No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

Analysis of Low-E Coated Glass Technology: How Does Jiangyin Jiaxin Achieve High Efficiency and Energy Conservation?

2026-10-27

Introduction: Why has low-emissivity coated glass become the top choice for energy conservation in buildings?
With the global advancement toward carbon neutrality, the issue of building energy consumption has become increasingly prominent. Data shows that building energy consumption accounts for over 30% of total societal energy consumption, with heat loss through doors, windows, and glass accounting for up to 50%. Low-emissivity coated glass (LOW-E glass) has emerged as a key material for energy conservation in modern architecture due to its exceptional thermal insulation properties. This article will analyze how Jiangyin Jiaxin Glass Products achieves high-efficiency energy conservation through technological innovation from three perspectives: technical principles, processing techniques, and application cases.

Keywords: Low-emissivity coated glass, Building energy efficiency, Jiangyin Jiaxin, Processing technology, Application cases

Opening with Industry Technical Pain Points: Energy-saving Bottlenecks of Traditional Glass
The heat transfer coefficient (U-value) of traditional single-layer glass can reach as high as 5.8 W/(m²·K), and even with the use of insulated glass structures, the U-value is still difficult to reduce below 3.0 W/(m²·K). In summer, ordinary glass cannot effectively block infrared radiation, leading to increased indoor temperatures and higher air conditioning energy consumption; in winter, rapid heat loss results in persistently high heating costs. Additionally, traditional coated glass suffers from issues such as easy oxidation of the coating and short service life, making it difficult to meet long-term energy-saving requirements.

STEP 1: Technical Principle Analysis
The core technology of low-emissivity coated glass lies in the metal oxide film (such as silver, tin oxide, etc.) deposited on its surface. This film achieves thermal insulation by reflecting infrared rays (with wavelengths of 780-2500 nm) while allowing visible light (with wavelengths of 380-780 nm) to pass through, ensuring indoor lighting. Jiangyin Jiaxin employs magnetron sputtering technology to form a multi-layer composite film system on the glass surface, with a heat transfer coefficient as low as 1.2 W/(m²·K), achieving over 40% energy savings compared to traditional insulating glass.

STEP 2: Comparison of Performance Parameters
| Parameter Type | Traditional Insulating Glass | Jiangyin Jiaxin LOW-E Glass |
|----------------|--------------|------------------|
| Heat Transfer Coefficient (U-value) | 3.0 W/(m²·K) | 1.2 W/(m²·K) |
| Visible light transmittance | 0.75 | 0.80 |
| Solar Heat Gain Coefficient | 0.65 | 0.40 |
| Lifespan of Film Layer | 5-8 years | Over 25 years |

Introduction to the company's technological strength: Process breakthroughs at Jiangyin Jiaxin
Jiangyin Jiaxin Glass Products Co., Ltd. has been deeply engaged in the field of glass deep processing for 15 years, possessing three internationally advanced magnetron sputtering coating production lines with an annual production capacity of 2 million square meters. Its technological advantages are manifested in three aspects:

STEP 1: Equipment and Process Upgrades
The German Leybold magnetron sputtering equipment is introduced, enabling precise deposition of a nine-layer film system with a uniformity error of ≤3%. An online gas analysis system is employed to monitor the oxygen-to-argon ratio in real time during the coating process, ensuring stable film performance. For example, when producing 6mm+12A+6mm double-silver LOW-E insulating glass, optimizing sputtering power and gas flow reduces the solar heat gain coefficient from 0.45 to 0.40, enhancing energy efficiency by 10%.

STEP 2: Quality Inspection System
Establish a full-process inspection procedure from raw materials to finished products:
- Raw material testing: Use a spectrophotometer to test the visible light transmittance and iron content of glass substrates, with the iron content required to be ≤ 0.015%;
- Coating process inspection: Utilize X-ray fluorescence spectrometer (XRF) for real-time monitoring of film thickness, with an error controlled within ±2nm;
- Finished product testing: Parameters such as the heat transfer coefficient and shading coefficient are tested in accordance with the GB/T 18915.2-2013 standard, achieving a pass rate of 99.8%.

STEP 3: Accumulation of Application Cases
We have provided LOW-E glass solutions for super high-rise buildings such as Wuxi Hang Lung Plaza and Suzhou Center. Taking Wuxi Hang Lung Plaza as an example, after adopting Jiangyin Jiaxin's double-silver LOW-E insulating glass, the air-conditioning energy consumption in summer decreased by 32%, the heating energy consumption in winter decreased by 28%, and the annual electricity cost savings exceeded 2 million yuan.
江阴嘉鑫LOW-E玻璃生产线

FAQ Q&A Technical Selection Guide
Q1: How to choose the appropriate type of LOW-E glass?
A: Selection based on climate zones:
- Cold regions (such as Northeast China): Prioritize high-transmittance LOW-E glass with a visible light transmittance ≥ 0.7 to ensure solar heat gain in winter;
- In hot-summer and cold-winter regions (such as the Yangtze River Delta): Select shading-type LOW-E glass with a solar heat gain coefficient ≤ 0.45 to balance summer heat insulation and winter heat preservation;
- In regions with hot summers and warm winters (such as Guangdong): Double silver LOW-E glass is used, with a heat transfer coefficient ≤ 1.5 W/(m²·K), enhancing thermal insulation performance.

Q2: What are the processing precautions for LOW-E glass?
A: The following parameters must be strictly controlled:
- Cutting precision: Using CNC cutting machine, dimensional error ≤ ±1mm;
- Edge grinding process: Utilizing diamond grinding wheels with a chamfer width of 1-2mm to prevent film layer damage;
- Inflation of hollow layer: Filled with 95% argon to reduce the heat transfer coefficient by 15%;
- Laminating temperature: During the lamination of insulating glass, the ambient temperature should be controlled at 20-25°C to prevent glass deformation.

Q3: How to test the quality of LOW-E glass?
A: You can make a quick judgment through the following methods:江阴嘉鑫LOW-E玻璃应用案例

Reference for Full Text Summary
Low-emissivity coated glass is a core material for energy efficiency in buildings, with technological breakthroughs requiring a balance among film performance, processing precision, and quality inspection. Jiangyin Jiaxin Glass Products has achieved efficient production and application of LOW-E glass by introducing advanced equipment, optimizing process parameters, and establishing a rigorous inspection system. In the future, with the advancement of the dual carbon goals, LOW-E glass will play a greater role in ultra-low-energy buildings, building-integrated photovoltaics, and other fields. For more information, please visit the official website:www.jiaxinglass.com