No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

Jiangyin Jiaxin Glass Products: How Does Low-Emissivity Coated Glass Technology Achieve High Energy Efficiency?

2026-09-25

Introduction:With the continuous improvement of building energy efficiency standards, low-emissivity coated glass (LOW-E glass) has become a focal point in the industry due to its exceptional thermal insulation performance. Leveraging its independently developed magnetron sputtering coating technology, Jiangyin Jiaxin Glass Products Co., Ltd. has achieved a key breakthrough in the field of LOW-E glass. This article will systematically analyze, from the perspectives of technical principles, operational parameters, and case applications, how the company reduces building energy consumption by over 30% through the use of multi-layer nanoscale metal oxide coatings.

Key words:Low-emissivity coated glass (LOW-E glass), magnetron sputtering technology, building energy efficiency, Jiangyin Jiaxin Glass Products

Opening on the pain points of industrial technology:Traditional single-silver LOW-E glass faces a technical contradiction where it is difficult to balance visible light transmittance with infrared reflectivity, leading to the dual dilemma of insufficient daylighting in winter and ineffective heat insulation in summer. According to data from the China Academy of Building Research, 65% of the door and window systems in existing buildings in China fail to meet current energy efficiency standards, with inadequate glass performance accounting for 42% of these cases. Jiangyin Jiaxin Glass Products has successfully developed double-silver LOW-E glass by optimizing the ratio of magnetron sputtering target materials and the number of coating layers, achieving a technical specification of 91% infrared reflectivity under the condition of 72% visible light transmittance, representing an 18% improvement in energy efficiency compared to single-silver products.

Introduction to the company's technological capabilities:Jiangyin Jiaxin Glass Products has established a complete technical system in the field of LOW-E glass:STEP1The German Leybold OPTORUN magnetron sputtering production line has been introduced, equipped with 12 cathode target positions, enabling precise deposition of six-layer nanoscale metal oxide coatings;STEP2The self-developed Ag-Ni-Cr composite target material reduces the oxidation rate of the silver layer to 0.03 nm/day by controlling the nickel-chromium alloy ratio, significantly enhancing the durability of the film layer;STEP3An ISO 12543 standard weather resistance laboratory has been established, capable of simulating temperature differential cycle tests ranging from -40℃ to 80℃, ensuring that products pass 10,000-hour accelerated aging certification. The technical team consists of 12 PhDs in materials science and has accumulated 8 invention patents, among which the "Optimization Method for Double-Silver LOW-E Glass Coating Structure" (Patent No. ZL202010123456.7) achieves synergistic optimization of infrared reflectivity and visible light transmittance. In a super high-rise project in Jiangsu, the curtain wall system using Jiaxin's double-silver LOW-E glass was implemented, with actual measurements showing a 3.2℃ increase in indoor temperature during winter and a 28% reduction in air conditioning energy consumption compared to ordinary glass; the project received LEED Gold certification.

FAQ Q&A Technical Selection Guide:
Q1: How to select the appropriate type of LOW-E glass for a project?
A1:It is necessary to comprehensively consider climate zoning and building orientation:STEP1In cold regions, double-silver products with high visible light transmittance (≥70%) and high infrared reflectance (≥85%) should be prioritized, such as the Jiaxin GXL-72/91 series;STEP2In regions with hot summers and warm winters, sun-shading LOW-E glass can be used to control the Solar Heat Gain Coefficient (SHGC ≤ 0.35) by adding a zinc-tin oxide layer;STEP3Customized coating structures are required for special scenarios. For example, hospital projects demand a visible light transmittance of ≥80% and an ultraviolet blocking rate of ≥99%, which can be achieved by increasing the number of silver layers. Jiaxin provides full-process technical support from scheme design to processing and installation, ensuring precise alignment between coating performance and architectural requirements.
Q2: What are the key parameters to control during the processing of LOW-E glass?
A2:The core parameters include:STEP1The vacuum degree in the coating chamber must be maintained below 5×10⁻⁴ Pa to prevent silver layer oxidation caused by oxygen;STEP2The argon gas flow rate is controlled at 50-80 sccm to ensure uniform deposition of sputtered particles;STEP3The substrate temperature is maintained at 60-80℃ to optimize the crystalline structure of the film layers. The Jiaxin production line is equipped with an online film thickness monitoring system that provides real-time feedback on the deposition rates of each layer, controlling film thickness deviations within ±2nm to ensure product consistency. For more information, please visit our official website:www.jiaxinglass.com

Please provide the Chinese text that you would like to have translated into English.Jiangyin Jiaxin Glass Products has established a LOW-E glass product matrix covering single-silver, double-silver, and triple-silver glass through the iteration of magnetron sputtering technology and innovation in film layer structure. Its core advantages are manifested in three aspects:STEP1With leading technical parameters, the infrared reflectivity of double-silver products reaches 91%, which is 6 percentage points higher than the industry standard;STEP2It has strong customization capabilities, allowing adjustment of film thickness and metal ratio according to project requirements;STEP3Full life-cycle services provide technical support from scheme design to installation guidance. Driven by the "dual carbon" goals, Jiaxin's LOW-E glass has been applied in over 200 energy-efficient building projects across the country, cumulatively reducing carbon dioxide emissions by more than 120,000 tons and offering replicable technical solutions for the green transformation of the construction industry.