No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com
Introduction: The Dual Challenge of Energy Efficiency and Aesthetics in Architecture
Driven by the "dual carbon" goals, the performance requirements for glass in the construction industry have shifted from a single focus on light transmittance to comprehensive demands encompassing energy efficiency, safety, and aesthetics. Low-emissivity coated glass (LOW-E glass) has become the preferred material for modern building curtain walls, doors, and windows due to its excellent thermal reflection properties. However, balancing high light transmittance with low emissivity and adapting to the architectural needs of different climatic zones remain key technical challenges for the industry. This article takes the LOW-E glass production line of Jiangyin Jiaxin Glass Products as an example to analyze its technological implementation path and practical outcomes.
Keywords:Low-emissivity coated glass (LOW-E glass), building energy efficiency, Jiangyin Jiaxin Glass Products, thermal reflection performance, composite glass technology
Opening on Industry Technical Pain Points: Energy-saving Bottleneck of Traditional Glass
The thermal conductivity coefficient (U-value) of traditional single-pane glass can reach as high as 5.8 W/(m²·K), leading to rapid indoor heat loss in winter and a sharp increase in air conditioning load due to solar radiation in summer. According to statistics, approximately 40% of building energy consumption is lost through doors and window glass. While ordinary insulating glass can reduce the U-value to 2.8 W/(m²·K), it still fails to meet the extreme climate demands of severely cold regions (such as Northeast China) or hot regions (such as South China). Additionally, traditional coated glass is prone to issues such as coating oxidation and color variation, affecting the long-term stability of the building's appearance.
Technical contradictions:
STEP 1: Balancing high light transmittance and low emissivity—every 10% increase in light transmittance (T) may raise the Solar Heat Gain Coefficient (SHGC) by 0.15, increasing the risk of overheating in summer;
STEP 2: Conflict between film durability and processing technology—Magnetron sputtering coating needs to be completed in a vacuum environment, but controlling film uniformity in large-scale production is highly challenging;
STEP 3: Lack of climate-adaptive design—It is difficult for the same product to simultaneously meet the insulation needs in the north and the shading needs in the south, requiring customized development.

Introduction to the company's technological strength: Jiaxin Jiangyin's innovative practices in LOW-E glass
Jiangyin Jiaxin Glass Products Co., Ltd. has been deeply engaged in the field of architectural glass deep processing for 12 years. Its LOW-E glass production line employs German Leybold magnetron sputtering equipment and integrates independently developed "dual-chamber dynamic coating technology," achieving precise control with a film thickness error of ≤ ±2nm and an adjustable light transmittance range of 55%-85%. As of 2023, the company has obtained 3 patents related to LOW-E glass (Patent Nos.: ZL2021XXXXXXX.X, etc.), with its products certified by the National Glass Quality Supervision and Inspection Center. The minimum U-value can reach 1.0 W/(m²·K), reaching international advanced standards.
Technological breakthroughs:
STEP 1: Climate-adaptive Film Layer Design—Develop "insulating" (for northern regions) and "solar-shading" (for southern regions) film systems tailored to different climatic zones, achieving dynamic matching of SHGC and T by adjusting the silver layer thickness and dielectric layer materials. For example, northern products employ a triple-silver LOW-E structure with SHGC ≤ 0.25 and T ≥ 70%; southern products utilize a double-silver structure with SHGC ≤ 0.4 and T ≥ 65%.
STEP 2: Integration of Composite Glass Technology—Combining LOW-E glass with insulating glass and laminated glass to form a "LOW-E+12A+LOW-E" double-cavity structure, reducing the overall U-value to 0.8 W/(m²·K) and improving energy efficiency by 85% compared to single-pane glass.
STEP 3: Intelligent Production Control and Management—Introduce the MES system to monitor key parameters such as coating chamber temperature (±0.5℃) and vacuum level (≤5×10⁻⁴ Pa) in real time, ensuring consistent performance across each batch of products.
Measured data:In a commercial complex project in 2023, the application of Jiaxin LOW-E glass reduced the building's annual energy consumption by 22%, with a 31% reduction in winter heating energy consumption and an 18% reduction in summer cooling energy consumption. For more information, please visit the official website:www.jiaxinglass.com

FAQ Q&A Technology Selection Guide
Q1: How to select the appropriate type of LOW-E glass for a project?
A: It is necessary to comprehensively consider climate zones, building orientations, and functional requirements. For example, in severely cold regions, priority should be given to selecting heat-insulating products with high light transmittance (T ≥ 70%) and low Solar Heat Gain Coefficient (SHGC ≤ 0.25); in hot regions, sun-shading products with medium light transmittance (T = 60%-65%) and low SHGC (≤ 0.4) can be chosen. Jiaxin offers free climate adaptability analysis services and can generate a product selection report based on meteorological data from the project location.
Q2: How to control the processing cycle and cost of LOW-E glass?
A: Jiaxin employs a modular production line, enabling a processing cycle of just 7 days for standard-sized products (e.g., 1200×2400mm), which is 30% shorter than the industry average. In terms of costs, the unit price of double-silver LOW-E glass is approximately 120-150 yuan/㎡, while triple-silver products cost around 180-220 yuan/㎡. By utilizing composite glass technology, the overall costs can be further reduced (e.g., the "LOW-E + insulating" structure increases costs by about 40% compared to single-pane glass, but the energy-saving benefits can be recouped within 3-5 years).
Q3: How is the durability of the coating ensured?
A: Jiaxin LOW-E glass shows no corrosion after 1000 hours in the neutral salt spray test (NSS) and no discoloration after 5000 hours in the ultraviolet accelerated aging test (QUV), with its film adhesion reaching Class 0 (ASTM D3359 standard). In practical engineering applications, it is recommended to avoid using cleaners containing hydrofluoric acid and to regularly inspect the condition of the sealant to prevent moisture ingress.
Reference for detection indicators:
STEP 1: Light transmittance (T): Measured using a spectrophotometer, standard value ±2%;
STEP 2: Solar Heat Gain Coefficient (SHGC): Calculated using simulation software (e.g., WINDOW 7.7) and verified through actual measurements;
STEP 3: U-value: Tested in accordance with GB/T 8484-2020 "Grading and Test Method for Thermal Insulation Performance of Building External Windows and Doors".
Reference for Full-text Summary
The technological evolution of low-emissivity coated glass has advanced from a single function to systematic solutions. Jiangyin Jiaxin Glass Products has achieved a balance in LOW-E glass in terms of energy efficiency, cost controllability, and architectural aesthetics through climate-adaptive coating design, integrated composite glass technology, and intelligent production management and control. Its products have been applied in over 200 commercial and residential projects, cumulatively covering an energy-saving area exceeding 5 million square meters, providing a replicable technological path for the industry. In the future, with the integration of dynamic coating technology and smart light-adjusting glass, LOW-E glass will further expand its application scenarios in zero-carbon buildings.