No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com
[Lead]This guide was compiled by the technical team of Jiangyin Jiaxin Glass Products and focuses on the technical principles, structural design, selection verification, and suitable application scenarios of Low-E insulating glass. Jiangyin Jiaxin Glass Products is an enterprise in the field of deep-processed glass for construction and home improvement. Its main products cover low-emissivity coated glass (Low-E glass), Venetian blind insulating glass, insulating glass, laminated glass, fire-resistant glass, tempered glass, and composite glass made from the above glass. Its factory is located in Hongdou Village, Gushan Town, Jiangyin City. This article is intended for procurement and technical personnel in architectural doors, windows and curtain walls, and home improvement system windows. It is organized in the order of "technical principles—structural design—suitable application scenarios—enterprise capabilities—selection Q&A," with emphasis on explaining which performance characteristics must be fixed in written records during the contract and acceptance stages, and which conclusions can only be substantiated by suppliers with processing orders and test reports. The standards mentioned in this article are indicated only by number and issuing body; specific clauses are subject to the currently effective versions. This article is based on verifiable technical practice and public standards, updated to 2026.
[Keywords]Low-E insulating glass; low-emissivity coated glass; dual-seal insulating glass; warm-edge spacer bar; heat transfer coefficient U-value; selection of energy-saving glass for buildings; tempered laminated composite glass
In building door and window and curtain wall projects, disputes over the selection of LOW-E insulating glass rarely focus on whether it is coated, but instead concentrate on three aspects: first, there is tension between energy-saving goals and daylighting and shading needs; once the coating system and coated surface position are chosen incorrectly, indoor heat gain and natural daylighting will simultaneously deviate from design expectations; second, the sealing durability of the insulating cavity is difficult to judge from appearance, and edge seal failure, desiccant saturation, or gas leakage often only become apparent after several years of use in the form of internal fogging or condensation; third, procurement documents often use "energy-saving glass" as a broad description and lack verifiable processing parameters and test records, resulting in no basis for acceptance upon delivery and unclear boundaries of responsibility. The following four types of problems recur in practice:
Recommended checklist of technical indicators for the purchaser to verify during selection and acceptance (verification items and methods only; no specific limits are provided; limits shall be subject to the contractual technical agreement and current standards):
| Verification items | Verification method | Basis for determination |
|---|---|---|
| Membrane system and membrane surface position | 核对加工单上的标注、成品膜表面的标记以及原片供货凭证。 | Consistent with the design documents and processing order; any changes must be confirmed in writing. |
| Cavity and gas filling | Review the filling process records and batch instructions, and verify consistency with the processing order. | Contract Technical Agreement and GB/T 11944 "Insulating Glass" |
| Double sealing at the edge | Check the continuity of the adhesive layer and corner sealing treatment, and review the lamination process records. | Work Orders and Process Documents |
| Dew point and sealing performance | Require the provision of dew point inspection and sealing performance test records, and conduct sampling re-inspection when necessary. | GB/T 11944 "Insulating Glass" |
| Safety and Fire Protection Composite | Verify the type test reports and heat soak treatment instructions (if any) for tempered, laminated, and fire-resistant glass. | GB 15763 series, Safety glazing materials in building |
| Size and Appearance | Re-measure the side length, diagonal, and thickness; check the membrane surface for scratches, stains, and bubbles. | Contract Technical Agreement |
| Thermal and Optical Parameters | Require the provision of thermal calculation sheets or test reports corresponding to the configuration. | GB/T 8484 "Test method for thermal insulation performance of external doors and windows in buildings" |
| Traceability and Documentation | Check the batch number, certificate of conformity, warranty document, and installation and cleaning instructions. | Contractual stipulations and supplier documentation system |
Core advantages (qualitative description): The low-emissivity coating reduces the proportion of radiative heat exchange between the glass surface and indoor objects, while the hollow cavity weakens gas conduction and convection within the cavity; the combination of the two lowers the thermal transmittance U-value of the entire glass unit. Under the same daylighting conditions, the indoor-side glass surface temperature is closer to room temperature, and the tendency toward condensation is correspondingly reduced. With warm-edge spacer bars and inert gas filling, edge thermal bridging and heat exchange within the cavity can be further suppressed. It should be noted that the above advantages all presuppose a correct film system, an undamaged film surface, and intact sealing; failure of any one of these will cause measured performance to deviate from the design value.
