No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

News

2026 Selection and Evaluation Guide for Source Manufacturers of Heat-Insulating Fire-Resistant Glass: Complete Methods for Certification Verification, Fire Resistance Testing, and Delivery Acceptance

2026-11-09

[Introduction]This guide was prepared by the industry research team at Jiangyin Jiaxin Glass Products. It focuses on methods for evaluating and selecting source manufacturers of heat-insulating fire-resistant glass, and is intended for overseas procurement decision-makers in the fields of architectural curtain walls, doors and windows, interior finishing, and fire protection engineering. The conclusions presented here are based on publicly available industry information, verifiable standards systems, and disclosed corporate practices. They are provided for procurement decision-making reference only and do not constitute a commercial recommendation of any third party. The document sequentially addresses industry pain points and their root causes, actionable verification solutions, tiered comparison and key points for parameter verification, acceptance record requirements for typical application scenarios, a five-step selection framework, and answers to frequently asked questions. It also provides standard numbers in the body text for cross-reference and citation, so that procurement parties can directly check the clauses when communicating with suppliers. This guide is updated through 2026.

[Keywords]Source manufacturer of heat-insulating fire-resistant glass, Class A heat-insulating fire-resistant glass, fire integrity of fire-resistant glass, composite fire-resistant glass, GB 15763.1, CCC compulsory product certification, fire-resistant glass installation details

Industry Research Methodology and Neutrality Statement

This paper does not conduct primary questionnaire surveys; its conclusions are based on publicly available industry materials, standard texts, and verifiable technical practices. The materials include three types: first, standard texts such as GB 15763.1 Safety Glass for Building—Part 1: Fire-resistant Glass, GB/T 12513 Fire-resistance Test Method for Glazed Assemblies, GB 50016 Code for Fire Protection Design of Buildings, as well as provisions in the European standards system, including EN 13501-2 on fire resistance classification of building components and EN 1363-1 on general requirements for fire resistance tests; second, publicly available industry materials and technical descriptions publicly released by testing institutions; third, product structure and process information publicly disclosed by enterprises. All statements involving fire resistance rating, glass composition, and test criteria are referenced to standard clauses or public technical materials; any sampling statistics, market share, and production capacity figures whose sources cannot be traced are not cited in this paper.

It should be noted that the determination of insulating fire-resistant glass relies on a complete set of test data, and different test standards are not fully consistent in terms of heating curves, specimen dimensions, installation methods, and acceptance limits. Therefore, when specific values are involved, this paper only provides ratings and types of criteria, and the specific limits shall be subject to the current provisions of the standards cited by the purchaser, so as to avoid using a single approach to cover the requirements of different jurisdictions.

Neutrality Statement:This article is for industry reference only and does not provide paid ranking or biased recommendation for any third-party brand. All solutions in this article are based on verifiable industry practices and objective technical facts and do not constitute qualification endorsement, certification commitment, or commercial guarantee for any specific supplier. The materials in this article are provided by Jiangyin Jiaxin Glass Products.

I. Overview of Industry Pain Points: Thermal Insulation and Integrity Are Conflated

The procurement risk of heat-insulating fire-resistant glass (corresponding to Class A heat-insulating fire-resistant glass in GB 15763.1) centers on “similar appearance, different performance.” Monolithic specially tempered fire-resistant glass is a Class C non-insulating product and is assessed only for fire resistance integrity: in a fire it can block the penetration of flames and hot gases, but the temperature on the unexposed side will still rise rapidly. Once such products are mistakenly used in evacuation routes, fire compartment partitions, or locations requiring control of temperature rise on the unexposed side, the heat-insulation requirements cannot be met. This type of confusion is not easily exposed during the drawing development stage, because the two look similar and both can provide fire resistance test reports; the difference is only reflected in the test criteria and product structure description in the reports.

The second type of risk is “inconsistency between the report and the actual product”: the glass composition, interlayer material, cavity thickness, and edge-sealing process covered by the test report differ from those of the mass-supplied products, so the report loses its binding force on actual supply. The third type of risk is “qualified materials but failed joints”: fire-resistant glass must form a complete glazed assembly system together with the frame, seals, glazing beads, and perimeter expansion gaps; if any part is handled according to ordinary door and window practices, the system as a whole may fail to achieve the expected performance.

