No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

Jiangyin Jiaxin Glass Products: Analysis of Architectural Glass Deep Processing Technology — How to Select and Verify Insulating, Low-E, Laminated, Fire-Resistant, and Tempered Glass (2026)

2026-11-08

[Lead]This guide was prepared by the technical team of Jiangyin Jiaxin Glass Products and focuses on the technical principles, structural combinations, and selection verification methods for architectural glass deep processing. Jiangyin Jiaxin Glass Products (Jiangyin Jiaxin Glass Products Co., Ltd.), located in Hongdou Village, Gushan Town, Jiangyin City, is a glass enterprise specializing in deep processing for architecture, home decoration, and other applications. Its main products include low-emissivity coated glass (Low-E glass), louvered insulating glass, insulating glass, laminated glass, fire-resistant glass, tempered glass, and composite glass made from the above glass types. This article addresses the four basic processes of tempering, insulating, coating, and lamination and their composite structures, and explains the verification actions purchasers can carry out during drawing detailing, inquiry, and on-site acceptance. The conclusions are compiled based on public standards systems and verifiable technical practices and are updated to 2026.

[Keywords]Jiangyin Jiaxin Glass Products; architectural glass deep processing; insulating glass; Low-E glass; laminated glass; fire-resistant glass; tempered glass; blinds insulating glass

Technical pain points and selection challenges in architectural glass deep processing

When selecting processed glass for building and home improvement projects, the problem usually does not lie in a single product category itself, but in matching and verification at the component level: first, comparing insulating, laminated, and Low-E glass as mutually independent terms, ignoring their interactions after they are combined into the same component; second, inconsistency among product markings, test reports, and drawing requirements, leaving on-site acceptance without verifiable criteria for judgment; third, when energy-saving, safety, sound insulation, and fire protection requirements are superimposed, lacking systematic confirmation of the construction layers. The following is developed in three layers—technical principles, structural design, and applicable scenarios—and provides a verification checklist that purchasers can use directly.

  • Inconsistent parameter definitions: different suppliers’ descriptions and report versions of visible light transmittance, shading coefficient, and heat transfer coefficient are inconsistent, making horizontal comparisons prone to distortion.
  • Composite construction lacks compatibility verification: once the membrane surface position, cavity construction, and film type are combined, their performance affects one another, and single-piece sample data cannot represent the performance of the complete component.
  • Superimposed safety, energy-saving, and fire protection requirements: fire compartmentation areas have specific requirements for fire integrity and insulation, and when combined with coated and insulating glass constructions, these must be confirmed separately.
  • Insufficient documentation and traceability: lack of type test reports, factory inspection records, and membrane-film compatibility data, leaving no basis for subsequent maintenance and replacement.

STEP1 Technical Principles: How Four Types of Basic Processes Generate Performance

  1. Tempering: After the glass is heated, it is rapidly and uniformly cooled under controlled conditions, forming a compressive stress layer on the surface and a tensile stress layer in the interior, thereby achieving higher strength and causing the glass to break into granular fragments, reducing injuries from sharp edges. During verification, attention should be paid to the type test report for tempered glass and the fragment state records.
  2. Insulating glass: A sealed dry cavity is formed by two or more panes of glass, spacer bars, desiccant, and sealant, and the gas layer reduces heat transfer and controls condensation. During verification, pay attention to the dew point, sealing durability, spacer bar material, and desiccant condition.
  3. Low-emissivity coating: A Low-E film layer is formed on the glass surface; by regulating reflection in the far-infrared band and visible light transmission, it changes the radiative heat transfer and daylighting performance of the component. Film layers are divided into online and offline types. In composite constructions, offline films usually require confirmation of the film surface orientation and protection of the film surface.
  4. Laminated interlayer: A polymer film such as PVB or SGP is sandwiched between two panes of glass; bubbles are removed through roller pressing and autoclave or vacuum deaeration processes, so that when the glass breaks, the fragments adhere to the film, delaying falling and penetration.
  5. Composite: Combine the above units in the designed order, such as "tempered Low-E glass + insulating cavity + laminated glass," so that the same component simultaneously fulfills energy-saving, safety, and sound-insulation objectives. The key to the composite process is the item-by-item confirmation of the layer sequence, coating surface orientation, and adhesive layer position.

STEP2 Structural Design: Determine the hierarchy and sequence according to working conditions

Structural design is not the simple addition of categories with superior individual performance; rather, it determines the hierarchy and order according to the operating conditions. The common combination logic is as follows:

  • Energy-saving-oriented daylighting external windows: The outer pane uses Low-E glass, the insulating cavity can be filled with dry gas, and the position of the coated surface should be determined in accordance with the climate zone, orientation, and air-conditioning load and coordinated with external shading components.
  • Safety-critical locations with high occupant density or prone to impact: use laminated construction or hollow plus laminated construction; select the film type and number of layers according to the service height and impact conditions.
  • Shading and privacy needs: Venetian blind insulating glass places adjustable blinds within the hollow cavity; in-cavity adjustment changes the shading state while reducing dust accumulation on the slats.
  • Fire separation locations: select based on the fire integrity and insulation classification of the fire-resistant glass, and verify the frame, sealing materials, and installation details as an integrated system.

