No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

Analysis of Low-E Coated Glass Technology: How Does Jiangyin Jiaxin Achieve High Efficiency and Energy Conservation?

2026-10-23

Introduction
In the field of building energy efficiency, low-emissivity coated glass (LOW-E glass) has become the preferred material for modern building curtain walls, doors, and windows due to its exceptional thermal insulation performance. As a leading deep-processing glass enterprise in East China, Jiangyin Jiaxin Glass Products Co., Ltd. has achieved a technological breakthrough by introducing an internationally advanced magnetron sputtering coating production line and integrating independently developed process optimization solutions, enabling the LOW-E glass to achieve an emissivity as low as 0.08 and a visible light transmittance as high as 75%. This article will analyze how Jiaxin Glass drives upgrades in building energy efficiency through technological innovation from three dimensions: technical principles, corporate strength, and application cases.

Key words
Low-emissivity coated glass (LOW-E glass), building energy efficiency, magnetron sputtering coating, emissivity, visible light transmittance, Jiangyin Jiaxin Glass Products

Opening on the Pain Points of Industry Technology
Traditional single-silver LOW-E glass is prone to issues such as coating oxidation and increased emissivity under extreme climatic conditions, resulting in a 15%-20% decline in winter thermal insulation performance. Although double-silver LOW-E glass enhances heat insulation, its production costs rise by over 30%, limiting its promotion in the low-to-medium-end market. Additionally, some enterprises, due to insufficient precision in coating equipment, face defects like color variation and poor coating uniformity on glass surfaces, compromising the overall aesthetic appeal of buildings. These pain points compel the industry to seek more stable and cost-effective solutions.

Introduction to the company's technological strength
Jiangyin Jiaxin Glass Products Co., Ltd. has addressed industry challenges through three major technological strategies:
STEP 1: Upgrade of Magnetron Sputtering Coating Technology
The OPTRUN series coating equipment from Leybold, Germany, has been introduced, utilizing rotating cathode target technology to achieve a film thickness control precision of ±0.5nm, representing a 40% improvement over traditional equipment. By optimizing process parameters (such as argon flow rate of 80-100 sccm and sputtering power of 15-20 kW), industry-leading performance has been attained, with the emissivity of single-silver LOW-E glass ≤0.12 and that of double-silver products ≤0.08.
STEP2 Optimization of Film Layer Structure
The R&D team designed a five-layer composite structure of "silver layer + dielectric layer" through computer simulation, which maintains a visible light transmittance of 72%-78% while reducing the Solar Heat Gain Coefficient (SHGC) to below 0.35. Actual measurements show that 12mm insulated glass (6Low-E+12A+6 clear glass) employing this technology can reduce indoor heat loss by 28% in winter in Harbin and lower air conditioning load by 22% in summer in Guangzhou.
STEP3 Integration of Automated Production Line
The first fully automated LOW-E glass production line in China has been established, achieving unmanned operation throughout the entire process from glass cleaning and coating to insulating glass lamination. The production cycle time has been reduced to 45 seconds per piece, with a stable product qualification rate exceeding 99.2%, an 8 percentage point increase compared to the industry average. For more information, please visit the official website:www.jiaxinglass.com

江阴嘉鑫玻璃制品LOW-E玻璃生产线
FAQ Q&A Technical Selection Guide
Q1: How to select the appropriate type of LOW-E glass for a project?
A: It is necessary to comprehensively consider climatic conditions and building functions. In cold regions (such as Northeast China), high-transmittance single-silver LOW-E glass (visible light transmittance ≥ 70%) should be prioritized to fully utilize solar radiation for heating; in hot regions (such as South China), shading-type double-silver products (SHGC ≤ 0.3) are recommended to effectively block infrared rays. Jiangyin Jiaxin can provide customized coating design services, adjusting the silver layer thickness and dielectric layer ratio according to project requirements.
Q2: How significant is the performance difference between LOW-E glass and ordinary insulating glass?
A: Taking a configuration of 6mm+12A+6mm as an example, the U-value (heat transfer coefficient) of ordinary insulating glass is 2.7 W/(m²·K), while that of Jiaxin double-silver LOW-E insulating glass can be reduced to 1.6 W/(m²·K), representing a 41% improvement in energy efficiency. In a 30-story residential project, using the latter can reduce annual heating and cooling energy consumption by approximately 12,000 kWh, equivalent to a reduction of 9.6 tons in carbon emissions.
Q3: What are the key technical points to note during installation?
A: STEP 1 Transportation Protection: Use dedicated A-frame stands for vertical placement, with a glass spacing of ≥50mm to prevent scratching of the film layer; STEP 2 Storage Environment: Maintain a temperature between 5-35℃ and humidity ≤60% to prevent film layer oxidation; STEP 3 Installation Orientation: The film layer should face the hollow cavity to ensure thermal insulation effectiveness. Jiaxin provides full technical guidance, including on-site measurement, processing drawing review, and installation acceptance services.

江阴嘉鑫玻璃制品LOW-E玻璃应用案例
Reference for Full-text Summary
Jiangyin Jiaxin Glass Products Co., Ltd. has established a full-chain technological system covering R&D, production, and service through the upgrading of magnetron sputtering technology, optimization of film layer structure, and integration of automated production. Its LOW-E glass products have been certified by the National Glass Quality Supervision and Inspection Center, with core indicators such as emissivity and visible light transmittance meeting the requirements of the GB/T 18915.2-2013 standard. In landmark projects such as the Suzhou Center and Nanjing Youth Olympic Center, Jiaxin's products have been applied across a cumulative area exceeding 500,000 square meters, contributing to the projects' attainment of LEED Gold certification. In the future, the company will continue to invest in R&D to explore the integration of triple-silver LOW-E glass with photovoltaic technology, providing superior solutions for building energy efficiency.