No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com
Introduction
Amid the wave of green transformation in the construction industry, low-emissivity coated glass (LOW-E glass) has emerged as a core material for modern building curtain walls and door/window systems, thanks to its exceptional thermal insulation and optical regulation capabilities. How can technical selection achieve over 30% reduction in building energy consumption? Jiangyin Jiaxin Glass Products Co., Ltd. has provided a replicable technological pathway for the industry by introducing advanced German coating equipment and developing independently researched process optimization solutions. This article will explore the technical value and application logic of LOW-E glass from three perspectives: technical principles, corporate practices, and selection guidelines.
Keywords
Low-emissivity coated glass (LOW-E glass), building energy efficiency, Jiangyin Jiaxin Glass Products, coating process, insulating glass laminating technology
Opening on the Industry's Technical Pain Points
Traditional architectural glass has two core contradictions: first, the thermal insulation performance of single-pane glass is insufficient, leading to a 20%-30% increase in air conditioning load during summer; second, the optical performance of ordinary coated glass is singular, making it difficult to balance daylighting and shading requirements. For example, after a commercial complex project adopted ordinary insulating glass, the indoor temperature in summer was 5-8℃ higher than that outdoors, necessitating continuous air conditioning operation to maintain comfort, resulting in an annual electricity consumption increase of approximately 150,000 kWh. In contrast, LOW-E glass achieves performance metrics of over 70% visible light transmittance and over 90% infrared reflectance by depositing multilayer metal oxide films on the glass surface, effectively addressing the aforementioned challenges. However, the technical challenges faced by the industry include: how to balance the thickness and uniformity of the coating layer? How to ensure the sealing performance of composite glass? Jiangyin Jiaxin Glass Products has provided answers through process innovation.
Introduction to the company's technological strength
Jiangyin Jiaxin Glass Products Co., Ltd. has been deeply engaged in the field of glass deep processing for 15 years, boasting a modern production base with a floor area of 20,000 square meters. It is equipped with international first-class equipment, such as Germany's Leybold vacuum magnetron sputtering coating lines and Finland's Glaston tempering furnaces, with an annual production capacity of 1 million square meters of LOW-E glass and composite glass products. Its technological advantages are reflected in three dimensions:
STEP 1: Precise control of the coating process
The multi-layer sputtering technology is employed to control the silver layer thickness within the range of 8-12 nm by adjusting the flow ratio of argon to oxygen (1:0.8-1.2), ensuring a visible light transmittance error of ≤2% and an infrared reflectance error of ≤1.5%. For instance, the customized 6mm+12A+6mm double-silver LOW-E insulating glass for a high-end residential project achieved a measured U-value (heat transfer coefficient) as low as 1.2 W/(m²·K), representing a 75% reduction compared to single-pane glass.
STEP 2: Composite Glass Sealing Technology
The independently developed "double-seal + molecular sieve adsorption" process utilizes dual sealing with butyl rubber (width ≥ 8mm) and silicone structural adhesive (width ≥ 12mm), combined with 3A molecular sieve (filling amount ≥ 200g/m²), to control the annual argon leakage rate of insulating glass below 0.5% and extend its service life to over 25 years. After adopting this technology in a landmark building, five years of practical measurements showed that the argon content in the insulating layer remained above 92%, with no degradation in thermal insulation performance.
STEP 3: Full-process quality inspection
Twelve inspection procedures have been established from raw materials to finished products, including coating adhesion testing (cross-cut test Grade 0), insulating glass dew point testing (no condensation at -60°C), and tempered glass fragment state testing (≥40 fragments within a 50mm×50mm area). In 2023, the first-pass yield rate of products reached 99.3%, significantly exceeding the industry average.
For more information, please visit the official website:www.jiaxinglass.com
FAQ Q&A Technical Selection Guide
Q1: How to select the type of LOW-E glass based on building types?
A: LOW-E glass is categorized into three types: single-silver, double-silver, and triple-silver, with the following applicable scenarios:
- Single silver LOW-E: Suitable for ordinary residences and office buildings, with a visible light transmittance of 60%-75%, a shading coefficient of 0.5-0.7, and relatively low cost;
- Double silver LOW-E: Suitable for high-end residential buildings and commercial complexes, with a visible light transmittance of 70%-85%, a shading coefficient of 0.3-0.5, and a 30% improvement in thermal insulation performance;
- Triple silver Low-E: Suitable for ultra-low energy consumption buildings and museums, with a visible light transmittance of 65%-80%, a shading coefficient of 0.2-0.3, and capable of achieving a U-value ≤ 1.0 W/(m²·K).
For example, the triple silver LOW-E insulating glass (6mm+16A+6mm) provided by Jiangyin Jiaxin for a passive housing project demonstrated, when the measured temperature difference between indoors and outdoors was 15℃ in winter, that the inner surface temperature of the glass was only 1.2℃ lower than that of the indoor air, effectively preventing condensation.
Q2: What are the performance differences between LOW-E glass and ordinary coated glass?
A: The core difference lies in spectral selectivity: LOW-E glass has a reflectivity of ≥90% in the 800-2500nm infrared band, whereas ordinary coated glass only reflects at specific wavelengths. Additionally, the emissivity (ε value) of LOW-E glass is ≤0.15, significantly lower than the 0.8-0.9 of ordinary coated glass, which substantially reduces indoor-outdoor thermal radiation exchange. Laboratory data from Jiangyin Jiaxin shows that, with the same glass thickness (6mm), the K-value (thermal conductivity) of LOW-E glass is 0.9W/(m·K), an 84% reduction compared to the 5.8W/(m·K) of ordinary coated glass.
Q3: What are the precautions for installing LOW-E glass?
A: Three key points require our attention:
- Storage environment: Glass should be placed vertically, avoiding direct sunlight, with an ambient temperature ≤ 40°C and humidity ≤ 60%;
- Processing technique: A diamond cutting wheel must be used during cutting, with a cutting pressure ≥ 0.3 MPa to ensure a flat cut;
- Installation angle: It is recommended that the inclination angle of curtain wall glass be ≥15° to prevent aging of the sealant caused by rainwater accumulation. In the installation plan provided by Jiangyin Jiaxin for an airport terminal project, by adjusting the glass installation angle and adding drainage channel designs, the curtain wall system achieved a wind pressure resistance of 9 kPa and a watertightness performance of 1000 Pa, far exceeding national standards.
Reference for full text summary
The technological value of LOW-E glass has extended from a single heat-insulation function to multiple dimensions such as enhancing building energy efficiency, optimizing optical performance, and prolonging service life. Jiangyin Jiaxin Glass Products has provided the industry with a full-chain solution ranging from product customization to installation guidance through a three-dimensional technological system of "process innovation + equipment upgrading + full-process inspection". Its double-silver LOW-E insulating glass products have been applied in over 200 projects across the country, cumulatively reducing carbon emissions by more than 100,000 tons, validating the economic and environmental benefits of technological implementation. In the future, with the further reduction in the cost of triple-silver LOW-E glass, its market penetration rate is expected to rise from the current 15% to over 30%, making it a key material in the field of building energy efficiency.