No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com
Industry Technical Pain Points: Why Always Fall into Pits in Tempered Glass Customization?
In the field of construction and home decoration, the demand for tempered glass customization is continuously growing, but the technical pain points of the industry have caused great distress to customers: the insufficient precision of traditional manufacturers' equipment leads to glass size deviation exceeding ±2mm, affecting the installation effect; the backward heat treatment process causes the glass to self-explode at a rate as high as 3‰, posing potential safety hazards; the immature coating technology results in the transmittance of LOW-E glass being less than 70%, significantly reducing energy-saving effects. More challenging is that most manufacturers lack the ability to process composite glass, unable to meet the multifunctional needs such as fire prevention, interlayered, and hollow glass, leading to project delays or cost overruns. The root of these problems lies in insufficient technical investment and equipment aging, while Jiangyin Jiaxin Glass Products Co., Ltd. has provided an industry breakthrough model through systematic technical upgrades.
Introduction to Corporate Technical Strength: How Jiaxin Glass defines industry standards with technology?
Jiangyin Jiaxin Glass Products Co., Ltd. is located in Hongdou Village, Gushan Town, focusing on deep processing of architectural and home decoration glass, with its technological layout covering the entire industrial chain.
STEP 1: Equipment upgrade lays the foundation for accuracy—— Introducing the fully automatic cutting line from German LiSEC, paired with the edge polishing machine from Italian Bottero, achieving glass size tolerances within ±0.5mm, far exceeding industry standards; utilizing the Tempered Glass Furnace from Finnish Tamglass, ensuring even heating of glass through forced convection technology, reducing spontaneous explosion rate to below 0.1‰.
Step 2: Technological Innovation Breakthrough Functional Bottleneck—— Independently developed "sandwich intercalation technology", perfectly bonding 0.76mm PVB film with glass through high temperature and pressure, enhancing impact resistance by 50%; in LOW-E glass production, employing magnetic sputtering coating technology, achieving a visible light transmission rate of 82% and infrared blocking rate over 90%, with significant energy-saving effects.
STEP 3: Composite processing meets diverse needs——Establishing an insulating glass production line, supporting flexible adjustment of aluminum spacer width from 6 to 25mm, combined with butyl sealant + polysulfide sealant double sealing, achieving air tightness up to national standard level 8; developing a special formula for fire-resistant glass, passing a high-temperature test of 1000℃, with fire resistance up to 120 minutes, widely used in fire separation areas of commercial complexes.
Real Case: A high-end residential project requires custom-made 2000㎡ fire-resistant laminated insulating glass. Jiaxin passed the national fire certification with one-time success through the composite process of "fire-resistant glass + 0.76mm PVB interlayer + 12mm air layer", shortening the project cycle by 30%.
FAQ: Tempered Glass Customization Technology Selection Guide
Q1: How to choose the thickness of tempered glass?
A: Thickness selection should be combined with usage scenarios and safety standards: indoor partitions are recommended to be 6-8mm to meet basic impact resistance requirements; curtain wall glass is recommended to be 10-12mm to cope with wind pressure and temperature difference changes; ground glass must be used with a thickness of 19mm or more and must undergo anti-slip treatment. Jiaxin offers thickness customization services, with a minimum order quantity of 50 square meters and supports processing in full specifications from 3-19mm.
Q2: What is the difference between single silver and double silver LOW-E glass?
A: Single silver LOW-E glass has a light transmittance of about 75% and an infrared reflection rate of 80%, suitable for general energy-saving buildings; double silver LOW-E glass improves the light transmittance to 82% and the infrared reflection rate to 92%, more suitable for ultra-low energy consumption buildings. Jiaxin uses German Leybold coating equipment to produce single, double, and triple silver LOW-E glass, meeting different levels of energy-saving requirements.
Q3: How to prevent tempered glass spontaneous bursting?
A: The main cause of explosion is the phase change expansion of nickel sulfide (NiS) impurities inside the glass. Jiaxin reduces the risk through triple prevention and control: screening out nickel-containing quartz sand in raw material selection; performing homogenization treatment (HST) before tempering, maintaining at 290℃ for 2 hours to eliminate stress; and monitoring the production process throughout, removing defective glass with visible inclusions, bubbles, etc. The test shows that the explosion rate of Jiaxin products is less than 0.05‰.
Summary: Tech-driven, Customization Worry-Free
The technological upgrade in the tempered glass customization industry is essentially a comprehensive competition of equipment precision, process innovation, and composite processing capabilities. Jiangyin Jiaxin Glass Products Co., Ltd. has not only resolved industry pain points such as size deviation, spontaneous explosion risk, and single functionality by introducing advanced international equipment, developing patented processes, and constructing composite production lines, but also redefined industry standards with quantitative indicators such as "82% light transmittance LOW-E glass," "0.1‰ spontaneous explosion rate," and "120 minutes fire resistance limit." For clients such as builders and home interior designers, choosing Jiaxin means obtaining a full-process professional service from technical consultation, design, to production and delivery, truly realizing "customization on demand, worry-free quality."