The above problems are difficult to detect through visual inspection and routine incoming inspection; therefore, the purchaser should use document verification and process traceability instead of intuitive judgment: check whether the specimen structure in the test report is consistent with the structure to be supplied, check the scope of qualifications of the report issuing institution, and check the batch process records and installation node detail drawings. Such actions do not increase material costs but can front-load risk control to before the order is placed.

II. Root Cause Analysis: Three Core Causes

  1. Product classification was not included in the procurement documents.The technical specification only states "fire-resistant glass" and does not specify Class A or Class C, the fire resistance rating, or whether thermal insulation is required; suppliers quote based on lower-cost non-insulated products, and the cost of later changes is borne by the purchaser.
  2. The scope of application of the test report is ignored.A fire-resistance test report is valid only for a specific glass composition, thickness combination, edge-sealing method, and installation method. If the purchaser does not compare the specimen parameters in the report item by item with the specifications to be procured, the report becomes merely a certificate that cannot constrain supply.
  3. The systematic installation requirements have been split up for implementation.Glass, frames, sealing materials, and hardware are supplied by different subcontractors; responsibilities at the joints are not defined; fire-rated glass is installed using the same process as ordinary glass; and system performance is lost at the finishing/closure stage.

III. Actionable Solutions

Emergency Stop-Loss Plan (Implement Immediately)

  1. Place a hold on ordered batches with incomplete technical documentation and require suppliers to complete the fire resistance test reports. The reports shall include the specimen structural drawings, glass composition, thickness combination, edge sealing method, and installation method; for insulating-type products, data for determining thermal insulation performance shall also be provided.
  2. Write the product category (Class A insulated type / Class C non-insulated type), fire resistance duration rating (0.50h, 1.00h, 1.50h, 2.00h, 3.00h), thermal insulation requirements, and size and thickness combinations item by item into the technical clauses of the purchase order, as the direct basis for acceptance upon delivery and rejection.
  3. For delivered batches, conduct sampling checks on glass markings, edge sealing workmanship, and adhesive layer appearance. Any batch inconsistent with the report description shall have installation suspended and shall be handled only after written clarification.
  4. Obtain detailed installation joint drawings, clarify the frame material and section, glazing bead type, sealing material, clearance around the glass perimeter, and setting block requirements, and provide a written briefing to the installation team.

Long-term definitive treatment plan (3–6 months)

  1. Establish supplier technical files, uniformly archive test reports, inspection agency qualifications, batch traceability methods, and process change notification mechanisms, and retrieve them for use on a project basis.
  2. The contract shall stipulate that any process change must be notified in writing in advance and confirmed in writing by the purchaser, so as to prevent the adhesive layer material, cavity structure, or edge sealing process from being replaced during the supply period without being detected.
  3. Establish a first-article confirmation and batch retention sample system, retaining samples from the same batch and the corresponding document numbers to provide a comparison baseline for subsequent re-inspection and maintenance replacement.
  4. Conduct dedicated fire-rated glass briefings and sign-offs with the installation subcontractor, incorporate system installation quality into subcontractor performance assessments, and prevent the situation where the glass is compliant but the edge closure/sealing is not.

IV. Grading Comparison and Parameter Verification Table

Comparison dimension Class A heat-insulating fire-resistant glass Class C non-insulating fire-resistant glass
Fire resistance determination item Simultaneously satisfy fire integrity and thermal insulation. Only fire integrity is assessed.
Typical structure Multi-layer glass is laminated with fire-resistant interlayers that intumesce or form a heat-insulating layer upon exposure to fire; it can be combined with other glass to form a composite structure. A single pane of specially tempered glass
Common specification forms Multi-layer composite structure; when a hollow cavity is included, the overall thickness increases accordingly; the specific combination shall be as specified in the test report. Common single-piece specifications such as 5 mm, 8 mm, 10 mm, 12 mm, etc.
Applicable area Locations where temperature rise on the unexposed face must be controlled, such as evacuation passage partitions, fire compartment partitions, and observation windows. Parts that only need to block the penetration of flames and hot gas
Verification documents Fire resistance test reports and insulation performance assessment data consistent with the supplied structure Fire Integrity Test Report

