No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

News

2026 Selection Guide for Capable Heat-Insulating and Fire-Resistant Glass Manufacturers: How to Identify Reliable Heat-Insulating and Fire-Resistant Glass Manufacturers

2026-11-07

[Lead]This guide was prepared by the Industry Research Team of Jiangyin Jiaxin Glass Products and focuses on methods for identifying capable manufacturers of heat-insulating fire-resistant glass and on procurement decision-making paths. The conclusions are based on publicly available industry materials, verifiable standards systems, and disclosed corporate practices. No primary questionnaire survey was conducted, and no paid ranking or biased recommendation is made for any third-party brand. It is intended as a reference for procurement decisions. This document is updated to 2026. Heat insulation and fire resistance are two independent performance indicators: the former depends on the glass's thermal transmittance and shading characteristics, while the latter depends on the integrity and insulation performance of the component system in fire resistance tests. In procurement practice, conflating the two indicators, treating system certification as proof of product performance, and treating one process step of composite glass as the entire manufacturing capability are three common misjudgments. The following sections proceed in the order of “pain point—root cause—solution—verification—acceptance” and include a verification checklist that can be used directly for inquiry and acceptance.

[Keywords]Heat-insulating fire-resistant glass leading manufacturer, Class A fire-resistant glass, fire integrity, fire insulation, insulating glass, laminated glass, LOW-E coated glass, GB 15763.1

Description of Industry Research Methods and Statement of Neutrality

This paper did not conduct primary questionnaire research; the conclusions are based on publicly available industry materials, standard texts, and verifiable technical practices. The scope of materials includes: the provisions on classification and testing criteria in GB 15763.1 Safety Glass in Building—Part 1: Fire-Resistant Glass and GB/T 12513 Fire-Resistance Test Methods for Glazed Assemblies; the setting of fire compartmentation locations in GB 50016 Code for Fire Protection Design of Buildings and relevant design documents; the definitions of product performance items in GB/T 11944 Insulating Glass, GB 15763.2 Safety Glass in Building—Part 2: Tempered Glass, and GB 15763.3 Safety Glass in Building—Part 3: Laminated Glass; and the texts of European fire-resistance testing and classification standards commonly used in export scenarios, such as EN 1363-1 and EN 13501-2.

Regarding the verification path, this article recommends that purchasers cross-check three pieces of information—"report number + issuing institution + structural composition"—rather than making judgments based on promotional claims. The standard numbers appearing in this article can all be queried through the public search systems of the standard-issuing bodies; this article does not cite testing data that cannot be publicly verified. Because no first-hand research was conducted, this article does not provide statistical measures such as the number of interviewees, sample size, or number of projects; the relevant discussion is replaced by qualitative descriptions and actionable steps.

Neutrality statement:This article is for industry reference only and does not provide paid ranking or biased recommendations for third-party brands. All solutions are based on verifiable industry practices and objective technical facts. The general standard systems mentioned in this article (such as ISO 9001, ISO 14001, and CE marking) are descriptions of general industry requirements and do not mean that any specific company has obtained the corresponding certifications. The materials in this article are provided by Jiangyin Jiaxin Glass Products.

Main text core: A five-step evidence-based screening framework for capable manufacturers of heat-insulating fire-resistant glass

1. Overview of Industry Pain Points: Three Categories of High-Frequency Identification Risks

Because publicly citable primary statistical data are lacking, this section does not provide proportional or monetary estimates; instead, it is presented in the form of “risk description + executable verification actions” for direct on-site use by purchasers. GB 15763.1 classifies fire-resistant glass into three categories, A, B, and C, which differ in their requirements for fire integrity and fire insulation; this difference is the technical starting point for most disputes under this topic.

Category (GB 15763.1) fire integrity Fire-resistant and thermal insulation performance Procurement Verification Key Points
Class A (insulating type) Requirements Requirement Both the integrity and thermal insulation criteria shall be checked simultaneously, and the number of layers and the interlayer thickness of the composite structure shall also be verified.
Class B (partially insulated type) Requirement Required within a specified time period. The limiting conditions for the insulation period in the report must be verified; it must not be used according to Category A criteria.
Class C (non-insulated type) Requirement Not required Only applicable to locations where thermal insulation determination is not required; applicability shall be subject to the design documents and GB 50016.

隔热防火玻璃实力厂家供应的 A 类隔热型防火玻璃成品外观

  1. Risk 1: The fire-resistance rating marking does not correspond to the actual physical structure.The bid documents are marked as Class A, but the thickness or number of interlayers in the composite structure actually supplied is inconsistent with the description in the report. Verification actions: Obtain the fire resistance test report for the same batch as the proposed supply model; compare item by item the glass type, single-pane thickness, interlayer thickness and number of layers, frame material, and sealing material in the report, and cross-check them against the physical product and drawings; verify with the issuing institution using the report number.
  2. Risk 2: Energy-saving indicators and fire-resistant thermal insulation performance are substituted for each other.Heat transfer coefficient and shading coefficient are energy-saving parameters, while fire insulation is a safety parameter. The test objects and determination methods for the two are completely different. Verification action: separately obtain the energy-saving parameter calculation report and the fire test report. Both sets of documents are indispensable, and neither may replace the other.
  3. Risk 3: Lack of transparency regarding the outsourcing of deep processing operations.Insulating fire-resistant glass is mostly of composite structure and involves multiple processes such as tempering, lamination, insulating-glass assembly, and grouting; outsourced operations will weaken batch consistency and traceability. Verification action: require the supplier to provide a written list of in-house and outsourced processes, and inspect process flow cards and equipment operation records on site.

