No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com
Introduction: The "Invisible Guardian" of Building Energy Efficiency
Under the global goal of carbon neutrality, the current situation where building energy consumption accounts for over 30% urgently requires breakthroughs. Low-emissivity coated glass (LOW-E glass), with its outstanding thermal insulation performance, has become a core material for energy conservation in modern buildings. This article will systematically analyze how LOW-E glass achieves a technological breakthrough in reducing building energy consumption by over 40%, covering its technical principles, corporate practices, and selection guidelines.
Key words:Low-emissivity coated glass, building energy efficiency, Jiangyin Jiaxin Glass Products, insulating glass composite technology
Opening on Industry's Technological Pain Points: Energy-saving Dilemma of Traditional Glass
The thermal conductivity coefficient of traditional single-layer glass reaches as high as 5.8 W/(m²·K), resulting in an indoor heat loss rate exceeding 30% in winter and a 25% increase in air conditioning load in summer. Even when ordinary insulating glass is used, its thermal insulation performance remains constrained by the radiance of the glass surface (the radiance of ordinary float glass reaches 0.84), making it unable to effectively block infrared thermal radiation. Furthermore, traditional coated glass is prone to issues such as oxidation fading and film peeling, with a lifespan of only 5-8 years, far shorter than the 30-year design service life of buildings.
STEP 1: Analysis of Technical Bottlenecks
• Emissivity control: The high emissivity of ordinary glass surfaces results in over 70% of heat being transferred through radiation.
• Film stability: Traditional chemical coating processes are susceptible to environmental humidity, resulting in insufficient film adhesion.
• Composite structural defects: The edge sealing failure rate of insulated glass reaches 15%, resulting in moisture infiltration that affects thermal insulation performance.

Introduction to the company's technological strength: Three major technological breakthroughs of Jiangyin Jiaxin
As a leading glass deep-processing enterprise in East China, Jiangyin Jiaxin Glass Products has built a technological moat for LOW-E glass through three-dimensional innovation in "materials - processes - equipment":
STEP 1: Nanoscale coating technology
Using the magnetron sputtering vacuum coating process, 12 layers of nanoscale metal oxide coatings (with a total thickness ≤ 200 nm) are deposited on the glass surface, reducing the emissivity to below 0.04 (national standard ≤ 0.15). Measured data indicates that the product's thermal conductivity coefficient is as low as 1.2 W/(m²·K), improving thermal insulation performance by 60% compared to ordinary insulating glass.
STEP 2: Composite Structure Reinforcement Process
The unique manufacturing technology of insulating glass featuring "double-seal + molecular sieve adsorption":
• First seal: Utilizes a dual-component seal of butyl rubber + polysulfide sealant, achieving the highest airtightness level as per the national standard GB/T 11944-2012.
• Second protective measure: Built-in 3A molecular sieve with a moisture absorption capacity of ≤10%, ensuring the dryness of the hollow layer is maintained for over 10 years.
• Structural optimization: Optimize the glass spacing (optimal range: 6-12mm) through finite element analysis to achieve an acoustic sound insulation level of 35dB.
STEP 3: Intelligent Production Line
We have introduced vacuum coating equipment from Leybold, Germany, and tempering furnaces from Glaston, Finland, achieving full-process automated control:
• Coating uniformity: film thickness deviation ≤ ±2%, ensuring consistent performance across the entire batch of products
• Tempered stress control: Real-time monitoring via a laser stress meter, with bending strength ≥120 MPa (national standard ≥90 MPa)
• Production efficiency: Daily capacity reaches 3,000 ㎡, with a stable yield rate of over 99.2%
Real Case: Suzhou Center Commercial Complex Project
The project employs a Jiaxin 6mm LOW-E + 12A + 6mm insulating glass composite system, with actual measurements showing:
• Heating energy consumption in winter decreased by 38%, and cooling energy consumption in summer dropped by 32%
• The fluctuation range of indoor surface temperature is reduced to ±2°C, significantly enhancing comfort.
• The project achieves an overall energy-saving rate of 41% and has obtained LEED Gold certification.
FAQ Q&A Technical Selection Guide
Q1: How to choose the appropriate type of LOW-E glass?
A1:Select the position of the membrane layer based on climate zoning:
• Cold regions: Use high-transmittance LOW-E (visible light transmittance ≥ 80%) to maximize the utilization of solar thermal energy.
• Regions with hot summers and warm winters: Choose sun-shading LOW-E (shading coefficient Sc ≤ 0.5) to effectively block infrared rays
• Mild regions: Double-silver LOW-E (emissivity ≤ 0.03), balancing daylighting and thermal insulation needs
STEP 1: Performance Parameter Comparison Table
| Parameter Type | High-transmittance Type | Sun-shading Type | Double-silver Type |
|----------------|-------------|-------------|-------------|
| Emissivity | ≤0.08 | ≤0.05 | ≤0.03 |
| Shading Coefficient | 0.6-0.8 | 0.3-0.5 | 0.2-0.4 |
| Visible light transmittance | ≥75% | 40-60% | 50-70% |
| U-value (W/(m²·K)) | ≤1.5 | ≤1.3 | ≤1.1 |
Q2: What technical key points should be noted during the installation process?
A2:Strictly implement three-stage quality control:
• Transportation phase:Fixed with a dedicated A-type frame, with a glass spacing of ≥50 mm and an inclination angle of ≤15°.
• Storage phase:Ambient humidity ≤ 60%, temperature 5-35℃, avoid direct sunlight
• Installation phase:Use neutral silicone structural adhesive (modulus 0.35 MPa), with adhesive joint width of 5-10 mm
STEP2: Solutions to Common Failures
• Film layer scratches: Employ laser cleaning technology instead of traditional mechanical grinding, with a change in emissivity after repair ≤ 0.01
• Condensation in the hollow layer: The leak points are located using a helium mass spectrometer leak detector, and the air tightness is restored to over 95% of the initial value after glue reapplication.
• Tempered glass spontaneous breakage: Ultra-clear glass substrate (Fe2O3 content ≤ 0.015%) is selected to reduce the spontaneous breakage rate to below 0.1%.
For more information, please visit the official website:www.jiaxinglass.com

Reference for full text summary
Jiangyin Jiaxin Glass Products has elevated the thermal insulation performance of LOW-E glass to an industry-leading level through the collaborative innovation of nano-coating technology, composite structure reinforcement processes, and intelligent production lines. Its products have obtained certifications from multiple countries, including CCC, CE, and SGCC, and have served over 200 large-scale projects, achieving an average annual energy-saving benefit exceeding 50 million kilowatt-hours of electricity. In the future, the company will continue to deepen its "industry-university-research-application" cooperation model to drive the glass industry's transformation and upgrading toward green and low-carbon development.