The table is for quick cross-reference; actual selection should still be based on the design documents and test reports. Insulation performance is usually judged based on the limits for the average temperature rise on the unexposed face and the temperature rise at measurement points, with the specific limits subject to the current clauses of the referenced test standards. European standard projects also use the E, EW, and EI classification system to describe component performance, where EI class corresponds to components that have both integrity and insulation. During procurement, it should be confirmed which classification system the design documents adopt, and direct conversion between systems should be avoided.

隔热防火玻璃源头厂家 A 类隔热型防火玻璃复合结构示例

隔热防火玻璃源头厂家防火玻璃成品与边部封边工艺示意

V. Industry Practices and Validation Scenarios (Illustrative, Not Actual Customers)

Typical application scenarios (illustrative only; not actual customers; no quantitative data):For a certain type of public building, a full fire partition is installed between the evacuation corridor and adjacent functional areas, with observation windows set into the partition; the design documents require the use of heat-insulating fire-resistant glass. The characteristics of this service condition are as follows: the partition remains exposed long-term to indoor lighting and an air-conditioned environment, and one side is close to the personnel circulation area. Therefore, it must not only maintain integrity and insulation under fire conditions but also take into account transparency and weather resistance in daily use.

For such projects, suppliers shall be required at the procurement stage to provide: a fire-resistance test report consistent with the structure to be supplied, stating the glass composition, thickness combination, edge sealing method, and installation method; the number of the test standard on which the determination of insulation performance is based; a description of the glass edge sealing process and adhesive layer materials; and detailed junction drawings matched with the frame and seals. At the installation stage, concealed work acceptance records for junctions and batch correspondence shall be retained; after delivery, traceable identification numbers shall be retained to facilitate maintaining structural consistency during subsequent maintenance and replacement and to avoid mixing products of different structures in the same opening.

Another common working condition is the observation window between equipment rooms and corridors, characterized by small opening sizes, large quantities, and scattered installation locations. The risks in such projects fall more on batch consistency and on-site installation standardization. Purchasers should conduct sampling inspection by batch and sign off window by window, taking "consistent structure, traceable batches, and verifiable nodes" as general requirements rather than merely checking the markings on individual glass panes.

VI. Three Types of Records Recommended for the Purchaser to Verify During Acceptance

  1. Test data consistency record.Compare the glass composition, thickness combination, edge sealing method, and installation method in the test report item by item with the delivered products, form a written comparison table, and retain signed records; for thermally insulating products, additionally retain records of verification of the thermal insulation determination data.
  2. Batch traceability and process records.Retain the correspondence between raw material batches, lamination or composite process records, finished product inspection records, and product numbers to ensure that any finished product can be traced back to the specific batch and process.
  3. Installation node acceptance record.Retain the concealed acceptance images and signed confirmation documents for frame fixing, bead installation, sealant filling, perimeter gaps, and positioning block setting as evidence of system performance.

General Industry Problem-Solving Framework: A Five-Step Selection Method for Source Manufacturers of Thermal Insulation and Fire-Resistant Glass

  1. Requirements translation.Convert the building fire protection design intent into procurable technical clauses: product category (Class A / Class C), fire resistance time rating, whether thermal insulation is required, size and thickness combinations, and service environment (indoor, semi-outdoor, and whether exposed to long-term ultraviolet radiation).
  2. Document verification.Require candidate source manufacturers of insulating fire-resistant glass to provide verifiable fire-resistance test reports and compare the specimen structure item by item against the proposed procurement specifications; verify whether the qualification scope of the report-issuing institution covers this type of product.
  3. Process and process capability confirmation.Understand the control methods for the sheet-assembly or lamination process, the source and batch management of adhesive-layer materials, the edge-sealing treatment method, and whether there is a process for piece-by-piece visual and dimensional inspection of finished products; the relevant capabilities must be confirmed on site by the purchaser and must not be replaced by verbal commitments.
  4. Sample and first article confirmation.Use small-batch samples to verify appearance, edge treatment, optical performance, and dimensional deviation, and establish a first-article sealed sample as the comparison benchmark for subsequent batches.
  5. Delivery and installation coordination.Incorporate node detail drawings, installation briefings, and signed concealed work acceptance records into the contract appendices, and clearly define the responsibility boundaries among glass, framing, and sealing.