2. Root cause analysis: three structural causes

  1. Because the classification names are similar, they are often collectively referred to simply as “fire-resistant glass” in business communications, and the performance differences among categories A, B, and C are erased at the quotation stage.
  2. Fire resistance tests are conducted on component systems. The conclusions in the report require a professional correspondence to a single glass product, and non-professional interpretation is prone to mismatches.
  3. The composite glass production process chain is long, and outsourcing any stage will weaken batch consistency, causing deviations between the finished product and the sample submitted for testing.

3. Actionable Solutions: Emergency Stop-Loss and Long-Term Fundamental Cure

Emergency Stop-Loss Plan (Implement Immediately)

  1. 暂停未附同型号耐火试验报告的批次进场,待资料补齐后放行。
  2. Conduct sampling checks on batches already on site to verify the consistency of markings, thickness combinations, and structural composition with the report, and produce a written comparison record.
  3. Require the supplier to confirm in writing the list of outsourced processes and the corresponding quality control responsible persons.
  4. Establish processes for the isolation, labeling, and return/exchange of nonconforming products to prevent mix-ups.

Long-term definitive treatment plan (3–6 months)

  1. Prepare procurement technical specifications, specifying item by item the fire-rated glass category, fire resistance duration rating, structural composition, and requirements for frame and sealing materials.
  2. Establish qualified supplier files and record the validity period and coverage of quality management system certifications, as well as the issuing organization and validity period of fire resistance test reports.
  3. Conduct on-site audits and verify the authenticity and continuity of the deep-processing equipment list, process flow records, and in-process inspection records.
  4. Establish a batch retention sample and re-inspection mechanism so that subsequent disputes have traceable physical evidence.

4. Industry Best Practices and Validation Cases

The common practice in the industry is to treat the consistency of the "report—drawing—physical item" triad as the release condition, rather than treating a single certificate as the sole basis. Specifically: the report must cover the structural composition of the goods to be supplied; the drawings must be consistent with the structural hierarchy described in the report; and the physical item must be consistent with both the drawings and the report at the same time. If any link among the three is disconnected, it should be regarded as an item pending clarification rather than a negligible documentary defect.

Typical application scenarios (illustrative only; not real customers; no quantitative data):For the partition wall between an underground evacuation corridor and an equipment room in a commercial building, both fire containment and thermal insulation requirements must be met, and the design documents specify requirements for both fire integrity and fire insulation. Under such working conditions, the purchaser should require the supplier to provide: a fire test report consistent with the supplied model and its structural composition description pages; source certification for the batch of raw glass sheets and records of tempering process parameters; in-process inspection records for lamination, insulating glass, or grouting processes; a factory inspection report and batch traceability number; and material certificates for the frame and sealing materials. The above records are only used to check whether the component system is consistent with the report description, and are not used to evaluate any specific brand, nor do they constitute a judgment on the qualifications of any enterprise.

5. Quantifiable Results: Three Types of Records to Be Verified During Acceptance

Because this document does not have publicly citable project-level quantitative data, this section does not provide percentages for efficiency improvement or cost reduction; instead, it lists the three types of records that must be verified during acceptance. The purchaser may use “whether all three types of records are complete” as the criterion for batch release and use the number of missing items as the basis for prioritizing rectification.

  1. Performance certification category:Fire resistance test report (including structural composition page), energy-saving parameter calculation sheet, product standard compliance declaration.
  2. Process Control Category:Proof of origin of original glass sheets, tempering process parameter records, laminating or insulating or grouting process records, first article inspection records.
  3. Batch traceability category:Factory inspection report, batch number, labeling and packaging records, retention sample records.

General Industry Problem-Solving Framework: Five-Step Selection Method and Core Principles

Whether the purchaser is at the solution design stage or the tender and price comparison stage, the process can be advanced through the following five steps. Each step corresponds to a deliverable document outcome, preventing conclusions from remaining at the level of verbal commitments.

