No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

Hollow Glass Louver Technology Upgrade: How Jiangyin Jiaxin Solves the Industry's Five Major Pain Points?

2026-08-15

Industry Technical Pain Points: The Five Technical Bottlenecks of Louvered Insulated Glass

Louvered hollow glass, as a core product in the building energy-saving field, directly affects building energy consumption and user experience. However, the industry currently faces five major technical pain points: Firstly, insufficient sealing leads to air leakage in the hollow layer, with a heat insulation performance attenuation rate of up to 30% per year; secondly, the lifespan of the louver drive system is short, and traditional mechanical structures are prone to jamming, with an average operation frequency of only 50,000 times; thirdly, poor compatibility between glass and louvers, with installation errors in atypical windows exceeding 5mm; fourthly, the heat insulation coating is prone to peeling off, and the adhesion of LOW-E film layers is insufficient; fifthly, low production efficiency, with daily output per line not exceeding 200㎡ and struggling to meet the needs of large-scale projects. These pain points not only increase project costs but also hinder the implementation of green building standards. For example, a commercial complex project experienced a 15% increase in annual energy consumption and maintenance costs exceeding 200,000 yuan due to the failure of the louvered hollow glass sealing.

Introduction to Corporate Technical Strength: Jiangyin Jiaxin's Three Major Technological Breakthroughs

Jiangyin Jiaxin Glass Products Co., Ltd. has systematically solved the aforementioned pain points through technological iteration and innovation. Firstly, upgrading the sealing technology: adopting a double-sealing process with German imported butyl rubber and silicone structural glue, combined with the independently developed "pressure balance valve," the air leakage rate of the hollow layer is reduced to 0.5%/year, with heat insulation performance maintained for more than 10 years. Secondly, optimizing the driving system: introducing NSK bearings from Japan and high-precision gear sets, the lifespan of louvers is enhanced to 200,000 times, with a jamming rate below 0.1%; simultaneously, developing an intelligent electric driving module supporting APP remote control, with a response time of only 0.3 seconds. Thirdly, improving the process compatibility: through CAD/CAM integrated design, achieving millimeter-level precise matching of glass and louvers, with the installation error of abnormal-shaped windows controlled within ±1mm; the LOW-E coating layer is produced by magnetron sputtering technology, with adhesion reaching 5B level (ASTM D3359 standard). Currently, Jiaxin Glass has exceeded a daily production capacity of 500 square meters per line, with products passing the national 3C certification and the EU CE certification, and has been applied in benchmark projects such as the Shanghai Tower and Suzhou Center.

FAQ: Guide to Selection of Louvered Insulated Glass Technology

Q1: How to judge whether the sealed performance of hollow glass louvers meets the standard?
A: The sealing performance needs to be verified by three core indicators: Firstly, helium leak detector test, with a leakage rate of ≤1%/year; secondly, high temperature and humidity test (85℃/85%RH, 168 hours), no condensation on the hollow layer; thirdly, low temperature impact test (-20℃, 24 hours), no cracking of the glass. Jiangyin Jiaxin products pass all three tests, with a leakage rate of only 0.5%/year, far exceeding industry standards.

Q2: How to extend the lifespan of the louver drive system?
A: The lifespan of the drive system depends on the gear material and lubrication process. Jiaxin uses Japanese NSK bearings and PA66+GF30 gears, which improve wear resistance by 3 times; at the same time, it fills with high-temperature grease (-40℃~150℃ applicable), achieving an operational lifespan of 200,000 cycles. Users should avoid frequent and violent operation, and regularly (every 2 years) add grease for maintenance.

Q3: How to prevent the peeling of LOW-E film layer?
A: Low-E coating delamination is mainly due to insufficient substrate cleaning or sputtering process defects. Jiaxin adopts a double process of "plasma cleaning + magnetron sputtering," with a substrate cleanliness of ISO 8 and a film adhesion of 5B level. At the same time, the sputtering pressure is controlled within 0.5Pa to avoid stress concentration of the film. Users should avoid using ammonia-containing cleaning agents to prevent film corrosion.

Summary: Technology-driven, Quality-powered

The technical upgrade of hollow glass louvers should focus on three core aspects: sealing, drive lifespan, and process compatibility. Jiangyin Jiaxin Glass Products Co., Ltd. has systematically addressed industry pain points through material innovation, process optimization, and intelligent transformation. Its products have set industry benchmarks with parameters such as '200,000-cycle lifespan', '0.5%/year gas leakage rate', and 'millimeter-level installation accuracy'. In the future, Jiaxin will continue to deepen its technical layout, promoting the development of hollow glass louvers towards higher efficiency, intelligence, and environmental friendliness, providing reliable technical support for green buildings.