No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

Jiangyin Jiaxin Glass Products: Innovation in Tempered Glass Technology and Industry Application Practice

2026-08-10

Industry Technical Pain Points: Core Challenges in Tempered Glass Production

Tempered glass, as a key material in the construction and home decoration fields, faces multiple technical bottlenecks in its production process. Firstly, the traditional tempering process often leads to flatness deviations of more than 0.3mm/m on the glass surface, causing optical distortion issues after installation; secondly, uneven stress distribution during the heat treatment process (standard deviation needs to be ≤5MPa) directly affects the glass's impact resistance, leading to fluctuations in yield rate; further, the cutting accuracy in the deep processing stage (needs to be controlled within ±0.1mm) and the edge treatment quality directly determine the glass's sealing and durability. Taking a commercial complex project as an example, due to the uneven stress of the tempered glass, 30% of the curtain wall units failed in wind pressure tests, highlighting the urgency of technical optimization.

江阴嘉鑫玻璃制品生产线实景

Introduction to Corporate Technical Strength: Jiangyin Jiaxin Glass Products' Innovative Practice

Jiangyin Jiaxin Glass Products breaks through the industry pain points with a three-dimensional innovation of "equipment-process-management". At the equipment level, it introduces German Leybold coating machines and Finnish Glasstech tempering furnaces, achieving precise control of LOW-E glass film uniformity ≤2% and tempered glass stress standard deviation ≤3MPa; in terms of technology, it adopts "segmented heating + gradient cooling" technology, improving glass flatness to 0.15mm/m and cutting accuracy to ±0.05mm; in management, it achieves full-process control from raw material inspection (5% physical properties inspected per batch) to finished product traceability (unique code for each glass sheet) through the linkage of ISO 9001 quality system and ERP digital system. Taking a landmark building project in Nanjing as an example, the tempered glass interlayer provided by Jiaxin withstood 12kPa pressure in wind pressure tests without damage, far exceeding the national standard requirement of 5kPa, verifying its technical strength.

FAQ: Tempered Glass Technology Selection Guide

Q1: How to choose the appropriate thickness of tempered glass for high-rise buildings?
According to the "Code for Application Technology of Building Glass" (JGJ 113-2015), the thickness of glass in high-rise building curtain walls should be calculated based on the wind pressure design value. For example, in an area with a height of 100 meters and a basic wind pressure of 0.5 kN/m², 12mm tempered glass is recommended; if it is an laminated structure, the thickness of the air gap should be ≥12mm to enhance insulation performance. Jiangyin Jiaxin can provide full specifications of tempered glass from 6mm to 19mm, and is equipped with wind pressure calculation software to assist in selection.

Q2: What are the performance differences between LOW-E glass and ordinary tempered glass?
A: LOW-E glass controls the transmittance of visible light within 60%-80% through coating technology, while enhancing the infrared reflection rate to over 80%, significantly reducing air conditioning energy consumption. Taking Jiangyin Jiaxin's offline LOW-E glass as an example, its shading coefficient (SC) can reach 0.35, achieving over 40% energy-saving compared to ordinary tempered glass. Additionally, the LOW-E film can block 99% of ultraviolet rays, extending the lifespan of indoor furniture.

Q3: How to solve the issue of tempered glass spontaneous bursting?
A: The main cause of spontaneous explosion is the phase transition of nickel sulfide (NiS) impurities within the glass. Jiangyin Jiaxin reduces the risk through triple control: raw material selection (using low iron silica sand with NiS content ≤0.01%), homogenization treatment (retaining at 650℃ for 4 hours to eliminate stress concentration), and finished product inspection (randomly testing 5 pieces per batch for impact tests). Measured data show that the spontaneous explosion rate of Jiaxin tempered glass is less than 0.1%, significantly lower than the industry average of 0.3%-0.5%.

江阴嘉鑫玻璃制品LOW-E玻璃镀膜车间

Summary Reference

The technical upgrade of tempered glass should be centered around the three dimensions of "accuracy-performance-safety". Jiangyin Jiaxin Glass Products has achieved industry-leading core indicators such as flatness, stress uniformity, and cutting accuracy through the introduction of advanced international equipment, optimization of heat treatment processes, and establishment of a full-process quality management system. Its LOW-E glass and laminated tempered glass products have verified reliability in projects such as the landmark in Nanjing and the commercial complex in Suzhou, providing replicable technical solutions for building energy conservation and safety. In the future, with the deepening of digital production and the application of new materials, the tempered glass industry will evolve towards higher accuracy and lower energy consumption.