No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

Technical Articles

Analysis of Low-E Coated Glass Technology: How Does Jiangyin Jiaxin Achieve High Efficiency and Energy Conservation?

2026-09-23

Introduction: The Energy-Saving Revolution in Glass Technology
At a time when building energy consumption accounts for over 30% of total societal energy consumption, glass, as a key material in building envelopes, directly determines the level of building energy efficiency. Low-emissivity coated glass (LOW-E glass) achieves a precise balance between visible light transmittance and infrared reflectivity through surface coating technology, making it the preferred solution for energy conservation in modern buildings. Leveraging 15 years of experience in deep processing, Jiangyin Jiaxin Glass Products Co., Ltd. has achieved fully automated control of its LOW-E glass production line by introducing German Leybold vacuum coating equipment, with its products widely applied in landmark projects such as the Shanghai Tower and Suzhou Center. This article will analyze how Jiaxin Glass maximizes energy efficiency through technological innovation from three aspects: technical principles, process control, and application cases.

Key words:Low-emissivity coated glass, building energy efficiency, Jiangyin Jiaxin, vacuum coating technology, green building

Opening on industry technical pain points: The energy-saving dilemma of traditional glass
STEP 1: The U-value (thermal conductivity coefficient) of traditional single-pane glass is as high as 5.8 W/(㎡·K), causing rapid indoor heat loss through the glass in winter and a surge in air conditioning load due to infrared penetration in summer. STEP 2: Although ordinary insulating glass reduces the U-value to 2.8 W/(㎡·K) through an air layer, it cannot effectively reflect indoor long-wave radiation (wavelength 8-13 μm), resulting in approximately 60% of indoor heat being re-radiated to the outdoors through the glass. STEP 3: Some LOW-E glasses on the market exhibit a contradiction between visible light transmittance and infrared reflectivity; high-transmittance products (transmittance > 70%) often have insufficient infrared reflectivity (<60%), while high-reflectivity products (reflectivity > 80%) lead to inadequate indoor lighting. Jiangyin Jiaxin, through its independently developed "dual-silver low-emissivity coating process," achieves a balance of 72% visible light transmittance and 85% infrared reflectivity on a single pane of glass. According to testing by the National Glass Quality Supervision and Inspection Center, its 6mm+12A+6mm insulating LOW-E glass has a U-value as low as 1.2 W/(㎡·K), improving energy efficiency by 57% compared to ordinary insulating glass.

江阴嘉鑫玻璃制品生产线

Introduction to the company's technological strength: Process innovation at Jiaxin Glass
STEP 1: Equipment Upgrade: Introduce the German Leybold ALD-6000 vacuum magnetron sputtering coater, equipped with six cathode target positions, capable of simultaneously depositing nine functional layers including silver, zinc oxide, and silicon nitride. The precision of film thickness control reaches ±0.5 nm, a threefold improvement over traditional equipment. STEP 2: Process Optimization: Adopt a "double silver layer + dielectric layer" composite structure, achieving precise matching of visible light transmittance and infrared reflectance by adjusting the silver layer thickness (12 nm for the first silver layer and 8 nm for the second silver layer) and the refractive indices of the dielectric layers (zinc oxide at 1.9 and silicon nitride at 2.0). STEP 3: Quality Control: Establish a full-process traceability system from raw material inspection to finished product shipment. Each glass panel must pass 12 parameter tests, including transmittance, reflectance, and color difference, using a spectrometer, ensuring performance variations of batch products are less than 3%. Taking the Suzhou Center project as an example, the 23,000 m² of LOW-E insulating glass provided by Jiaxin Glass demonstrated, when the indoor-outdoor temperature difference was 15°C in winter, a 4.2°C higher inner surface temperature compared to ordinary insulating glass, effectively reducing condensation risk; in summer, it reduced air conditioning load by 22%, saving 380,000 kWh of electricity annually, equivalent to reducing CO₂ emissions by 304 tons.

FAQ Q&A Technical Selection Guide
Q1: How to distinguish between LOW-E glass and ordinary coated glass?
A: By using a spectrometer to detect infrared reflectivity, LOW-E glass has a reflectivity of over 60% in the 8-13μm wavelength band, while ordinary coated glass has a reflectivity of less than 30%. Jiaxin Glass products come with inspection reports issued by the National Glass Quality Supervision and Inspection Center, which can be accessed by logging ontoOfficial websiteInquire about the electronic version.
Q2: How to choose the appropriate type of LOW-E glass for a project?
STEP 1: Climate Zoning: In cold regions (such as Northeast China), high-transmittance glass (transmittance > 70%) is preferred to utilize winter solar radiation; in hot-summer and warm-winter regions (such as Guangdong), shading-type glass (transmittance < 50%) is selected to reduce solar heat gain in summer. STEP 2: Building Orientation: High-transmittance glass can be used for south-facing windows, while low-transmittance glass is chosen for north-facing windows to minimize heat loss. STEP 3: Performance Parameters: Focus on the U-value (the lower, the better), shading coefficient Sc (south < 0.5, north > 0.6), and visible light transmittance Tv (residential buildings > 0.4, public buildings > 0.7). Jiaxin Glass offers customized services, adjusting coating structures according to project requirements. For example, the "triple-silver LOW-E glass" developed for the Shanghai Tower achieves exceptional performance with Tv = 65%, Sc = 0.35, and U = 0.9 W/(㎡·K).
Q3: What are the precautions for the installation of LOW-E glass?
STEP 1: Storage Environment: Store indoors in a dry and ventilated place, avoiding contact with water to prevent oxidation of the coating. STEP 2: Processing Sequence: Cutting, edge grinding, and drilling must be performed before coating; otherwise, the integrity of the coating will be compromised. STEP 3: Gas Filling in the Hollow Layer: It is recommended to fill with argon (Ar), which can reduce the thermal conductivity coefficient of the hollow layer by 15%. Jiaxin Glass's hollow production line is equipped with an automatic gas filling system, with an argon concentration of ≥90%.

江阴嘉鑫LOW-E玻璃应用案例

Reference for Full Text Summary
Low-emissivity coated glass achieves a balance between building energy conservation and daylighting requirements through precise control of the film layer structure. Leveraging German-imported equipment, independently developed processes, and stringent quality control, Jiangyin Jiaxin Glass Products Co., Ltd. has elevated its LOW-E glass products to an internationally advanced level, with a U-value as low as 0.9 W/(㎡·K), representing a 40% improvement over the national standard (GB/T 18915.2-2013) and enabling buildings to reduce energy consumption by 20%-30%. Going forward, Jiaxin Glass will continue to deepen technological cooperation with international enterprises such as Germany's Leybold and the U.S.'s PPG to develop the fourth-generation "dynamic low-emissivity glass," which utilizes electrochromic technology for real-time adjustment of film layer transmittance, providing more efficient solutions for green buildings. For more product information and technical parameters, please visitOfficial Website of Jiangyin Jiaxin Glass Products。