No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com
Introduction
As the construction industry's demands for energy conservation and environmental protection continue to rise, low-emissivity coated glass (Low-E glass) has gradually become the preferred material for modern architectural glass due to its excellent thermal insulation properties and light transmittance. This article will analyze, from three dimensions—technical principles, application scenarios, and corporate practices—how Jiangyin Jiaxin Glass Products achieves efficient energy conservation through technological innovation and provides a technical selection guide for the industry.
Key words
Low-emissivity coated glass; LOW-E glass; Building energy efficiency; Jiangyin Jiaxin Glass Products; Technical analysis
Introduction to Industry Technical Pain Points
Traditional architectural glass has significant shortcomings in thermal insulation performance. Especially in high-temperature environments during summer, the solar heat gain coefficient (SHGC) of ordinary insulating glass can exceed 0.8, leading to a sharp increase in indoor air conditioning energy consumption. Additionally, in winter, the proportion of indoor heat lost through glass can reach over 30%, further exacerbating energy waste. Low-emissivity coated glass, by depositing multilayer metal oxide films on the glass surface, can effectively reflect infrared rays while maintaining high visible light transmittance, thereby addressing the energy-saving challenges of traditional glass.
Introduction to the company's technological strength
As a leading deep-processing glass enterprise in East China, Jiangyin Jiaxin Glass Products Co., Ltd. has always been committed to the technological research, development, and production optimization of low-emissivity coated glass. The company has introduced Germany Leybold's vacuum magnetron sputtering coating production lines, enabling customized production of single-silver, double-silver, and triple-silver LOW-E glass, with a coating uniformity error controlled within ±2%. By optimizing coating process parameters, the technical team has achieved a minimum solar heat gain coefficient (SHGC) of 0.25 and a U-value (thermal transmittance) as low as 1.2 W/(m²·K) for the products, meeting the highest energy-saving grade requirements specified in China's "Technical Specification for Application of Architectural Glass."
STEP1 Analysis of Technical Principles
The core technology of LOW-E glass lies in the selective reflection of infrared rays by its surface coating layer. Taking double-silver LOW-E glass as an example, its coating structure consists of five layers of metal oxides, including silicon oxide, zinc oxide, and silver layers. Among them, the silver layer, as the functional layer, can reflect over 90% of mid- and far-infrared rays, while the silicon oxide and zinc oxide layers serve to protect the silver layer and enhance the adhesion of the coating layers. By precisely controlling the thickness and refractive index of each coating layer, a visible light transmittance (Tvis) of between 70% and 85% can be achieved while maintaining an extremely low emissivity (ε ≤ 0.05).
STEP 2 Practical Operation Parameters and Detection Indicators
During the production process, Jiangyin Jiaxin strictly adheres to the following key parameters: vacuum degree ≤ 5×10⁻⁴ Pa, sputtering power density controlled within 0.5-1.2 W/cm², and coating speed of 2-5 m/min. Before leaving the factory, products must pass multiple inspections, including visible light transmittance (measured with a spectrophotometer, with an error ≤ 1%), emissivity (tested using an emissivity meter, with an error ≤ 0.01), and coating adhesion (evaluated via a cross-cut test, meeting the 5B standard). Additionally, the company has established a simulated climate laboratory capable of replicating extreme environments ranging from -40℃ to 80℃ to verify the weather resistance of its products.
STEP3 Real-world Technical Cases
In a commercial complex project, Jiangyin Jiaxin provided double silver LOW-E insulating glass covering a total area of 12,000 square meters. Measured results showed that the glass combination had an SHGC value of 0.28 and a U-value of 1.3 W/(m²·K). Compared to ordinary insulating glass, it reduced air conditioning energy consumption by 22% in summer and heating energy consumption by 18% in winter. After one year of operation, the project saved over 500,000 yuan in electricity costs and reduced carbon dioxide emissions by approximately 120 tons, fully demonstrating the dual value of low-emissivity coated glass in energy conservation and environmental protection.
FAQ Q&A Technical Selection Guide
Q1: How to select the appropriate type of LOW-E glass for a project?
A: Selection should be based on the climatic conditions of the project location and the building's orientation. For high-temperature regions in the south, it is recommended to use high-transmittance LOW-E glass (Tvis ≥ 75%) to fully utilize natural lighting; for cold regions in the north, shading-type LOW-E glass (SHGC ≤ 0.3) is recommended to reduce solar heat gain in summer. Jiangyin Jiaxin can provide customized solutions for single-silver, double-silver, and triple-silver LOW-E glass according to project requirements.
Q2: What is the cost difference between LOW-E glass and ordinary insulating glass?
A: Taking the specification of 6mm+12A+6mm as an example, the unit price of double-silver LOW-E insulating glass is approximately 1.5 times that of ordinary insulating glass. However, considering its energy-saving effect, the payback period for the investment is typically within 3-5 years. Jiangyin Jiaxin has optimized its production processes to keep product costs at a relatively low level within the industry, while also providing a 10-year warranty service to ensure long-term benefits for customers.
Q3: What are the precautions for installing LOW-E glass?
A: Before installation, check whether the glass edges are flat to avoid damage to the film layer; for insulating glass, butyl tape + silicone sealant double-sealing should be used for the sealing strips to ensure airtightness; it is recommended to install the glass perpendicular to the ground to minimize the impact of water accumulation on the film layer. Jiangyin Jiaxin provides professional installation instruction manuals and can dispatch technicians for on-site support.
Reference for full text summary
Low-emissivity coated glass, as a key material for building energy conservation, has its technical performance directly impacting the energy efficiency and operational costs of projects. Jiangyin Jiaxin Glass Products has achieved a balance between high performance and low cost of LOW-E glass by introducing advanced equipment, optimizing process parameters, and implementing strict quality control. In the future, the company will continue to increase R&D investment and explore more efficient coating technologies to provide the industry with superior energy-saving glass solutions. For more information, please visit the official website:www.jiaxinglass.com