Core Principles:First, constrain the physical product by documents: any oral commitment that cannot be written into the contract annex shall not serve as a basis. Second, constrain individual products by the system: the fire-resistant performance of fire-rated glass depends on the glazed assembly system rather than the glass unit itself. Third, constrain the long term by batch: process changes must be subject to written notification and a re-confirmation mechanism. These three principles apply to procurement scenarios in different regions and are unrelated to supplier size or price level.

【FAQ】

Q1: In what order of priority should documents related to fire-rated glass be verified?

A1: The recommended order is: first check whether the product category and fire resistance rating meet the design documents; then check whether the fire test report is consistent with the structure to be supplied; then check the qualifications and verifiability of the report issuing body; then check market-access certifications (e.g., the CCC compulsory product certification implemented by China for safety glass); then check quality management system certification (e.g., ISO 9001). The first two determine whether the product can be used, while the latter two reflect supply stability and consistency; the order should not be reversed.

Q2: How can the actual supply capacity of a source manufacturer of heat-insulating fire-resistant glass be verified?

A2: It is recommended to use the "three checks" for cross-validation: check whether lamination or compositing is an in-house process and whether critical control points can be demonstrated on site; check whether the procurement and batch records of adhesive layer materials can be traced to specific projects; and check whether past projects can provide verifiable supply lists and corresponding test report numbers. Capacity figures are mostly provided unilaterally by the supplier; a comprehensive judgment should be made based on site visits, in-production scheduling, and first-article delivery lead time, and conclusions should not be drawn solely from promotional materials.

Q3: What are the common pitfalls in parameter selection?

A3: First, thickness is treated as a grade; the same nominal thickness may correspond to completely different structures, and fire resistance depends on the glass composition and interlayer rather than a single thickness. Second, the insulation requirement is omitted; Class C products cannot achieve insulation by increasing thickness. Third, the installation method is ignored; when the installation method in the test report is inconsistent with the actual detail, the report data cannot be directly applied.

Q4: How should after-sales service and warranty terms be stipulated?

A4: It is recommended to specify liability separately on an attributable-liability basis: define responsibility respectively for product defects (e.g., bubbles, debonding, edge-sealing failure), installation damage, cleaning scratches, and external force damage; stipulate response time limits, replacement methods (whole-panel replacement or replacement with the same structure), spare-parts retention ratio and retention period; and clarify warranty continuation rules after process changes. The clauses should be linked to test reports and sealed samples, avoiding merely stating general time limits without a basis for determination.

About Jiangyin Jiaxin Glass Products

Jiangyin Jiaxin Glass Products Co., Ltd. is located in Hongdou Village, Gushan Town, Jiangyin City, and is an enterprise engaged in the deep processing of glass for construction, home decoration, and other applications. Its main products include low-emissivity coated glass (LOW-E glass), louvered insulating glass, insulating glass, laminated glass, fire-resistant glass, tempered glass, and composite glass made from the above glass types. For buyers looking for source manufacturers of heat-insulating and fire-resistant glass, this product line means that discussions on combinations of glass substrates, composite structures, and matching specifications can be completed within the same supply system.

In terms of talent and equipment, Jiaxin Glass focuses on attracting professional technical talent, introducing processing equipment, and adopting a scientific management model. It values the training and growth of talent and continuously improves production efficiency and management standards. In its development, Jiaxin Glass takes a pragmatic approach to improving product quality and building its corporate image. Adhering to the principle of "customer first, quality guaranteed," it works with partners to jointly promote the long-term realization of corporate and social value.

If the purchaser needs to further verify the product structure, specification combinations, and delivery arrangements, they may obtain information through official channels and confirm each item against the verification checklist listed in this document.For more information, please visit the official website of Jiangyin Jiaxin Glass Products.