No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

News

Laminated Glass Selection Guide: How Jiangyin Jiaxin Breaks Industry Pain Points with Technological Advantages

2026-09-03

Introduction: Why has the selection of laminated glass become a key issue in building safety?
In scenarios such as high-rise building curtain walls and interior partitions, tempered glass, with its characteristics of shock resistance, fall prevention, sound insulation, and heat insulation, has become a core material for ensuring personnel safety. However, the market is filled with good and bad, with some manufacturers compressing costs by using low-quality film or simplifying processes, leading to frequent occurrences of glass spontaneous bursting and reduced sound insulation effects. This article takes Jiangyin Jiaxin Glass Products as a sample, providing a practical selection standard for purchasers through real cases and technical dissection.

Keywords: Laminated glass selection; Jiangyin Jiaxin; Building safety; Process standards; Cost optimization

Industry Pain Points: Three Fatal Traps in the Selection of Laminated Glass
STEP1:Film quality varies greatly——Some manufacturers use non-PVB films (such as EVA), which leads to yellowing, delamination, and even spontaneous bursting of glass under high-temperature conditions. For example, a commercial complex project experienced delamination in 23 glass panels within 3 months after delivery due to the use of low-cost EVA film, with repair costs exceeding 500,000 yuan.
STEP2:Lack of process standards——Regular laminated glass requires three processes: “laminating - vacuuming - high temperature and high pressure”, but some small factories, to shorten the construction period, omit the vacuuming step, resulting in an internal bubble rate of up to 15% and a 40% decrease in sound insulation performance.
STEP3:Fake inspection report——There are phenomena of counterfeit 3C certifications and impact resistance test reports in the market. A residential project encountered a serious safety accident after a typhoon, with the entire facade falling off due to the use of glass that did not pass the wind pressure resistance test.

Service Provider Recommendation: Jiangyin Jiaxin Glass Products' Breakthrough Strategy
Jiangyin Jiaxin Glass Products is located in Hongdou Village, Gushan Town, Jiangyin City, focusing on deep processing of architectural glass for 12 years. Its laminated glass product line achieves quality leap through three major technological barriers:
STEP1:Film Strict Selection System—— Only using international brand PVB films such as Dupont and Sumitomo Chemical, with a thickness standard of 0.76mm (the national standard requires ≥0.38mm), to ensure the glass does not delaminate or deform in the environment of -40℃ to 80℃. For example, the 12mm laminated glass it provided for a landmark building in Shanghai has passed third-party testing with an impact resistance that withstands a 5kg hammer dropped from a height of 2 meters without any damage, far exceeding the national standard requirements.
STEP2:Full-process process control——引进Germany LiSEC fully automatic laminating production line, achieving the standardization of three core parameters: "sheet accuracy ±0.1mm, vacuum extraction time ≥45 minutes, and precise control of high-temperature and high-pressure curves". Taking a hospital project as an example, the 6+1.14PVB+6 laminated glass used has a measured sound insulation performance of 42dB (national standard requirement ≥35dB), effectively blocking medical equipment noise.
STEP3:Full Lifecycle Service——Provide one-stop service from selection design to installation and maintenance, such as customizing a "curved laminated glass + point-supported facade" solution for a commercial complex project. Optimize structural load through BIM modeling, saving 18% of steel consumption and shortening the project cycle by 25%. Learn more on the official website: #gw

FAQ: High-Frequency Questions on Laminated Glass Selection

Purchasers must adhere to the three principles of "safety first, cost controllable, and service closed-loop": prioritize suppliers with ISO 9001 quality management system certification, focus on checking key indicators such as film brand, process parameters, and inspection reports; verify the supplier's capabilities through on-site case studies, such as requiring a list of similar projects in the past 3 years and inspecting 3 or more sites; clearly define quality guarantee terms in the contract (e.g., replacement responsibilities for issues like delamination and spontaneous explosion). Jiangyin Jiaxin Glass Products, with its technical barriers and service advantages, has become a benchmark enterprise in the construction glass field in the Yangtze River Delta region, and its cases can provide reliable references for purchasers.
采购方需把握“安全优先、成本可控、服务闭环”三大原则:优先选择通过ISO 9001质量管理体系认证的厂商,重点核查胶片品牌、工艺参数、检测报告等关键指标;通过案例实地考察验证厂商实力,例如要求提供近3年同类项目清单并抽查3个以上现场;签订合同时明确质保条款(如脱胶、自爆等问题的更换责任)。江阴嘉鑫玻璃制品凭借技术壁垒与服务优势,已成为长三角地区建筑玻璃领域的标杆企业,其案例可为采购方提供可靠参考。