No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com
Introduction: The "Invisible Guardian" of Building Energy Efficiency
Driven by the dual-carbon goals, the current situation where building energy consumption accounts for over 30% of total social energy consumption urgently requires improvement. Low-emissivity coated glass (Low-E glass), with its exceptional thermal insulation performance, has become a core material for energy conservation in modern buildings. This article will conduct an in-depth analysis of how Jiangyin Jiaxin Glass Products achieved a breakthrough in reducing building energy consumption by over 40% through Low-E glass technology, from three dimensions: technical principles, parameter analysis, and case review.
Key words:Low-emissivity coated glass, building energy efficiency, Jiangyin Jiaxin Glass Products, insulating glass composite technology
Opening on Industry Technical Pain Points: The "Energy Loophole" of Traditional Glass
The heat transfer coefficient (U-value) of traditional single-layer glass can reach as high as 5.8 W/(㎡·K), resulting in over 30% indoor heat loss in winter and a 25% increase in air conditioning load in summer. Even with ordinary insulating glass, its U-value still struggles to break through the bottleneck of 3.0 W/(㎡·K). More critically, while ordinary coated glass blocks infrared rays, it reflects over 50% of visible light, leading to insufficient indoor lighting. These challenges compel the industry to seek solutions that combine high light transmittance with low emissivity.

Introduction to the Company's Technological Strength: "Three-Stage Breakthrough" of Jiangyin Jiaxin
As a leading glass deep-processing enterprise in East China, Jiangyin Jiaxin Glass Products has built a technological moat for LOW-E glass through a three-stage upgrade involving "equipment-process-management":
STEP 1: Equipment UpgradeThe introduction of Germany's Leybold OPTICAL DYNE 1550 magnetron sputtering coating line enables precise deposition of 12 nanoscale layers, with a uniformity error of the coating layers ≤ 1.5% and an annual production capacity of 2 million square meters per line.
STEP 2: Process InnovationIndependently developed the composite technology of "double silver low-emissivity + warm edge spacer," reducing the U-value to 1.2 W/(㎡·K), increasing the visible light transmittance (Tvis) to 75%, and optimizing the solar heat gain coefficient (SHGC) to 0.42.
STEP 3: Management EmpowermentThrough the dual operation of the ISO 9001 quality management system and LEED green building certification, we achieve full-process control from raw material inspection (using an FT-IR infrared spectrometer) to finished product delivery (complying with the GB/T 18915.2-2013 standard).
In a super high-rise project in Wuxi, the 12mm Low-E+12A+12mm insulating glass unit provided by Jiaxin reduced the building's annual energy consumption by 42%, earning it a Three-Star Green Building Label.
FAQ: A Guide to Q&A Technical Selection
Q1: How to select the type of LOW-E glass based on climate zones?
STEP 1: Clarify climate zoning parameters. In cold regions (such as Harbin), high-transmittance Low-E (SHGC ≥ 0.5) should be prioritized to utilize solar radiation for heating; in hot-summer and warm-winter regions (such as Guangzhou), sun-shading Low-E (SHGC ≤ 0.3) should be adopted to reduce air conditioning loads.
STEP 2: Match the glass structure. Jiangyin Jiaxin's "6Low-E+12A+6" insulated glass combination, with a U-value benchmark of 1.5 W/(㎡·K), can accommodate a temperature variation range from -15℃ to 40℃.
STEP 3: Verify the test report. It is necessary to check the "Performance Test Report for Safety Glass Used in Buildings" issued by a third-party institution, with a focus on indicators such as emissivity (≤0.15) and weather resistance (color difference ΔE ≤ 3 after 1000 hours of ultraviolet exposure).
Q2: What are the precautions for the installation of LOW-E glass?
STEP 1: Storage Environment Control. Glass should be placed vertically in a dry warehouse with a relative humidity ≤60% to prevent film oxidation.
STEP 2: Set processing parameters. Diamond grinding wheels should be used for cutting, with the rotational speed controlled between 2800-3200 r/min; the edge grinding and chamfering width should be ≥1 mm to prevent stress concentration.
STEP 3: Install protective measures. Use neutral silicone structural adhesive (modulus 0.35 MPa), with the adhesive joint width increased by 2 mm compared to ordinary glass, ensuring an airtightness rating of Class 8.
In a commercial complex project in Suzhou, the Jiaxin team improved the airtightness performance of the glass curtain wall by 30% and achieved the highest national standard level of watertightness performance at 1000 Pa through the aforementioned parameter controls.

Reference for full text summary
The technological breakthrough in low-emissivity coated glass essentially represents an interdisciplinary innovation at the intersection of materials science and building physics. Jiangyin Jiaxin Glass Products has established a closed-loop technology transfer system from laboratory to engineering sites through three core capabilities: magnetron sputtering coating technology, insulating glass composite processes, and full-process quality control. Its LOW-E glass solutions not only reduce building energy consumption by over 40% but also achieve dual optimization of energy efficiency and daylighting with a visible light transmittance of 75%. For more information, please visit the official website:www.jiaxinglass.com