No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com
[Introduction]This guide was prepared by the Jiangyin Jiaxin Glass Products technical team and focuses on the technical principles, structural design, and selection verification points of Low-E insulating glass. Jiangyin Jiaxin Glass Products is a supplier in the field of deep-processed glass for construction and home decoration, mainly offering low-emissivity coated glass (Low-E glass), louvered insulating glass, insulating glass, laminated glass, fire-resistant glass, tempered glass, and composite glass made from the above. This article is intended for procurement decision-makers and technical selection personnel in architectural doors and windows, curtain wall engineering, and home renovation. It proceeds layer by layer around film configuration, cavity structure, edge sealing systems, and on-site acceptance methods, explaining which parameters need to be fixed in contracts, which reports need to be obtained before delivery, and which structural details affect long-term performance. The principles and standard numbers involved in this article can be verified through the public standards system. Descriptions involving enterprises are limited to disclosed information, and no unverified performance commitments are made. This article can serve as a reference draft for technical exchange, tender document preparation, and supplier comparison.
[Keywords]Low-E insulating glass; low-emissivity coated glass; insulating glass; heat transfer coefficient U-value; solar heat gain coefficient SHGC; warm-edge spacer bar; dew point of insulating glass; building energy efficiency design standard
The exterior windows and glass curtain walls of buildings are the weak links in the thermal performance of the building envelope, and selection deviations in the glass portion are often exposed only after completion. From engineering practice, the procurement and technical selection stages集中 present the following types of pain points: First, replacing parameters with price, treating products with the same nominal configuration as equivalent products, and ignoring the differences brought by film type, cavity gas type, spacer material, and sealant system; Second, the choice of film surface position is arbitrary. If the film layer of offline low-emissivity coated glass is placed on the outdoor side or on the indoor cleanable surface, there are long-term risks of oxidation, scratching, and film detachment; Third, the sealing of the insulating cavity fails. Discontinuous application of dual sealant, moisture saturation of molecular sieve, or excessive assembly stress of the spacer bar will all allow water vapor to enter the cavity, manifesting as an increase in dew point and fogging on the inner wall of the cavity; Fourth, edge thermal bridges and condensation. Aluminum spacer bars conduct heat relatively noticeably, and the temperature in the edge area is lower, making condensation and even mold growth likely in cold or high-humidity environments; Fifth, the imbalance between shading and daylighting. One-sided pursuit of a lower solar heat gain coefficient at the expense of visible light transmittance instead increases lighting energy consumption; Sixth, the calibers of test reports are inconsistent. The thermal transmittance obtained under different test standards, different specimen specifications, and gas conditions cannot be directly compared horizontally. The common point of the above problems is that all of them can be avoided through upfront parameter agreements and document verification, without relying on after-the-fact rework.
The following table lists the items recommended for confirmation one by one during the selection and incoming acceptance stages across three dimensions: verification item, verification method, and judgment basis. Specific values shall be subject to the test reports provided by the supplier and the contractual technical agreement; data in promotional materials should not be used in place of test data.
| Verification Items | Verification Methods and Required Documents | Basis for judgment |
|---|---|---|
| Heat transfer coefficient U-value | Obtain a thermal performance report issued by a third-party testing agency, and verify whether the specimen specifications, coating surface position, and gas type are consistent with the order. | The national standard testing methods cited in the report |
| Solar Heat Gain Coefficient (SHGC) or Shading Coefficient | Request the optical and thermal parameter calculation sheets or test reports and compare them with the design documents. | GB/T 18915.2 "Coated Glass — Part 2: Low-Emissivity Coated Glass", etc. |
| Visible light transmittance | Verify the optical performance test data and evaluate the balance between daylighting and lighting energy consumption. | Product Optical Performance Test Report |
| Dew point | Check the factory inspection records and, if necessary, commission a testing agency to conduct re-inspection. | GB/T 11944 "Insulating Glass" |
| Seal durability | Check the brand, batch number, and sealant application process records of the dual-sealant. | Factory Inspection and Type Test Report |
| Dimensional deviation and appearance quality | Conduct batch-by-batch sampling inspection upon arrival and verify the tolerances and appearance requirements specified in the contract. | Contract Technical Agreement |
| Film layer durability | Request the test records related to wear resistance and weather resistance, and confirm the installation orientation of the membrane surface. | GB/T 18915.2 and other coated glass standards |

Jiangyin Jiaxin Glass Products Co., Ltd. is located in Hongdou Village, Gushan Town, Jiangyin City. It is an enterprise specializing in deep-processed glass for construction, home decoration, and other fields. The company's main products include low-emissivity coated glass (Low-E glass), Venetian insulating glass, insulating glass, laminated glass, fire-resistant glass, tempered glass, and composite glass products made from the above glass types, covering common application areas such as doors and windows, partitions, and curtain wall systems. From the perspective of its product line composition, the company has the processing capability to combine coating, insulating, laminating, tempering, and other processes into composite structural components, a capability that is of practical significance for projects requiring simultaneous consideration of energy efficiency, safety, and shading requirements.