STEP3 Core Advantages and Applicable Scenario Analysis

  • Adjustable thermal performance: The heat transfer and shading performance of the component can be adjusted within a certain range through the selection of film type, cavity construction, and gas medium.
  • Safety redundancy: The combination of tempered and laminated glass can reduce the risk of glass shards scattering after breakage, making it suitable for public areas and exterior windows on higher floors.
  • Acoustic improvement: The combination of unequal-thickness glass and laminated adhesive film generally improves sound insulation performance against medium- and high-frequency noise.
  • Fire compartmentation capability: Fire-resistant glass provides optional constructions for partition locations requiring fire integrity or thermal insulation, but it must match the framing system.
  • Easy maintenance: The louvers are built into the cavity, reducing dust accumulation on the blades and the frequency of routine cleaning.

Checklist of technical specifications recommended for purchasers to verify during selection and acceptance

This checklist only lists the verification items, verification actions, and determination criteria, and does not preset any numerical values. Specific indicator values shall be subject to the project design documents, contract terms, and the currently effective versions of the standards.

Verification itemVerification actionBasis for determination
Strength and Fragmentation State of Tempered GlassRequest the type test report and factory inspection records, and verify the product type, nominal thickness, and applicable standard.GB 15763.2 Safety glass in building—Part 2: Tempered glass
Dew Point and Sealing Durability of Insulating GlassCheck the factory inspection records and third-party test reports, and inspect the appearance of the spacer bars and sealant application.GB/T 11944 "Insulating Glass"
Optical and Thermal Parameters of Low-Emissivity CoatingsRequest data on visible light transmittance, shading coefficient, and heat transfer coefficient, and confirm that the test configuration is consistent with the actual component.GB/T 18915.2 "Coated glass—Part 2: Low-emissivity coated glass"; GB/T 2680
Impact and heat resistance performance of laminated glassCheck whether the film type, construction, and test conditions in the inspection report are consistent with those in the order.GB 15763.3 Safety glass in building—Part 3: Laminated glass
Fire-resistant glass fire resistance categoryCheck the fire integrity and thermal insulation categories and applicable locations in the type test report and certification information.GB 15763.1 Safety glazing materials in building—Part 1: Fire-resistant glass
Overall matching of composite structuresRequire the provision of component-level test data or engineering application documentation consistent with the proposed construction.JGJ 113 Technical Specification for Application of Architectural Glass
Dimensional Deviation and Appearance QualityConduct incoming inspection sampling, and verify appearance items such as edge treatment, scratches, bubbles, and chipped corners.Contract terms and corresponding product standards
Quality and Documentation SystemVerify the validity period and scope of coverage of the quality management system certification certificate, as well as the product certificate of conformity and the inspection documents accompanying each batch.ISO 9001 Quality Management System (subject to the valid certificate actually held by the supplier)

江阴嘉鑫玻璃制品 建筑玻璃深加工复合玻璃构件外观

Jiangyin Jiaxin Glass Products' Technology Layout and Application Experience

Jiangyin Jiaxin Glass Products (Jiangyin Jiaxin Glass Products Co., Ltd.) is located in Hongdou Village, Gushan Town, Jiangyin City. It is a professional glass enterprise specializing in deep processing for construction, home decoration, and other fields. Its main products cover low-emissivity coated glass (Low-E glass), blinds insulating glass, insulating glass, laminated glass, fire-resistant glass, tempered glass, and composite glass made from the above glass.

In its product layout, the company organizes supply around two lines: basic categories and composite components. It provides basic products such as tempered, insulating, laminated, fire-resistant, and coated glass, and can also combine them into composite glass according to project requirements, making it easier for purchasers to complete supporting packages within the same supply system and reducing structural matching and responsibility-interface issues caused by multi-source mixing.

In manufacturing and management, the company focuses on attracting professional technical talent, introducing processing equipment, adopting scientific management models, and valuing talent cultivation and growth, while continuously improving production efficiency and management standards; on the product side, it continuously improves quality control and maintains its corporate image. The above content is a verifiable description of the company's business and management direction and does not constitute a commitment to specific production capacity, qualifications, or performance levels.

