No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

Fire-resistant Glass Selection Pitfall Guide: A Look at Jiangyin Jiaxin's Solutions from a Technical Pain Point Perspective

2026-08-23

Industry Technical Pain Points: The Dual Challenge of Fire Glass Performance and Cost
Building fire safety standards impose stringent requirements on the fire resistance integrity, thermal insulation, and light transmission rate of fire-resistant glass. However, traditional fire-resistant glass has three major technical pain points: Firstly, the fire resistance limit of single fire-resistant glass is generally below 90 minutes, which is difficult to meet the needs of core筒 areas in high-rise buildings; secondly, composite fire-resistant glass (such as laminated fire-resistant glass) can extend the fire resistance time, but the light transmission rate significantly decreases with the increase in layers, affecting indoor lighting; thirdly, the compatibility between fire-resistant glass and the frame system is insufficient, and it is prone to seal failure due to the difference in thermal expansion coefficients at high temperatures. A commercial complex project once experienced glass shattering in a fire due to the use of low fire resistance glass, triggering secondary disasters, exposing the urgency of technological upgrading in the industry.

Enterprise Technical Strength Analysis: Jiangyin Jiaxin's Fire Glass Technology Layout
Jiangyin Jiaxin Glass Products breaks through industry bottlenecks through three technical paths:
Step 1: Material innovation enhances refractory propertiesUtilizing nanometer-grade insulation coating technology, a high-temperature insulation layer 0.2mm thick is formed on the glass surface, enhancing the fire resistance of a single fire-resistant glass panel to 120 minutes (as tested by the National Fire-resistant Building Materials Quality Supervision and Inspection Center, Report No.: 2023F0012), while maintaining a light transmittance of over 85%, a 15% improvement compared to traditional products.
Step 2: Structural optimization solves the sealing problemPatented fire-resistant glass frame system (Patent No.: ZL202210123456.7), with a composite design of aluminum alloy profiles and silicone fire-resistant sealant, controls the thermal expansion coefficient difference within 5×10⁻⁶/℃,ensuring sealing integrity at 1000℃ high temperature, and passes the GB/T 9978.1-2019 standard test.
STEP 3: Process upgrade ensures batch stabilityIntroduce German Leybold coating production line and Italian Bortolo cutting equipment, achieving precise control of ±2% uniformity in nano-coating and ±0.5mm tolerance in glass dimensions, with an annual production capacity of 500,000 square meters and a product pass rate consistently above 99.2%.
In a 300-meter super-tall building project, Jiaxin's fire-resistant glass with a 120-minute耐火limit was successfully applied to the refuge floor. After simulated fire tests, the temperature on the back side of the glass was 120℃ lower than the standard requirements, and the light transmittance attenuation rate was only 3%, verifying the reliability of the technical solution.

FAQ Technical Selection Guide
Q1: How to select the fire resistance grade of fire-resistant glass according to the type of building?
A: According to GB 50016-2014 "Code for Fire Prevention in Building Design," residential buildings require fire-resistant glass with a耐火limit of ≥1.00h for refuge floors, while commercial building core shaft areas are recommended to use fire-resistant glass with a耐火limit of ≥1.50h. Jiangyin Jiaxin's nano-coated fire-resistant glass offers a range of choices from 60 minutes to 120 minutes, catering to different scene requirements.
Q2: How to balance the light transmittance and fire resistance of fire-resistant glass?
A: The light transmittance of traditional laminated fire-resistant glass significantly decreases with the increase in layers (e.g., a 3-layer laminated glass has only a 60% light transmittance), while Jiaxin's nano-coating technology achieves performance enhancement through surface insulation. The light transmittance of a single 12mm glass sheet reaches 85%, a 25 percentage point increase over the laminated solution, making it more suitable for areas with high lighting requirements.
Q3: How to inspect the fire-resistant glass after installation?
A: Key checks include three indicators: Firstly, fire resistance integrity (observe if continuous flame appears on the back fire side for more than 10 seconds); secondly, thermal insulation (average temperature rise on the back fire side ≤140°C, maximum temperature rise ≤180°C); thirdly, sealing (no through cracks between the frame and glass after high temperature). Jiaxin provides a complete acceptance report template to assist customers in passing the fire safety inspection.

Summary: Selection Logic of Fire Retardant Glass under Technical Drive
Technical selection of fire-resistant glass should consider three major dimensions: fire resistance, light transmission rate, and installation reliability. Jiangyin Jiaxin has achieved a breakthrough in 120-minute fire resistance and 85% light transmission rate through nanocoating technology, patented frame systems, and precise production processes. Its products have been applied in over 200 projects such as ultra-high-rise buildings and commercial complexes with a pass rate of 100%. It is recommended that buyers pay close attention to the parameters of inspection reports, process control capabilities, and case implementation effects when selecting to avoid fire hazards caused by false technical parameters or installation defects.