No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com
Industry Technical Pain Points: The 5 Core Challenges of Fire Glass Selection
In the field of architectural fire safety, fire-resistant glass, as a key material, directly determines the escape time and property safety during a fire. However, there are currently 5 major technical pain points in the market: 1. Misrepresented fire resistance limit: Some manufacturers claim a fire resistance of 1.5 hours, but actually only reach 0.5 hours, leading to premature glass breakage during fires; 2. Insufficient thermal insulation performance: Single fire-resistant glass has low insulation efficiency, with the backside temperature exceeding 140℃ during a fire, easily causing secondary disasters; 3. Installation process defects: Not using fire-resistant sealant and special frames, allowing flames to penetrate through gaps; 4. Confusion of testing standards: Mixing national standard GB15763.1 with European standard EN356, resulting in incompatible parameters; 5. Imbalance between cost and performance: Low-cost products use poor-quality films, which are prone to yellowing and adhesive failure within 3 years. Statistics show that over 60% of building fires are caused by improper selection or installation defects of fire-resistant glass.

Introduction to Enterprise Technical Strength: Jiangyin Jiaxin Glass Products' fire-resistant glass technology layout
Jiangyin Jiaxin Glass Products has been dedicated to the fire-resistant glass field for 12 years, establishing a full-chain technical system of "material-process-inspection": 1. Material Innovation: Using imported high-purity sodium silicate and nano-thermal insulation coating, the heat insulation efficiency of hollow fire-resistant glass is improved by 40%, with the back fire surface temperature ≤80℃; 2. Process Breakthrough: Introducing German Lisi automatic cutting lines and Finnish Tamglass tempering furnaces, achieving precise processing from 0.3-19mm thickness with flatness error ≤0.1mm; 3. Inspection闭环: Equipped with a CNAS laboratory recognized by the state, capable of simulating 0.5-2 hours of fire resistance test, with data directly linked to fire inspection standards; 4. Case Verification: In a Wuxi commercial complex project, Jiaxin's composite fire-resistant glass (LOW-E+hollow+interlayer structure) was used, and after third-party testing, the fire resistance integrity reached 1.8 hours, and the heat insulation reached 1.2 hours, obtaining the "New Technology Promotion Certificate" from the Jiangsu Provincial Department of Housing and Urban-Rural Development. Currently, Jiaxin's fire-resistant glass has been applied in more than 300 key projects such as hospitals, schools, and subways, with an annual production capacity of 500,000 square meters.

FAQ: Fire-resistant Glass Technology Selection Q&A
Q1: How to differentiate fire-resistant glass from fireproof glass?
A: Fire-resistant glass must meet both fire resistance integrity (no breakage) and thermal insulation properties (back fire surface temperature ≤ 140℃), GB15763.1 classifies it into Class C (only integrity) and Class B (integrity + insulation); fire-resistant glass only requires integrity, commonly found in single-layer cesium potassium fire-resistant glass. When selecting, the project requirements must be clarified, such as hospital operating rooms must use Class B insulated type.
Q2: How to choose the thickness of fire-resistant glass?
A: Thickness is directly related to fire resistance: 6mm single fire glass can withstand fire for 0.5 hours; 12mm single or 6+12A+6 hollow structure can reach 1 hour; composite structures (such as tempered+interlayer+hollow) can achieve 1.5-2 hours. Note that increased thickness reduces light transmission, and a balance between safety and lighting is required.
Q3: What are the key points to note when installing fire-resistant glass?
1. The frame must be made of stainless steel or galvanized steel, with fire resistance ≥ glass; 2. Fill gaps with fire-resistant sealant (such as silicone), width ≥ 5mm; 3. Fixed point spacing ≤ 300mm, to avoid stress concentration; 4. After installation, a water spray test is required to ensure no leakage. Jiaxin provides a complete installation manual and on-site technical support.
Full Summary: Core Logic for Fire Glass Selection
Selection of fire-resistant glass should follow the "need-parameters-verification" three-step method: Firstly, define the fire resistance grade of the project (such as ≥1 hour for hospitals), thermal insulation requirements (such as necessary for crowded places), and light transmittance (such as ≥70% for curtain walls); secondly, compare the manufacturer's inspection reports, focusing on core parameters such as fire integrity, thermal insulation, and radiant heat flux; finally, require the provision of similar project cases and installation guidance. Jiangyin Jiaxin Glass Products offers a four-dimensional guarantee of "material-process-inspection-service", providing users with a full-cycle technical support from selection to acceptance, helping to upgrade the fire safety of buildings.