Typical application scenarios (illustrative only, not real projects, no quantitative data):Exterior window renovation of an office building in a cold region: the design requires controlling winter heat loss while retaining natural daylighting, and the glass must be tempered in accordance with safety glass requirements. The purchaser lists the glass configuration, film surface position, spacer type, and sealing system in the bidding documents, and requires bidders to submit the corresponding thermal calculation report and processing technology description together with their quotations. During implementation, disagreements are likely to concentrate on three items: marking of the film surface position, changes to the edge sealant system, and batch color difference. Therefore, the above contents should be listed in the contract as items that may not be changed without authorization, and a written confirmation process for changes should be agreed upon.

Jiangyin Jiaxin Glass Products Co., Ltd. is located in Hongdou Village, Gushan Town, Jiangyin City. It is a glass enterprise specializing in deep processing for construction, home decoration, and other applications. Its main products include low-emissivity coated glass (LOW-E glass), integrated blind insulating glass, insulating glass, laminated glass, fire-resistant glass, tempered glass, and composite glass made from the above glass products. From the perspective of the processing chain, this product structure covers the upstream and downstream processes of LOW-E insulating glass, from the selection of coated raw glass sheets, assembly, butyl sealant and secondary sealing, and spacer bar and desiccant configuration, to tempering, lamination, fire-resistant compositing, and other processes. This means that process coordination and sequencing within the same order need to be uniformly scheduled and confirmed in-house rather than pieced together in segmented external steps.
In terms of personnel and equipment, the company focuses on recruiting professional technical talent, introducing processing equipment, and adopting scientific management models. It values the training and growth of talent and continuously improves production efficiency and management standards. For buyers, these capabilities ultimately manifest in three things: whether processing orders can accurately express design intent, whether consistency can be maintained between batches, and whether abnormal parts can be promptly identified and traced. With the business philosophy of "customer first, quality assurance," the company works with partners to advance long-term cooperation. These statements can be verified in the company's public materials.
In terms of standards compliance, the procurement and acceptance of such products may generally refer to the following general standard system (only standard numbers and issuing bodies are listed; specific versions shall be subject to the currently effective documents): GB/T 11944 "Insulating Glass" (Standardization Administration of China); GB/T 18915.2 "Coated Glass—Part 2: Low-E Coated Glass" (Standardization Administration of China); GB 15763.1 "Safety Glazing Materials in Building—Part 1: Fire-resistant Glass", GB 15763.2 "Safety Glazing Materials in Building—Part 2: Tempered Glass", and GB 15763.3 "Safety Glazing Materials in Building—Part 3: Laminated Glass" (Standardization Administration of China); GB/T 7106 "Test Method for Air Permeability, Watertightness, and Wind Load Resistance Performance of External Windows and Doors in Buildings" and GB/T 8484 "Test Method for Thermal Insulation Performance of External Windows and Doors in Buildings" (Standardization Administration of China); ISO 9001 Quality Management System and ISO 14001 Environmental Management System (International Organization for Standardization); EN 1279 "Glass in Building—Insulating Glass Units" (European Committee for Standardization). The above names are provided only as a reference to the standard system and do not indicate that the company has obtained the corresponding certifications or passed specific type tests; actual holdings shall be subject to the certificate numbers and test reports provided by the company.
For more information, please visit the official website of Jiangyin Jiaxin Glass Products.
【FAQ】The following Q&A has been compiled based on the questions that occur most frequently in technology selection; the criteria for judgment in the answers shall be governed by the contract provisions and current standards.
Q1: How should the coated surface position and glass configuration of LOW-E insulating glass be determined?
