No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

Analysis of Low-E Coated Glass Technology: How to Maximize Energy Efficiency in Buildings?

2026-10-04

Introduction: The Glass Technology Revolution in Building Energy Efficiency
Driven by the global goal of carbon neutrality, the current situation where building energy consumption accounts for over 30% urgently requires breakthroughs. As the core material of building envelopes, the energy-saving performance of glass directly impacts the energy consumption level of an entire building. Low-emissivity coated glass (LOW-E glass), with its unique coating process, can reduce building energy consumption by more than 40%, making it the preferred material for modern green buildings. This article will systematically analyze the technical principles, application scenarios, and key selection considerations of LOW-E glass, and provide technical references for architects and developers by incorporating engineering practices from Jiangyin Jiaxin Glass Products.

Keywords:Low-emissivity coated glass, building energy efficiency, Jiangyin Jiaxin Glass Products, LOW-E glass, insulating glass composite technology

Opening on industry technical pain points: Energy-saving bottlenecks of traditional glass
Traditional single-pane glass has a high thermal conductivity coefficient of up to 5.8 W/(m²·K), resulting in significant loss of indoor heat in winter and excessive infiltration of outdoor heat in summer. Even when using ordinary insulating glass, its K-value (thermal transmittance) still struggles to surpass the threshold of 2.0 W/(m²·K), failing to meet the requirement of the Technical Standard for Near-Zero Energy Buildings for an envelope K-value of ≤1.0. Additionally, ordinary glass has a transmittance of up to 80% for near-infrared rays (780-2500 nm), leading to a sharp increase in air conditioning loads and further exacerbating energy waste. These issues are particularly prominent in large-scale glass curtain wall projects such as high-rise buildings and commercial complexes, becoming a critical bottleneck for building energy efficiency.

低辐射镀膜玻璃生产线

Introduction to the company's technological strength: Innovation Practice of LOW-E Glass by Jiangyin Jiaxin Glass Products
As a professional glass deep-processing enterprise in Hongdou Village, Gushan Town, Jiangyin City, Jiangyin Jiaxin Glass Products has delved into the field of building energy efficiency for over a decade, establishing a comprehensive technological system covering the full product line of LOW-E glass, insulated glass, and laminated glass. The company has introduced a German Leybold vacuum magnetron sputtering coating production line, capable of achieving a coating process with up to 13 layers and a precision of ±0.5nm in film thickness control, ensuring that the emissivity of LOW-E glass is ≤0.08, significantly outperforming the national standard requirement of ≤0.15. Through the "dynamic thermal reflection coating technology" developed in collaboration with the Department of Building Technology Science at Southeast University, Jiaxin's LOW-E glass can automatically adjust the near-infrared transmittance based on ambient temperature, increasing the transmittance to over 60% in winter to capture free solar heat and reducing it to below 20% in summer to decrease air conditioning load, thereby achieving dynamic optimization of building energy consumption.

In the field of composite glass technology, Jiaxin has broken through the structural limitations of traditional insulating glass and developed a super energy-efficient glass featuring "triple glazing with two cavities + LOW-E coating + argon filling." Its K-value is as low as 0.6 W/(m²·K), and its sound attenuation reaches 35 dB, meeting both the energy-saving and sound insulation requirements of buildings. This technology has been applied to landmark projects such as the Nanjing Jiangbei New Area Civic Center and the Wuxi Taihu International Expo Center. According to actual measurements, buildings using Jiaxin's super energy-efficient glass have reduced annual energy consumption by 52% and operational and maintenance costs by 38% compared to those with ordinary glass. For more information, please visit our official website:www.jiaxinglass.com

LOW-E玻璃应用案例

FAQ Q&A Technical Selection Guide
Q1: What is the energy-saving principle of LOW-E glass?
STEP 1: Technical Principle Analysis
The core of LOW-E glass lies in the low-emissivity coating applied on its surface, which is composed of multiple layers of metal oxides (such as silver, tin oxide, zinc oxide, etc.). By precisely controlling the thickness (typically 5-50 nm) and refractive index of each layer, it achieves high reflectivity (reflectivity > 90%) for far-infrared rays (wavelength > 2.5 μm) and high transmittance (transmittance > 70%) for visible light (380-780 nm). This characteristic enables the far-infrared rays emitted by indoor objects to be reflected back into the room by the coating, reducing heat loss while allowing visible light to enter, thereby achieving an energy-saving effect of "transmitting light without transmitting heat."

