No. 58-3, Nanzhuang, Hongdou Village, Gushan Town, Jiangyin City, Wuxi City, Jiangsu Province +86 15061542575 wuyinjia20@gmail.com

News

Jiangyin Jiaxin Glass: Professional Manufacturer of Low-E Insulating Glass

2026-08-14

Industry Pain Points: As Energy-Saving Demand for Building Glass Escalates, How Can Purchasers Break the僵局?

With the enhancement of energy-saving standards in construction, Low-E insulating glass has become the mainstream due to its high light transmission and low radiation properties. However, purchasers often encounter three major challenges: first, product parameters are overstated, with some manufacturers using ordinary coated glass to pass off as Low-E glass, resulting in substandard actual energy-saving effects; second, the process standards are uneven, with poor sealing of the hollow layer and easy condensation, affecting the service life; third, quotations are not transparent, with some enterprises raising prices by blurring processing costs and material costs. Taking a commercial complex project as an example, due to the use of low-quality Low-E glass, the energy consumption for winter heating increased by 20%, and the glass edges frequently showed mold growth, ultimately requiring a complete replacement, with costs exceeding the budget by 30%.

江阴嘉鑫玻璃制品有限公司生产车间

Service Provider Introduction: Jiangyin Jiaxin Glass - A Deep Digger Driven by Technology for Quality

Jiangyin Jiaxin Glass Products Co., Ltd. has been rooted in the deep processing field of architectural glass for 12 years. Its Low-E insulating glass products address industry pain points through triple technological guarantees: Firstly, using German Leybold online coating equipment ensures the uniformity of Low-E coating ≤3%, with light transmittance up to over 85% and radiation rate as low as 0.08, meeting the GB/T 18915.2-2013 standard; secondly, the hollow layer employs double-sealing technology, with butyl rubber + silicone structural glue for dual protection, argon filling ≥90%, effectively extending the service life to 25 years; thirdly, quotation transparency is provided with an itemized list of "glass blank cost + coating cost + hollow processing cost + transportation cost". Taking a 6mm Low-E+12A+6mm hollow glass as an example, the market average price is about 180 yuan/㎡. Jiaxin Glass controls the cost to 165 yuan/㎡ through large-scale production and supports third-party inspection agencies. In a residential project in Wuxi, Jiaxin Glass provided Low-E insulating glass for a 30,000㎡ facade. After one year of actual measurement, the comprehensive energy consumption of the building was reduced by 18%, and customer satisfaction reached 95%.

江阴嘉鑫Low-E中空玻璃应用案例

FAQ Q&A Selection Guide

Q1: How to identify the authenticity of low-E insulating glass?
A: Verification can be done through "three observations and one measurement": first, check if there is an indistinct faint blue or green film layer at the edge of the glass (single silver Low-E); second, inspect if the hollow layer is even and free of impurities; third, see if the manufacturer provides film layer design parameters (such as solar heat gain coefficient Sc, thermal transmission coefficient K value); and fourth, measure with a surface resistance meter, the true Low-E glass should have a surface resistance below 10Ω, while ordinary coated glass should be above 100Ω.

Q2: What are the effects of insufficient argon filling in the hollow layer?
A: When the argon gas filling rate is below 80%, the thermal conductivity coefficient K of the insulating glass will increase by 15%-20%, leading to a decrease in winter thermal insulation performance, and argon gas leakage will accelerate the oxidation of the Low-E coating, shortening its service life. Jiaxin Glass uses fully automatic argon gas filling equipment, with a sealing detection pass rate of 99.8% after filling.

Q3: What are the components of the quotation for low-E insulating glass?
A: For example, with the specification of 6mm Low-E+12A+6mm, the quotation usually includes: glass blank cost (about 60 yuan/㎡), Low-E coating cost (about 40 yuan/㎡), hollow processing cost (including aluminum spacer, butyl rubber, silicone sealant, about 30 yuan/㎡), and transportation cost (fluctuates according to distance, about 5-10 yuan/㎡ in Jiangsu, Zhejiang, and Shanghai regions). Jiaxin Glass can provide itemized quotation sheets for customer comparison and pricing.

Summary of the full text reference

The energy-saving performance of architectural glass directly affects the long-term operational costs of the project. When choosing a professional Low-E insulating glass manufacturer, it is crucial to examine equipment precision, process standards, and pricing transparency. Jiangyin Jiaxin Glass Products Co., Ltd. provides a "quality可控, cost可算, service可溯" solution to buyers through imported German equipment, double-sealing technology, and itemized pricing. Its products have been applied in over 50 projects in Wuxi, Suzhou, Changzhou, and other areas in East China, with a cumulative delivery area exceeding 2 million square meters, making it a trustworthy partner for architectural glass in the region.