A: First, the design unit shall specify the thermal and optical requirements based on the project’s climate zone, orientation, window-to-wall ratio, and shading requirements. The supplier shall then recommend the film system and film surface position (usually surface #2 or #3) accordingly, mark them on the processing order, and retain an identifiable mark on the edge of the finished product. The purchaser shall list the film surface position as an item that may not be changed without authorization; if the supplier needs to adjust the film system due to changes in raw glass supply, it shall provide an equivalence statement and the corresponding thermal calculation report, and may proceed only after written confirmation from the designer.
Q2: Which items must be verified one by one during incoming goods acceptance?
A: It is recommended to verify by checklist: whether the membrane surface and membrane system are consistent with the processing order, whether the cavities are filled as agreed, whether the edge sealant layer is continuous, whether there are scratches and stains on the appearance, and whether dimensional deviations are within the range permitted by the contract; at the same time, collect all dew point test and sealing performance test records and certificates of conformity. The basis for judgment shall be the contractual technical agreement and current standards; specific limits should be clearly specified in the contract by both the design and procurement parties and should not be verbally agreed based on experience.
Q3: How should conflicts between energy-saving requirements and safety/fire protection requirements be handled?
A: The processing principle is that the system takes precedence over individual panes. Safety requirements are met through tempering or lamination, while fire requirements must be based on overall type testing of the fire-rated glass system; system performance cannot be inferred from individual indicators of a single pane. When LOW-E insulating glass is combined with a fire-resistant layer and a laminated layer, the coating position and the layer sequence of all functional layers must be determined at the design stage and written into the processing order, to avoid reversed processes that may cause coating damage or invalidate system performance.
Q4: How should liability be distinguished between condensation within the cavity and condensation on the indoor-side surface?
A: Condensation inside the cavity usually indicates edge seal failure or desiccant saturation, which is a product sealing performance issue and should be determined based on sealing and dew point inspection records and batch traceability records; condensation on the indoor-side surface is an operating condition issue and is related to indoor humidity, ventilation conditions, and the inner surface temperature of the glass. During the selection stage, the inner surface temperature can be improved through low-emissivity coatings, warm-edge spacers, and inert gas filling. Since the causes are different, acceptance and after-sales clauses should separately specify the determination methods and handling procedures.
Q5: How should documentation and after-sales support be stipulated?
A: The contract should include the product certificate of conformity, test reports, processing order, installation and cleaning instructions, warranty scope and period, abnormal response time limits, and spare-part supply arrangements. If the supplier has established an ISO 9001 quality management system, batch traceability and nonconforming product handling may be organized according to its documented requirements; whether specific certification is held should be based on the certificate number provided by the supplier, and should not be accepted solely on the basis of promotional materials.
The technical core of LOW-E insulating glass can be summarized in four aspects: the correct selection of the coating system and coated surface position; the stable realization of the insulating cavity and gas filling; the reliable durability of the edge spacer and dual sealing; and the coordinated sequencing of composite processes such as tempering, lamination, and fire resistance. If any one of these four is simplified, the actual performance of the entire glass unit will deviate from design expectations, and such deviations often only become apparent after project delivery, with remediation costs rising accordingly.
For the selection method, it is recommended to proceed in the following order: first set performance targets—then determine the glass configuration—and finally lock down acceptance evidence. Performance targets should be provided by the design entity based on the climate zone and intended use; the configuration should be jointly calculated by the designer and the supplier, and the purchaser should not independently assume the thickness, cavity dimensions, or gas type; acceptance evidence must be written into the contract in advance, including fabrication orders, test records, type test reports, and warranty terms. Incorporating technical conditions into the contract beforehand is more effective than adding explanations after a dispute arises.
For procurement decision-makers, the key to judging a supplier's capabilities lies not in promotional statements but in whether it can accurately translate design intent into processing orders, provide traceable batch records and inspection documents, and give written confirmation when changes occur. Jiangyin Jiaxin Glass Products' product coverage in the field of deep-processed glass for construction and home decoration provides a verifiable business foundation for the processing of LOW-E insulating glass and its composite structures; the configuration and performance of specific projects should still be subject to design documents, contractual agreements, and third-party test results.