STEP2: Practical Parameter Guide
Three key parameters should be considered during selection: emissivity (ε), U-value (the reciprocal of the K-value, with units of W/(m²·K)), and Solar Heat Gain Coefficient (SHGC). A lower ε value indicates better energy-saving performance, with high-quality LOW-E glass having an ε ≤ 0.08. The U-value should be selected based on the climatic zone of the building; for cold regions, a U ≤ 1.5 W/(m²·K) is preferable, while for hot-summer and warm-winter regions, a U ≤ 2.0 W/(m²·K) is recommended. The SHGC should be adjusted according to the building's orientation; for south-facing glass, an SHGC ≥ 0.5 is suitable to capture solar heat, whereas for east- and west-facing glass, an SHGC ≤ 0.3 is advisable to reduce the risk of overheating.

Q2: How to avoid the oxidation issue of the film layer on LOW-E glass?
STEP 1: Analysis of Technical Advantages
Film oxidation is the primary cause of LOW-E glass failure, which Jiaxin Glass addresses through a "three-layer protective system": the first layer is a bottom protective layer (e.g., silicon oxide) with a thickness of 10-20 nm, preventing sodium ion migration from the substrate glass; the second layer is a functional layer (e.g., silver layer) with a thickness of 8-15 nm, serving as the core for low emissivity; the third layer is a top protective layer (e.g., zinc oxide) with a thickness of 20-30 nm, blocking moisture and oxygen penetration. The three layers are deposited in a single pass using magnetron sputtering, achieving an interfacial bonding strength exceeding 50 MPa and ensuring a film lifespan of ≥25 years.

STEP 2: Key Operation Tips
Precautions during construction: The cut edges of the glass must be sealed with neutral sealant to prevent moisture intrusion from the edges; the spacer bars for insulating glass should employ warm edge technology (such as stainless steel + butyl rubber composite spacer bars) to avoid cold bridge effects; during installation, a 3-5mm elastic gap must be reserved between the glass and the frame to prevent membrane cracking caused by thermal expansion and contraction.

Q3: How are LOW-E glass and insulating glass laminated?
STEP 1: Case Disassembly and Analysis
Taking the glass provided by Jiaxin for the Nanjing Jiangbei New Area Citizen Center as an example, which features a "triple-glazed, dual-cavity + LOW-E coating + argon-filled" structure, its composition is as follows: 5mm tempered glass + 12mm cavity (filled with argon) + 0.7mm PVB interlayer + 5mm LOW-E glass + 12mm cavity (filled with argon) + 5mm tempered glass. This structure bonds the three glass panes into a single unit using a PVB interlayer, with the cavities filled with 90% concentration argon (thermal conductivity of 0.0175 W/(m·K), just one-third that of air). Combined with the low-emissivity properties of the LOW-E glass, it achieves an exceptional energy-saving effect with a K-value of 0.6 W/(m²·K).

STEP 2: Description of Detection Indicators
Quality inspection of laminated glass requires attention to three indicators: first, the airtightness of the hollow layer, which is tested using a helium mass spectrometer leak detector with a leak rate ≤ 1×10⁻⁶ Pa·m³/s; second, the argon concentration, which is tested using laser absorption spectroscopy, with a concentration ≥ 85% deemed acceptable; third, the uniformity of the coating layer, which is tested using a spectrophotometer, with a visible light transmittance deviation ≤ 3% and an emissivity deviation ≤ 0.02.

Reference for full text summary
Low-emissivity coated glass (LOW-E glass) achieves a leap from "passive heat insulation" to "active energy conservation" in building envelopes through a unique coating process. Leveraging German-imported equipment, a precise 13-layer coating technology, and a patented dynamic thermal reflection system, Jiangyin Jiaxin Glass Products has elevated the energy-saving performance of LOW-E glass to new heights. Its composite glass products, featuring an exceptional K-value of 0.6 W/(m²·K), provide critical material support for near-zero-energy buildings. In the future, as the "dual carbon" goals advance further, LOW-E glass will play an even greater role in building energy conservation, and Jiaxin Glass's technological innovations and practices undoubtedly set a benchmark for the industry. For more information, please visit the official website:www.jiaxinglass.com