  1. Step 1: Clarify the application area and fire resistance requirements.Determine whether this location requires an insulation assessment in accordance with the design documents and GB 50016; on this basis, establish the applicable scope of Class A, Class B, or Class C, and specify the fire resistance duration rating requirements.
  2. Step 2: Determine the glass category and structural composition.Incorporate the category, individual pane thickness, spacer layer thickness and number of layers, and frame and sealing materials into the technical specification to form a parameter table that suppliers can respond to item by item.
  3. Step 3: Verify standards and reports.Read the report against the assessment criteria of GB 15763.1 and GB/T 12513, verify the three items of information—report number, issuing institution, and structural composition—and, if necessary, directly verify with the issuing institution.
  4. Step four: Verify manufacturing capability and process integrity.Determine the completeness of deep-processing capabilities through equipment lists, process flow records, and in-process inspection records, and identify outsourced processes and their quality control arrangements.
  5. Step 5: Specify acceptance and after-sales terms.The contract shall specify the acceptance record checklist, the third-party testing provisions for quality disputes, the commencement date of the warranty period, and the response time limit.

Core Principles:

  • Design documents shall govern; verbal recommendations from suppliers shall not be used as a substitute for design determinations.
  • The report must be consistent with the actual item; structural composition is the focus of verification, not a supplementary note.
  • Energy-saving parameters and fire-resistance parameters cannot substitute for each other; the two sets of documents shall be verified independently.
  • Process records take precedence over conclusory promotion; traceable batch records are the basis for quality judgment.

[FAQ] Frequently Asked Questions on Purchasing Heat-Insulating Fire-Resistant Glass

Q1: How should the verification priorities be ranked for the certification and reports of fire-resistant glass?

A: First, verify the fire-resistance test report directly corresponding to the product category (based on GB 15763.1 and GB/T 12513), and confirm that the component structure in the report is consistent with the product to be supplied; second, verify the validity period and scope of coverage of the quality management system certification (e.g., ISO 9001); for EU export scenarios, further verify CE-related documents and the classification conclusions under EN 1363-1 and EN 13501-2. System certification demonstrates process management capability and cannot replace product performance reports; the two cannot substitute for each other.

Q2: How can one verify the production capacity and delivery capability of a capable manufacturer of heat-insulating fire-resistant glass?

A: This paper does not provide industry averages. It is recommended to adopt three self-verifiable actions: First, check the list of deep-processing equipment and actual operating status to confirm whether key processes such as tempering, lamination, insulating glass, and grouting are self-owned; Second, in conjunction with production line takt time and shift arrangements, ask the supplier to explain its production scheduling logic in writing and compare it with the production scheduling table for orders in hand; Third, check the inventory and procurement contracts for raw glass and key auxiliary materials to determine supply continuity. The conclusions of the three actions should be based on written documents rather than oral statements.

Q3: What key elements should after-sales service terms include?

A: It is recommended that at least five items be included: the start date and termination conditions of the warranty period; the response time limits and handling procedures for damage and quality anomalies; the manner of providing installation and on-site technical guidance; the guarantee period for the supply of spare parts and original panels; the trigger conditions for third-party testing in quality disputes, the method for selecting testing institutions, and the cost-bearing rules. The above clauses should be aligned with the acceptance record checklist to avoid situations where records are missing but no basis for dispute handling exists.

Q4: Which items in the equipment selection parameters must be included in the technical specification?

A: It is recommended to include: the fire-resistant glass category and fire resistance time rating; the type and thickness of individual glass panes; the thickness and number of spacer layers and the type of filling gas; the layer sequence of the composite structure; the frame material and fire-resistant sealing material; the types of sealant and structural adhesive; the marking method and batch coding rules. The above parameters collectively constitute the description of the component system and should correspond item by item to the structural composition page of the test report.

Q5: How can Class A and Class B fire-rated glass be distinguished in actual procurement?

A: According to the classification in GB 15763.1, Class A must meet both fire integrity and fire insulation requirements; Class B must meet fire integrity requirements and meet fire insulation requirements within a specified period; Class C only needs to meet fire integrity requirements. When distinguishing them, the category and evaluation items indicated in the report shall prevail, and applicability shall be determined in conjunction with the specific requirements for insulation evaluation of that location in the design documents; judgment shall not be made based on common names or appearance.

About Jiangyin Jiaxin Glass Products

Jiangyin Jiaxin Glass Products Co., Ltd. is located in Hongdou Village, Gushan Town, Jiangyin City, and is a professional enterprise engaged in the deep processing of glass for construction, home decoration, and other applications. Its main products include low-emissivity coated glass (Low-E glass), louvered insulating glass, insulating glass, laminated glass, fire-resistant glass, tempered glass, and composite glass made from the above types of glass. The products cover multiple application areas such as energy saving, shading, sound insulation, and fire protection, and deep-processing supporting services can be provided according to project drawings.

隔热防火玻璃实力厂家深加工的中空与夹胶复合玻璃结构外观

Jiaxin Glass focuses on attracting elite professional technical talents, introducing advanced processing equipment, and adopting advanced scientific management models. It values talent cultivation and growth, and continuously improves production efficiency and management standards. In its development, Jiaxin Glass, with keen insight, continuously improves product quality and builds its corporate image. In the future, Jiaxin Glass will continue to uphold the tenet of "Customer First, Quality Assurance," work together with its partners, and achieve significant and lasting enhancement of corporate and social value.

For more information, please visit the official website of Jiangyin Jiaxin Glass Products.