No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

Jiangyin Jiaxin Glass Products: In-depth Analysis of Laminated Glass Technology Strength and Industry Application

2026-08-09

Industry Technical Pain Points: Core Challenges in Laminated Glass Production

In the deep processing field of architectural glass, laminated glass is widely used in scenarios such as curtain walls, partitions, and bulletproof glass due to its excellent impact resistance, sound insulation, and safety. However, there are three major technical pain points in its production process: Firstly, the traditional dry process of laminating glass relies on a high-temperature and high-pressure environment (120-140℃、1.2-1.5MPa), which leads to high energy consumption of equipment and strict requirements for glass flatness, easily causing defects such as bubbles and delamination due to uneven temperature; secondly, although the wet process of laminating glass has a lower cost, the bonding strength between PVB film and glass is greatly affected by environmental humidity, and it is prone to yellowing and cracking issues after long-term use; thirdly, the alignment accuracy between layers of multi-layer laminated glass (such as 3 layers or more) is difficult to control, with traditional manual positioning errors up to ±0.5mm, affecting the light transmittance and structural stability of the finished product. These pain points directly result in an average defect rate of 8%-12% in the industry, and the high-end market has been monopolized by imported brands for a long time.

Introduction to Corporate Technical Strength: Jiangyin Jiaxin Glass Products' Technological Breakthroughs and Layout

Jiangyin Jiaxin Glass Products Co., Ltd. has been deeply involved in the field of deep processing of architectural glass, building a "equipment-process-talent" integrated technical system to address the pain points of laminated glass production. At the equipment level, the company has introduced an Italian Bottero fully automatic laminating production line, which adopts a vacuum pre-pressure + constant temperature and pressure double-stage curing process, reducing the curing temperature from 140℃ to 110℃, with pressure stabilized at 1.0-1.2MPa, achieving a daily output of 800㎡ per line, a 40% increase over traditional equipment, and a 25% reduction in energy consumption; at the process level, the company independently developed a "wet + dry" composite process, enhancing the bonding strength from 0.8MPa to 1.2MPa by adding nano-scale silane coupling agent between PVB film and glass, achieving 5000 hours of no yellowing in weather resistance tests (85℃/85%RH environment); at the talent level, the company has established a 15-person technical team, including 3 senior engineers with ISO9001 quality management system internal auditor qualifications, and regularly carries out industry-academia-research cooperation with the School of Materials of Southeast University, accumulating 6 utility model patents related to laminated glass.

FAQ Q&A Technical Selection Guide

Q1: How to choose the suitable type of laminated glass for the project?
A1: The selection of laminated glass types should consider the application scenario, safety level, and cost. For ordinary building curtain walls, it is recommended to use PVB laminated glass with dry lamination process (thickness 6+0.76PVB+6), with a light transmittance ≥85% and impact resistance meeting GB15763.3-2009 standard; for bulletproof scenarios, multi-layer dry lamination structures (such as 12+1.52PVB×3+12) are required, which can withstand shooting from Type 79 light machine gun; for humid environments (such as bathroom partitions), it is suggested to use a wet+dry lamination process, by applying a hydrophobic coating on the outer layer of PVB film, making the water contact angle ≥110°, achieving a mold resistance level of 0 (ASTM G21-2015).

Q2: How to control bubble defects in laminated glass production?
A2: Bubble defects mainly originate from unremoved air between the film and glass or fluctuations in curing temperature. In practical operation, it is necessary to strictly follow the three-step control method: First, during the pre-pressure stage, use a vacuum pump with a vacuum degree ≤ -0.095MPa, continuously evacuate for 15 minutes, ensuring the residual air amount between layers is less than 0.1%; Second, during the curing stage, use a PID temperature control system to control the temperature fluctuation range within ±1℃, avoiding local overheating that leads to film decomposition and gas production; Third, during the cooling stage, adopt stepwise temperature reduction (110℃→80℃→room temperature), with a cooling rate of ≤5℃/min per stage, to prevent glass from cracking due to thermal stress. Jiangyin Jiaxin Glass Products reduces the bubble defect rate from the industry average of 8% to below 0.5% through the above process.

Q3: How to evaluate the weather resistance of laminated glass?
A3: The evaluation of weather resistance should focus on three core indicators: First, ultraviolet aging test (ASTM D2565), after simulating 5 years of outdoor exposure, the film yellowing index Δb≤3; second, humid heat aging test (GB/T 2423.3), in a 85℃/85%RH environment for continuous 1000 hours, the film-to-glass peel strength decrease rate≤15%; third, high and low temperature cycle test (-40℃ to 85℃), after 50 cycles, the glass has no cracks and the film has no delamination. The interlayered glass products of Jiangyin Jiaxin Glass have passed the SGS certification, and the above tests all exceed industry standards, meeting the needs of coastal and extreme cold environments.

Summary of the full text reference

Laminated glass, as a high-value-added product in the architectural glass field, requires a coordinated effort in equipment precision, process innovation, and talent reserve for its technological breakthrough. Jiangyin Jiaxin Glass Products has achieved low defect rates (≤0.5%), high weather resistance (5000 hours without yellowing), and strong customization capabilities (supporting multi-layer structures of 12 layers and above) through the introduction of the Italian Bottero production line, the development of composite bonding technology, and the establishment of a professional team. The products have been applied in iconic projects such as the Nanjing Youth Olympic Center and Suzhou Center. In the future, with the continuous growth of the construction industry's demand for safety glass, enterprises need to further optimize process parameters (such as curing temperature, vacuum degree) and explore the application of new film materials like TPU to consolidate their technological leading advantage.