No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com
Introduction: The "Invisible Guardian" of Building Energy Efficiency - Low-Emissivity Coated Glass
As global regulations on building energy consumption become increasingly stringent, low-emissivity coated glass (LOW-E glass) has emerged as the preferred material for modern building curtains walls, doors, and windows due to its exceptional thermal insulation performance. Statistics indicate that buildings using LOW-E glass can reduce air conditioning energy consumption by 30%-50%, primarily because the coating layer reflects infrared rays while maintaining visible light transmittance. This article will analyze the technical principles, production challenges, and selection criteria of LOW-E glass by integrating the technical practices of Jiangyin Jiaxin Glass Products, providing actionable technical references for the industry.
Key words:Low-emissivity coated glass (LOW-E glass), building energy efficiency, Jiangyin Jiaxin Glass Products, coating process, insulating glass laminating technology
Opening on Industry Technical Pain Points: Energy-saving Bottleneck of Traditional Glass
Traditional single-pane glass has poor thermal insulation performance, with a thermal conductivity coefficient (U-value) generally exceeding 5.8 W/(m²·K), leading to rapid indoor heat loss in winter and significant influx of external heat in summer. Even with ordinary insulating glass, the U-value remains difficult to fall below the threshold of 3.0 W/(m²·K), failing to meet the ultra-low energy consumption requirements of green buildings. Additionally, traditional coated glass is prone to issues such as oxidation discoloration and coating delamination, affecting its service life and optical performance. How to achieve the dual goals of "high light transmittance + low emissivity" in glass through technological innovation has become a core challenge urgently needing resolution in the industry.

Introduction to the Company's Technological Strength: Technological Breakthrough in LOW-E Glass by Jiangyin Jiaxin
Jiangyin Jiaxin Glass Products Co., Ltd. has been deeply engaged in the field of glass deep processing for over a decade. Relying on the trinity strategy of "talent + equipment + management," it has developed three major technological advantages in the field of LOW-E glass:
STEP 1: Magnetron Sputtering Coating Technology — Improves film uniformity by 40%
The company has introduced a Leybold magnetron sputtering production line from Germany, achieving a coating thickness deviation of ≤ ±2nm through a multi-target coordinated sputtering process, significantly surpassing the industry average standard of ±5nm. For instance, its 6mm single-silver LOW-E glass boasts a visible light transmittance of 78%, a solar direct transmittance ratio (g-value) of only 0.32, and a U-value as low as 1.6 W/(m²·K), meeting the stringent performance requirements for glass in passive buildings.
STEP 2: Insulating Glass Laminating Process—Sealing Lifespan Extended to 25 Years
To address the issue of easy air leakage in traditional insulating glass, Jiaxin Glass adopts a triple sealing system consisting of "butyl rubber + polysulfide sealant + warm-edge spacers," combined with a fully automatic insulating glass production line, ensuring that the argon filling amount in the insulating layer is ≥90% and the water vapor transmission rate is ≤0.5 g/(m²·d). Tested by the National Glass Quality Supervision and Inspection Center, its produced insulating LOW-E glass demonstrated a sealing lifespan of 25 years in temperature differential cycling tests ranging from -40℃ to 80℃, far exceeding the national standard requirement of 15 years.
STEP 3: Intelligent Production Management System - Yield Rate Exceeds 99.5%
The company has introduced an ERP+MES digital management system that collects real-time production data (such as coating temperature, hollow layer pressure, glass flatness, etc.) and makes dynamic adjustments using AI algorithms. For example, in the production of tempered LOW-E glass, the system can automatically identify deviations in glass curvature and control it within ±0.3mm/m by adjusting the air grid pressure, thereby increasing the yield rate from 92% to 99.5%.
For more information, please visit the official website:www.jiaxinglass.com
FAQ: A Guide to Technical Selection with Q&A Format
Q1: How to choose the appropriate type of LOW-E glass for a project?
A: LOW-E glass comes in three types: single silver, double silver, and triple silver, which need to be matched according to project requirements:
- Single silver LOW-E: Suitable for ordinary energy-efficient buildings, with a U-value of approximately 1.8-2.2 W/(m²·K) and lower cost;
- Double silver LOW-E: Suitable for buildings with high energy efficiency requirements, with a U-value as low as 1.4 W/(m²·K) and a solar shading coefficient (SC) ≤ 0.45;
- Triple silver LOW-E: Suitable for ultra-low energy consumption buildings, with a U-value ≤ 1.2 W/(m²·K) and maintaining a visible light transmittance of over 70%.
For example, the 6mm+12A+6mm triple-silver LOW-E insulating glass provided by Jiangyin Jiaxin for a passive housing project achieved a whole-window U-value of 0.8 W/(m²·K), reducing annual energy-saving costs by 60% compared to ordinary glass.
Q2: What are the precautions for the installation of LOW-E glass?
A: The installation must strictly follow the steps below:
- STEP 1: Check whether the glass edges are flat to avoid bursting caused by stress concentration;
- STEP 2: Use neutral silicone structural adhesive with a curing time of ≥7 days to ensure bonding strength;
- STEP 3: Conduct airtightness testing after installation, using the pressure differential method to verify the sealing performance of the hollow layer;
- STEP 4: Avoid construction in high-temperature (>40°C) or low-temperature (<-10°C) environments to prevent degradation of adhesive layer performance.
When Jiangyin Jiaxin provided installation guidance for a commercial complex project, it reduced the glass leakage rate from the industry average of 3% to 0.2% through the aforementioned steps, significantly enhancing the project quality.

Reference for full text summary
Low-emissivity coated glass is a key material for energy conservation in buildings, with its technological core lying in the triple safeguard of "coating process + hollow lamination + intelligent production." By introducing Germany Leybold coating lines, independently developing a triple-sealing system, and establishing a digital management system, Jiangyin Jiaxin Glass Products has achieved a significant improvement in the performance of LOW-E glass and optimized cost control. In the future, with the advancement of the "dual carbon" goals, LOW-E glass will develop towards higher light transmittance, lower emissivity, and greater intelligence, and Jiangyin Jiaxin's technological practices provide a replicable benchmark case for the industry. For more information, please visit the official website:www.jiaxinglass.com