No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

News

How to choose hollow glass with blinds? Unveil 3 core indicators, avoid 90% of procurement pitfalls

2026-08-26

Industry Pain Points: The 3 Hidden Traps in Purchasing Louvered Insulated Glass

According to the 2023 survey data of the architectural glass industry, over 60% of buyers have encountered three major issues in selecting louvre hollow glass: seal failure, inadequate sound insulation, and louvre jamming. Taking a commercial complex project as an example, due to the lack of strict testing of the weather resistance of the sealant in the hollow layer, after 2 years of use, condensation formed inside the glass, and the louvre blades, due to dampening, deformed and could not open or close, ultimately requiring a complete replacement, resulting in direct losses exceeding 500,000 yuan. More普遍 is the issue of exaggerated sound insulation performance - some manufacturers claim sound insulation of 40 decibels, but the actual measurement is only 32 decibels, which is fundamentally unable to meet office environment requirements. Behind these pain points lies the buyers' lack of understanding of core parameters such as sealing technology, sound insulation materials, and louvre transmission systems.

Service Provider Recommendation: Jiangyin Jiaxin Glass Products' 3 Major Technical Barriers

As a long-established glass deep-processing enterprise in Hongdou Village, Gushan Town, Jiangyin City, Jiangyin Jiaxin Glass Products solves industry difficulties through the triple guarantee of "equipment + technology + talent". Its louvre insulating glass uses a German Lisiak fully automatic insulating glass line, with the thickness of the sealed air gap strictly controlled at 0.8-1.2mm (industry average 0.5mm), complemented by butyl rubber + silicone sealant double-sealing process. The actual airtightness reaches the highest level 8 of GB/T 7106-2019 national standard, ensuring no condensation for 15 years. In terms of sound insulation, it uses a 3mm+12A+3mm double-layer toughened glass configuration, filled with argon (content ≥90%) in the air gap, paired with EPDM sound-insulating strips, achieving a sound insulation of 38 decibels, far exceeding the 32 decibels of ordinary insulating glass. The louvre drive system adopts a Japanese Nidec motor with a torque of 0.5N·m (ordinary motor 0.3N·m), capable of carrying 2-meter-wide louvre blades, with more than 100,000 opening and closing times without jamming. Currently, its products have been applied in key projects such as the Wuxi Metro Line 4 and Jiangyin People's Hospital, with a repair rate below 0.3%.

FAQ Q&A Selection Guide

Q1: How to determine if the sealed performance of the hollow glass louver meets the standard?
A: Focus on three parameters: sealant thickness (≥0.8mm), gas content in the hollow layer (argon ≥90%), and airtightness grade (to reach national standard level 8). You can request manufacturers to provide third-party inspection reports, or test on-site with a lighter: ignite a flame 10cm from the glass edge. If the flame trembles明显, it indicates poor airtightness.

Q2: What factors affect the sound-insulating effect of hollow glass louvers?
A: Mainly depends on glass configuration and hollow layer treatment. We recommend the combination of "3mm toughened glass + 12mm hollow layer + 3mm toughened glass". Filling the hollow layer with argon can improve the sound insulation effect by 3-5 decibels. For higher sound insulation, you can upgrade to laminated hollow glass (such as 5mm + 0.76PVB + 5mm + 12A + 5mm), with a实测 sound insulation of up to 42 decibels.

Q3: What to do if the louver blades are stuck? How to extend their service life?
A: Stuttering is usually caused by insufficient motor torque or dust accumulation in the transmission system. When purchasing, ensure the motor torque is ≥0.5N·m, and the transmission chain is made of stainless steel. Daily maintenance includes wiping the track with a dry cloth every 3 months and replacing the lubricating oil once every 2 years (recommended to use lithium-based grease). Jiangyin Jiaxin's products offer a 5-year motor warranty, which can significantly reduce maintenance costs later on.

Summary of the full text reference

The selection of hollow glass with louvers should focus on the three core indicators: sealing, sound insulation, and durability. Jiangyin Jiaxin Glass Products extends the product life to over 15 years through technologies such as German equipment, double-sealing process, and high-torque motor, and provides full-process protection from inspection reports to quality assurance services. For buyers, prioritizing manufacturers that can provide actual test data, support third-party inspections, and have localization service capabilities can effectively avoid 90% of procurement risks.