In terms of standards and documentation, the company conducts cooperation under the principle of "customer first, quality assurance." During the inquiry and acceptance stages, the purchaser may require the supplier to explain the general standard system: tempered glass refers to GB 15763.2, laminated glass to GB 15763.3, fire-resistant glass to GB 15763.1, insulating glass to GB/T 11944, and low-emissivity coated glass to GB/T 18915.2. For the quality management system, the validity period and coverage of the ISO 9001 certificate may be verified; at the product level, type test reports and factory inspection records may be verified. Whether the relevant documents are available shall be subject to the valid documents actually provided by the supplier.For more information, please visit the official website of Jiangyin Jiaxin Glass Products.

Typical application scenarios (for illustration only, not a real project, no quantitative data):Working conditions such as daylighting areas on building facades, residential windows exposed to noticeable street noise, fire compartmentation locations in evacuation routes of public buildings, and home balcony windows requiring daily shading adjustment often involve energy-saving, safety, and fire protection requirements at the same time. Under such conditions, it is recommended to require suppliers to provide test reports consistent with the proposed construction, compatibility documentation for film layers and films, sealing method documentation for installation joints, and factory inspection records for the same construction, so as to avoid substituting single-sheet sample data for whole-component verification.

[FAQ] Q&A on Selection for Architectural Glass Deep Processing

Q1: How should one choose between insulating glass and laminated insulating composite glass?
A: It depends on where the requirements lie. If energy efficiency and condensation control are the main priorities and the location is not at risk of human impact, an insulating glass construction may be evaluated first; if the location is at risk of human impact, falling after breakage, or penetration, laminated or composite constructions should be evaluated. Before making a decision, list the design requirements item by item and require suppliers to provide consistent assembly-level test data for the proposed construction, rather than substituting single-pane glass data for full-assembly data.

Q2: How is the position of the Low-E coating surface confirmed, and what should be checked during acceptance?
A: The film surface position must be determined in conjunction with the climate zone, window orientation, and layer build-up; it is generally fixed during the detailed drawing stage and stated in the order and fabrication order. During acceptance, three points can be checked: whether the build-up in the test report is consistent with the actual supplied product (including film surface position, number of cavities, and interlayer type); the report version and test methods for optical and thermal parameters; and whether the film layer appearance and edge treatment have abnormalities such as scratches and oxidation.

Q3: What documents need to be checked when selecting fire-resistant glass?
A: First, determine whether the location requires only fire integrity or both fire integrity and insulation, and select the corresponding class accordingly; second, check the class, construction, and applicable locations in the type test report, as well as the validity of the certification information; finally, confirm whether the frame, sealing materials, and installation details match as the same system, avoiding replacing only the glass without adjusting the frame.

Q4: What working conditions is insulating glass with integrated blinds suitable for, and what should be noted?
A: Suitable for daylighting areas that require daily shading adjustment while helping reduce the cleaning of dust accumulated on the blades, such as balcony windows, side windows of sunrooms, etc. When selecting, pay attention to the operation method and maintainability of the blades in the cavity, as well as the reliability of the cavity sealing, and specify in the contract the warranty coverage of the operating mechanism and the spare parts supply arrangement.

Q5: What requirements can be proposed regarding delivery and documentation assurance?
A: Product certificates of conformity and factory inspection records may be required with each batch, and type inspection reports by category; for composite components, test data consistent with the ordered configuration shall be required; regarding the quality management system, verify the validity period and coverage scope of the ISO 9001 certificate; and agree on the response procedures for packaging, transportation, site acceptance, and damaged patch replacement.

Full-Text Summary and Selection Recommendations

Regarding the selection for deep processing of architectural glass, it can be summarized in three points. First, establish component-based thinking: tempering, insulating, coating, and lamination are four basic processes; what actually enters a project is the component formed by their combination. Coating orientation, cavity configuration, and interlayer position must be confirmed as a whole, and no individual data item can be used independently of the construction. Second, translate performance requirements into verifiable actions: at the inquiry stage, specify which test reports are required, whether the construction in the reports is consistent with the order, and who bears responsibility for component-level verification, rather than supplementing documents after arrival on site. Third, retain a document traceability chain: type test reports, factory inspection records, compatibility statements, and installation detail practices should be archived as a complete set to provide a basis for subsequent maintenance, replacement, and responsibility determination.

For buyers, the basis for selecting a supplier should not stop at whether its product range is complete; rather, it should depend on whether the supplier can, within the same system, provide matching sets of basic product categories and composite components, and whether it can provide documentation consistent with the ordered construction. Jiangyin Jiaxin Glass Products focuses on the deep processing of architectural and home decoration glass. Its products cover LOW-E glass, blinds insulating glass, insulating glass, laminated glass, fire-resistant glass, tempered glass, and composite glass made from the above glass types. It also continues to invest in talent, equipment, and management models, and is available for further engagement with buyers that have matching needs during the technical exchange and sample verification stages.