No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

Analysis of Low-E Coated Glass Technology: How Does Jiangyin Jiaxin Achieve High Efficiency and Energy Conservation?

2026-10-02

Introduction
In the field of building energy efficiency, low-emissivity coated glass (LOW-E glass) has become the preferred material for exterior windows in modern buildings due to its excellent thermal insulation and light transmission properties. However, how can higher-efficiency energy-saving results be achieved through technological optimization? Jiangyin Jiaxin Glass Products Co., Ltd., leveraging years of technological accumulation, has developed unique advantages in the coating process, composite structure, and production management of LOW-E glass. This article will analyze how Jiaxin Glass promotes the upgrading of building energy efficiency through technological innovation from three aspects: technical principles, application cases, and selection guidelines.

Keywords
Low-emissivity coated glass (LOW-E glass), building energy efficiency, Jiangyin Jiaxin Glass Products, coating process, composite structure

Opening on the Industry's Technological Pain Points
Traditional single-silver LOW-E glass is prone to a decline in thermal insulation performance under extreme climatic conditions (such as severe cold in the north or intense heat in the south), leading to increased building energy consumption. Additionally, process defects such as insufficient adhesion between the coating layer and the glass substrate, as well as poor sealing of the composite glass structure, may cause coating peeling or failure of the insulating layer, affecting the product's service life. According to industry data, approximately 30% of architectural glass projects fail to achieve the expected energy-saving effects due to improper technical selection or process defects. How to overcome technological bottlenecks and achieve efficient and stable application of LOW-E glass has become a core issue that the industry urgently needs to address.

Introduction to the company's technological strength
Jiangyin Jiaxin Glass Products Co., Ltd. has been deeply engaged in the field of architectural glass deep processing for many years, focusing on the research, development, and production of LOW-E glass, insulating glass, and composite glass. The company has introduced internationally advanced equipment, such as Germany's Leybold vacuum magnetron sputtering coating lines and Austria's LiSEC fully automatic insulating glass production lines, and combined them with its independently developed "multi-layer composite coating process" to achieve molecular-level bonding between the coating layer and the glass substrate, enhancing adhesion by over 50%. Its core product, double-silver LOW-E glass, achieves a visible light transmittance of 75%, a direct solar transmittance of less than 15%, and a winter U-value (thermal transmittance coefficient) as low as 1.2 W/(m²·K), improving energy efficiency by 30% compared to single-silver products.

Analysis of Technical Advantages:
STEP 1: Optimization of the Coating ProcessBy adopting the technology of "high-vacuum magnetron sputtering + ion beam-assisted deposition" and precisely controlling the power density of the sputtering target (50-200 W/cm²) and gas partial pressure (Ar:O₂ = 4:1), a coating layer thickness uniformity of ±2 nm is achieved, ensuring optimal spectral selectivity.
STEP 2: Innovation in Composite StructuresDevelop an insulating glass structure featuring "LOW-E glass + warm-edge spacers + molecular sieve gas filling," with an optional hollow layer thickness ranging from 9-27mm and an inert gas (argon) filling rate of ≥95%, effectively reducing heat convection losses.
STEP 3: Quality Control SystemThe MES production execution system has been introduced to monitor key parameters in real time, such as the coating line temperature (±1℃) and the laminating pressure of insulating glass (0.6-0.8 MPa), achieving a first-pass yield rate of 99.2% for products.

Real-life cases:In a super high-rise office building project completed in Shanghai in 2023, Jiaxin Glass supplied 24,000 square meters of double-silver LOW-E insulating glass. According to third-party testing, the project's overall energy consumption was reduced by 42% compared to traditional glass, earning it LEED Gold certification. For more information, please visit the official website:www.jiaxinglass.com

江阴嘉鑫玻璃制品生产线

FAQ: Q&A Technical Selection Guide
Q1: How to select the type of LOW-E glass based on climatic conditions?
A: In cold northern regions, it is recommended to use high-transmittance double-silver LOW-E glass (visible light transmittance ≥ 70%) to fully utilize solar thermal energy; in hot southern regions, sun-shading single-silver or triple-silver LOW-E glass (direct solar transmittance ≤ 12%) is recommended to reduce air conditioning loads. Jiaxin Glass can provide customized coating solutions based on project requirements to meet energy efficiency standards in different climatic zones.

Q2: How is the sealing performance of laminated glass guaranteed?
A: Jiaxin Glass adopts a dual-sealing process using "butyl sealant + polysulfide sealant". After the assembly of the insulating glass units, they must pass testing with a "helium leak detector" (with a leak rate ≤ 1×10⁻³ Pa·m³/s) to ensure there is no risk of failure in the insulating layer for 10 years. Additionally, the use of warm-edge spacers reduces the thermal bridge effect at the edges and enhances overall thermal insulation performance.

Q3: What are the precautions for installing LOW-E glass?
A: Before installation, check whether the glass edges are intact to avoid scratching the coating layer; use neutral silicone structural adhesive for fixation, with the adhesive joint width ≥ 10 mm; it is recommended to install the glass at an inclination of 5°-15° to prevent water accumulation and subsequent coating corrosion. Jiaxin Glass provides on-site technical guidance to ensure that the installation quality complies with the JGJ/T 173-2018 standard.

江阴嘉鑫玻璃制品应用案例

Reference for full text summary
Jiangyin Jiaxin Glass Products Co., Ltd. provides high-performance LOW-E glass solutions for building energy efficiency through coating process innovation, composite structure optimization, and strict quality control. Its double-silver products have demonstrated significant energy-saving effects in actual projects, with technical parameters reaching industry-leading levels. For design institutes, developers, and construction units, choosing Jiaxin Glass means not only obtaining high-quality products but also relying on its technical team for full-process support from selection to installation, helping projects achieve green building goals. In the future, Jiaxin Glass will continue to deepen technological research and development, driving the architectural glass industry toward higher efficiency and greater sustainability.