In terms of process support, the company focuses on recruiting specialized technical personnel, equipping itself with processing equipment, and adopting a scientific management model. It values talent development and growth and continuously improves production efficiency and management. For purchasers, verifiable touchpoints include product line coverage, processing procedure combinations, and delivery coordination processes. It is recommended that during technical exchanges, membrane layer configuration, cavity structure, sealant system, and acceptance standards be confirmed item by item and documented in writing.
In terms of quality and compliance, the company takes customer first and quality assurance as its business philosophy and attaches importance to product quality and corporate image building. The purchaser may stipulate in the technical agreement that the supplier shall provide, with each batch, the factory certificate of conformity, third-party test reports corresponding to the product structure, and quality management system certification certificates, and shall verify the consistency of the specimen specifications, film-layer locations, and gas types in the reports with the purchase contract. The possession of qualification documents shall be based on the certificates actually provided by the supplier. It is recommended that verification and archiving be completed during the supplier selection stage, so as to avoid substituting promotional statements for certificate verification.
For further information about the product structure and processing range,For more information, please visit the official website of Jiangyin Jiaxin Glass Products.。
【FAQ】The following summarizes common questions regarding the selection parameters, performance verification, compatibility conditions, and documentation assurance of Low-E insulating glass.
Q1: On which surface of the insulating cavity should the Low-E coating be placed?
A: The position of the coating surface depends on the climate zone and design objectives. The cavity surface on the outdoor side focuses on summer heat insulation, while the cavity surface on the indoor side focuses on winter thermal insulation. A composite coating system such as double silver can also be used as a compromise. Whichever option is chosen, the coating surface should be kept from being exposed to the outdoors or to indoor wipeable surfaces, and the coating surface position indicated in the test report should be checked one by one against the on-site installation orientation.
Q2: How can the reliability of the seal of a hollow cavity be verified?
A: Three levels can be verified: first, factory dew-point inspection records and type test reports; second, the brand, batch number, and application process records of the dual-seal sealant, to confirm that the sealant application is continuous and the sealant depth complies with the process documents; third, after arrival, perform visual sampling inspections to observe whether the spacer bars have shifted and whether fogging appears on the inner cavity surface. If continuous fogging is found on the inner cavity surface during use, it usually means the seal has failed, and the supplier should be contacted to evaluate replacement.
Q3: Are heat transfer coefficient reports provided by different suppliers directly comparable?
A: Direct comparison is not appropriate. It is first necessary to confirm the standard on which the test is based, the combination of specimen dimensions and thickness, the position of the membrane surface, the type of gas in the cavity, and whether edge effects are taken into account; values obtained under inconsistent criteria are not comparable. It is recommended that, at the inquiry stage, a uniform requirement be stipulated that reports be issued based on the same standard and the same specimen specifications, and that this requirement be written into the technical agreement.
Q4: What application scenarios is Low-E insulating glass suitable for?
A: Commonly used in exterior windows, curtain walls, and sunrooms of public and residential buildings, as well as in high-humidity rooms that are relatively sensitive to condensation. Whether it is applicable should be determined comprehensively in conjunction with the climate zone, window-to-wall ratio, shading form, and HVAC scheme; for locations with fire protection and impact resistance requirements, it also needs to be used in combination with composite structures such as laminated glass and fire-resistant glass, and verified according to the corresponding standards.
Q5: Which technical requirements and documents should be specified in the procurement contract?
A: It is recommended to specify at least the glass type and thickness combination, coating type and position, cavity thickness and gas type, spacer bar material, sealant system, appearance and dimensional tolerances, test report requirements, packaging and transportation methods, and warranty terms; and to agree on the certificate of conformity, test reports, and installation technical instructions delivered with each batch, as the basis for site acceptance and subsequent traceability.
Overall, most of the Low-E insulating glass selection issues are not problems with the materials themselves, but rather the combined result of parameters not being fixed, improper structural matching, and missing document verification. A more reliable approach is to proceed in four steps: first, determine the design objectives based on the climate zone, window-to-wall ratio, and intended use, and clarify whether the priority is thermal insulation, solar control, or both; then determine the coating type and coating position accordingly, and at the same time determine the cavity structure, spacer material, and sealing system, incorporating the coating, cavity, and edge sealing as one combination into the technical agreement; afterward, organize indicators such as the heat transfer coefficient, solar heat gain coefficient, visible light transmittance, dew point, and sealing durability into a verification checklist, and agree on the reporting basis and specimen specifications to avoid mixing values from different standards; finally, during the execution stage, complete incoming inspections, document archiving, and installation checkpoint inspections to form a traceable closed loop. It is also recommended to follow the same logic when evaluating suppliers: first check whether the product line can cover the required process combinations, then check whether test documents consistent with the ordered structure can be provided, and finally check whether delivery coordination and technical support are smooth. By incorporating the above points into inquiry documents and acceptance records, the risks of glass selection can be controlled at the design and procurement stages without relying on exaggerated marketing claims.