resistant glass (thickness ≤ 10mm) and promote the industry to develop towards a more efficient and environmentally friendly direction. Choosing Jiaxin is not just choosing a piece of glass, but choosing a commitment to life.